2Wire WIRELESS PCI ADAPTER Installation Guide

Wireless PCI Adapter Driver Installation

These instructions describe the procedure to install the driver for the 2Wire Wireless PCI Adapter under
Microsoft Windows, and to run a wireless configuration program to configure your 2Wire Wireless PCI
Adapter to work with the 2Wire gateway. Windows 98SE, ME, 2000, and XP are supported.

Note: The driver software available for download is for new installations only. If you have already

used the driver software supplied on the CD to set up your 2Wire Wireless PCI Adapter, do not re­install the driver software.

Step 1: Installing the Driver

Windows XP

1. Ensure that your 2Wire Wireless PCI Adapter is not inserted in your computer. Download the driver

package file to your local hard disk.

2. Double-click the driver package file to extract all driver files. The driver installation files will be placed

on your hard disk in the C:\TWWGPCI_TEMP directory.

3. Insert your 2Wire Wireless PCI Adapter in your computer. The

Windows Found New Hardware Wizard will start. Select

from a list or specific location (Advanced)

.

Install

4. Click Next.

5. Select the Include this location in the search checkbox. Specify

C:\TWWGPCI_TEMP as the location of the driver.

6. Click Next.

7. Follow the on-screen instructions to complete the driver

installation.

8. Continue to Step 2: Wireless Configuration.

1

Wireless PCI Adapter Driver Installation

Windows 98SE, ME, and 2000

1. Ensure that your 2Wire Wireless PCI Adapter is not inserted in your computer. Download the driver

package file to your local hard disk.

2. Double-click the driver package file to extract all driver files. The driver installation files will be placed on

your hard disk in the C:\TWWGPCI_TEMP directory.

3. Insert your 2Wire Wireless PCI Adapter in your computer. The Windows Found New Hardware Wizard will

start. Select the option to search for the driver in a specific location. Specify C:\TWWGPCI_TEMP as the
driver location.

4. Follow the on-screen instructions to complete the driver installation. You may have to restart your

computer.

5. Continue to Step 2: Wireless Configuration.

Step 2: Wireless Configuration

1. From the C:\TWWGPCI_TEMP directory, run the WirelessCfg.exe program. To do so, click Start > Run.

The Windows

2. Folow the on-screen instructions to configure your wireless setting. Enter the 2Wire gateway’s serial

number and encryption key, located on the bottom of your 2Wire gateway.

Start button is typically located in the lower left-hand corner of the computer screen.

2