2N 916032 User guide
2N Access Unit Installation
Manual
v.2.16
www.2n.com
2N Access Unit Installation Manual
Content:
•
1. Product Overview
•
•
•
2. Description and Installation
•
•
•
•
•
•
3. Maintenance
•
4. Technical Parameters
•
•
5. Supplementary Information
•
•
•
•
1.1 Components and Associated Products
1.2 Terms and Symbols
2.1 Before You Start
2.2 Mechanical Installation
•
2.2.1 One Module Box
•
2.2.2 Two Module Box
•
2.2.3 Module dimensions
2.3 Electric Installation
•
2.3.1 Overvoltage Protection
2.4 Extending Module Connection
2.5 Mounting Completion
4.1 General drawings
5.1 Troubleshooting
5.2 Directives, Laws and Regulations
5.3 Other Countries' Legislation
5.4 General Instructions and Cautions
2N Access Unit Installation Manual
1. Product Overview
Here is what you can find in this section:
•
1.1 Components and Associated Products
•
1.2 Terms and Symbols
Basic Properties
2NAccess Unitis an elegant and reliable access IP system equipped with a number of useful
functions, which are not always common in devices of this category.
2NAccess Unitis a modular access system that meets all individual user needs. Unlike other
access systems available on the market,2NAccess Unitis not a single-module system with a
fixed functionality, but a user friendly modular system, allowing the user to assemble required
modules and accessories on a “plug and play” basis. This approach provides individual
configuration options and increase in functionality as necessary.
Keypadis a numeric keypad module that allows you to use the device for code lock switch
activation.
Integrated card reader moduleprovides the RFID card access control functionality. With
additional software settings, you can control more functions than the door lock using the card.
Electric lock switch –this switch can be can be controlled via a numeric keypad or Automation
actions. The switch can be completed with additional output modules if necessary. A wide range
of the switch mode settings provide an infinite number of applications.
Resistance–2NAccess Unitis designed as a robust, mechanically resistant access system,
which withstands any weather conditions without requiring additional accessories.
Installation of2NAccess Unitis very easy. All you have to do is assemble the required modules
and connect the system to your LAN via a mains cable. Being of the “plug and play” type, the
modules need not be configured individually. Feed the intercom either from a 12 V power supply
or directly from your PoE-supporting LAN.
To configure 2NAccess Unit, you need a PC equipped with any Internet browser. To manage
extensive intercom installations easily, use the2NAccess Commander.
Advantages of Use
•
Elegant design
•
Weather resistance
•
Variable mounting options (brick/plasterboard flush mounting, wall mounting)
•
Optional numeric keypad with backlight
•
Use of multiple modules of the same type – e.g. building entrance/exit card reader
2N Access Unit Installation Manual
•
Integrated electronic lock switches with wide setting options
•
Integrated RFID card reader module, Bluetooth module, fingerprint reader module or
touch keypad module
•
LAN (PoE) or external 12 V power supply
•
Configuration via web interface
•
HTTP server for configuration
•
SNTP client for server time synchronisation
•
SMTP client for e-mail sending
•
TFTP/HTTP client for automatic configuration and firmware update
1.1 Components and Associated Products
Basic Units
•
2N® Access Unit 2.0 125 kHz
•
2N Part No. 9160341
The card reader provides you with access control via
contactless cards or keyfobs. The module supports the 125
kHz EM4xxx.
2N Part No. 9160341US
Axis Part No. 02137-001
•
2N® Access Unit 2.0 125 kHz
•
The card reader provides you with access control via
contactless cards or keyfobs. The module supports the 125
kHz EM4xxx.
•
Reads HID Proximity
2N Access Unit Installation Manual
2N Part No. 9160342
Axis Part No. 02143-001
2N Part No. 9160342-S
Axis Part No. 02142-001
•
2N® Access Unit 2.0 13.56 MHz, NFC/HCE ready
•
The card reader module provides you with access control via
contactless cardsorkeyfobs. The module supports the
following 13.56 MHz cards or other carriers (only card serial
number is read):
•
ISO14443A (Mifare, DESFire)
•
PicoPass (HID iClass)
•
FeliCa
•
ST SR(IX)
•
2N®Mobile Key
•
2N® Access Unit 2.0 13.56 MHz, NFC/HCE ready
•
The card reader module provides you with access control via
contactless cardsorkeyfobs. The module supports the
following 13.56 MHz cards or other carriers (only card serial
number is read):
•
ISO14443A (Mifare, DESFire)
•
PicoPass (HID iClass)
•
FeliCa
•
ST SR(IX)
2N Part No. 916013
Axis Part No. 01368-001
•
2N®Mobile Key
•
HID SE (Seos, iClass SE, Mifare SE)
•
2N® Access Unit Bluetooth
•
The Bluetooth reader is used for reading users secure ID
numbers from the 2N®Mobile Key application of smart
phones Android and iOS.
2N Access Unit Installation Manual
2N Part No. 916031
Axis Part No. 02263-001
2N Part No. 916032
Axis Part No. 02262-001
•
2N® Access Unit 2.0 Fingerprint reader
•
The Fingerprint reader is used for verification of human
fingers for access control and intercom control.
•
2N® Access Unit 2.0 Touch keypad
•
The numeric touch keypad module helps you control the
lock and use other code-accessible functions. The keypad
digits and symbols are backlit.
2N Part No. 9160344
Axis Part No. 02138-001
•
2N®Access Unit 2.0 RFID – 125 kHz, 13.56 MHz, NFC/HCE
•
The card reader provides you with access control via
contactless cards or keyfobs. The module supports the 125
kHz EM-41xx.
•
The card reader module provides you with access control via
contactless cardsorkeyfobs. The module supports the
following 13.56 MHz cards or other carriers (only card serial
number is read):
•
125 kHz
•
EM4xxx
•
13.56 MHz
•
ISO14443A (Mifare, DESFire)
•
PicoPass (HID iClass)
•
FeliCa
•
ST SR(IX)
•
2N®Mobile Key
2N Access Unit Installation Manual
2N Part No. 9160344-S
Axis Part No. 02146-001
2N Part No. 9160335
Axis Part No. 02545-001
•
2N®Access Unit 2.0 RFID – 125 kHz, secured 13.56 MHz,
NFC/HCE
•
The card reader provides you with access control via
contactless cards or keyfobs. The module supports the 125
kHz EM-41xx.
•
The card reader module provides you with access control via
contactless cardsorkeyfobs. The module supports the
following 13.56 MHz cards or other carriers (only card serial
number is read):
•
125 kHz
•
EM4xxx
•
13.56 MHz
•
ISO14443A (Mifare, DESFire)
•
PicoPass (HID iClass)
•
FeliCa
•
ST SR(IX)
•
2N®Mobile Key
•
HID SE (Seos, iClass SE, Mifare SE)
•
2N®Access Unit 2.0 Bluetooth & RFID – 125 kHz, 13.56
MHz, NFC/HCE
•
The bluetooth card reader module provides you with access
control via contactless cards or keyfobs. The module
supports the following125 kHz and13.56 MHz cards or other
carriers (only card serial number is read):
•
125 kHz
•
EM4xxx
•
13.56 MHz
•
ISO14443A (Mifare, DESFire)
•
PicoPass (HID iClass)
•
FeliCa
•
ST SR(IX)
•
2N®Mobile Key
2N Access Unit Installation Manual
2N Part No. 9160335-S
Axis Part No. 01851-001
2N Part No. 9160336
Axis Part No. 02546-001
•
2N®Access Unit 2.0 Bluetooth & RFID – 125 kHz, secured
13.56 MHz, NFC/HCE
•
The bluetooth card reader module provides you with access
control via contactless cards or keyfobs. The module
supports the following125 kHz and13.56 MHz cards or other
carriers (only card serial number is read):
•
125 kHz
•
EM4xxx
•
13.56 MHz
•
ISO14443A (Mifare, DESFire)
•
PicoPass (HID iClass)
•
FeliCa
•
ST SR(IX)
•
2N®Mobile Key
•
HID SE (Seos, iClass SE, Mifare SE)
•
2N®Access Unit 2.0 Touch keypad & RFID – 125 kHz, 13.56
MHz, NFC/HCE
•
The touch keypad and card reader module provides you
with access control via contactless cards or keyfobs. The
module supports the following125 kHz and13.56 MHz cards
or other carriers (only card serial number is read):
•
125 kHz
•
EM4xxx
•
13.56 MHz
•
ISO14443A (Mifare, DESFire)
•
PicoPass (HID iClass)
•
FeliCa
•
ST SR(IX)
•
2N®Mobile Key
2N Access Unit Installation Manual
2N Part No. 9160336-S
Axis Part No. 01852-001
Tip
•
Supported auxiliary modules: 2N® IP Verso modules are supported – RFID card
reader (125 kHz; 13.56 MHz), keypad, 5-button module, Wiegand, etc.
•
2N®Access Unit 2.0 Touch keypad & RFID – 125 kHz,
secured 13.56 MHz, NFC/HCE
•
The touch keypad and card reader module provides you
with access control via contactless cards or keyfobs. The
module supports the following125 kHz and13.56 MHz cards
or other carriers (only card serial number is read):
•
125 kHz
•
EM4xxx
•
13.56 MHz
•
ISO14443A (Mifare, DESFire)
•
PicoPass (HID iClass)
•
FeliCa
•
ST SR(IX)
•
2N®Mobile Key
•
HID SE (Seos, iClass SE, Mifare SE)
License
2N Part No. 916012
Axis Part No.
01369-001
2N Part No. 9160401
•
2NAccess Unit license
•
2N Access Unit Lift module license
2N Access Unit Installation Manual
Frames
2N Part No. 9155011
Axis Part No. 01278-001
2N Part No.9155011B
Axis Part No. 01279-001
•
Flush mounting frame, 1-module
•
Covering frame for the 1-module brick/plasterboard
flush mounting box. This 1-module frame is used for
connection of an OUT card reader or keypad, for
example. Remember to order the frame when you
order a 1-module flush mounting box, Part No.
9155014.
•
Flush mounting frame, 1-module
•
Covering frame for the 1-module brick/plasterboard
flush mounting box. This 1-module frame is used for
connection of an OUT card reader or keypad, for
example. Remember to order the frame when you
order a 1-module flush mounting box, Part No.
9155014.
2N Part No. 9155012
Axis Part No. 01281-001
•
Flush mounting frame, 2-module
•
Covering frame for the 2-module brick/plasterboard
flush mounting box. Remember to order the frame
when you order a 2-module flush mounting box, Part
No. 9155015.
2N Access Unit Installation Manual
2N Part No.9155012B
Axis Part No. 01282-001
2N Part No. 9155021
Axis Part No. 01287-001
•
Flush mounting frame, 2-module
•
Covering frame for the 2-module brick/plasterboard
flush mounting box. Remember to order the frame
when you order a 2-module flush mounting box, Part
No. 9155015.
•
Wall mounting frame, 1-module
•
Covering frame for wall (surface) mounting.This 1module frame is used for connection of an OUT card
reader or keypad, for example.
2N Access Unit Installation Manual
2N Part No.9155021B
Axis Part No. 01288-001
•
Wall mounting frame, 1-module
•
Covering frame for wall (surface) mounting.This 1module frame is used for connection of an OUT card
reader or keypad, for example.
2N Access Unit Installation Manual
2N Part No. 9155022
Axis Part No. 01289-001
2N Part No.9155022B
•
Wall mounting frame, 2-module
•
Covering frame for wall (surface) mounting.
•
Wall mounting frame, 2-module
•
Covering frame for wall (surface) mounting.
Axis Part No. 01290-001
2N Access Unit Installation Manual
Tip
•
The 1-module frame is used when an auxiliary module from 2N® IP Verso is
mounted onto an extended interconnecting cable, for an OUT card reader or
keypad, for example.
Tip
•
Remember to order the flush mounting frame when you order a brick/plasterboard
flush mounting box:
•
1-module frame, Part No. 9155011 – 1-module flush mounting box, Part No.
9155014.
•
2-module frame, Part No. 9155012 –2-module flush mounting box, Part No.
9155015.
Extending Modules
2N Part No. 916020
•
RJ-45 adapter
Axis Part No. 01371-001
2N Part No.9155032
Axis Part No. 01255-001
•
2N®IP Verso – RFID Reader, 125 kHz
•
The card reader module works with 2NAccess Unitas
an OUT card reader. The module supports cards, key
fobs and/or other 125 kHz standard carriers: EM4xxx.
2N Access Unit Installation Manual
2N Part No. 9155040
Axis Part No. 01262-001
Part No. 9155082
•
2N®IP Verso– RFID Reader NFC/HCE support, 13.56
MHz
•
The card reader module works with 2NAccess Unit as
an OUT card reader. The module supports cards, key
fobs and/or other 13.56 MHz standard carriers (only
card serial number is read):
•
ISO14443A (Mifare, DESFire)
•
PicoPass (HID iClass)
•
FeliCa
•
ST SR(IX)
•
2N®Mobile Key
•
2N® IP Verso – Bluetooth & RFID reader 125 kHz,
13.56 MHz, NFC/HCE
•
The bluetooth and card reader module works with
2NAccess Unit as an OUT card reader. The module
supports cards, key fobs and/or other 125 kHz and
13.56 MHz standard carriers (only card serial number
is read):
•
125 kHz
•
EM4xxx
•
13.56 MHz
•
ISO14443A (Mifare, DESFire)
•
PicoPass (HID iClass)
•
FeliCa
•
ST SR(IX)
•
2N®Mobile Key
2N Access Unit Installation Manual
Part No. 9155084
Part No. 9155081
•
2N® IP Verso – Bluetooth & RFID reader 125 kHz,
secured 13.56 MHz, NFC/HCE
•
The bluetooth and secured card reader module works
with 2NAccess Unit as an OUT card reader. The
module supports cards, key fobs and/or other 125 kHz
and 13.56 MHz standard carriers (only card serial
number is read):
•
125 kHz
•
EM4xxx
•
13.56 MHz
•
ISO14443A (Mifare, DESFire)
•
PicoPass (HID iClass)
•
FeliCa
•
ST SR(IX)
•
2N®Mobile Key
•
HID SE (Seos, iClass SE, Mifare SE)
•
2N® IP Verso – Touch keypad & RFID reader 125 kHz,
13.56 MHz, NFC/HCE
•
The touch keypad and card reader module works with
2NAccess Unit as an OUT card reader. The module
supports cards, key fobs and/or other 125 kHz and
13.56 MHz standard carriers (only card serial number
is read):
•
125 kHz
•
EM4xxx
•
13.56 MHz
•
ISO14443A (Mifare, DESFire)
•
PicoPass (HID iClass)
•
FeliCa
•
ST SR(IX)
•
2N®Mobile Key
2N Access Unit Installation Manual
Part No. 9155083
2N Part No. 9155031
Axis Part No. 01253-001
•
2N® IP Verso – Touch keypad & RFID reader 125 kHz,
secured 13.56 MHz, NFC/HCE
•
The touch keypad and secured card reader module
works with 2NAccess Unit as an OUT card reader.
The module supports cards, key fobs and/or other 125
kHz and 13.56 MHz standard carriers (only card serial
number is read):
•
125 kHz
•
EM4xxx
•
13.56 MHz
•
ISO14443A (Mifare, DESFire)
•
PicoPass (HID iClass)
•
FeliCa
•
ST SR(IX)
•
2N®Mobile Key
•
HID SE (Seos, iClass SE, Mifare SE)
•
2N®IP Verso– Keypad
•
The numeric keypad module helps enter a numeric
entrance code. Use the keypad for departures or
double entrance authentication. The keypad digits
and symbols are backlit.
2N Access Unit Installation Manual
2N Part No.9155031B
Axis Part No. 01254-001
2N Part No.9155047
Axis Part No. 01277-001
•
2N®IP Verso– Keypad
•
The numeric keypad module helps enter a numeric
entrance code. Use the keypad for departures or
double entrance authentication. The keypad digits
and symbols are backlit.
•
2N®IP Verso– Touch keypad
•
The numeric keypad module helps you dial users via
their phonebook positions or phone numbers, control
the lock and use other code-accessible functions. The
keypad digits and symbols are backlit.
2N Part No.9155036
Axis Part No. 01275-001
•
2N® IP Verso – Touch Display
•
Touchscreen module allowing visitors to dial users in
a smartphone-like way. In addition to a structured
phonebook it also features a keypad.
Caution
•
This module is only supported by 2N Access
Unit 2.0.
2N Access Unit Installation Manual
2N Part No. 9155037
Axis Part No. 01259-001
•
2N®IP Verso– Wiegand
•
The Wiegand module helps you interconnect your
system with other systems (security) via the Wiegand
interface. The module is installed under another
module, i.e. cannot be installed directly into the2N
Access Unit(must be mounted outside).
2N Part No. 91550371
Axis Part No. 02577-001
2N Part No. 9155034
Axis Part No. 01257-001
•
2N®IPVerso– OSDP module
•
The OSDP moduleprovides communication between
a connected device (control panel, door controller)
and2N®IP Versovia the OSDP. The module is
installed under another module, i.e. needs no
separate position.
•
Compatible with Access Unit 2.0models only
•
2N®IP Verso – I/O
•
The logic input/output module helps you integrate
various sensors and control doors or other
equipment. The module is installed under another
module, i.e. cannot be installed directly into
the2NAccess Unit (must be mounted outside).
2N Access Unit Installation Manual
2N Part No.9155030
Axis Part No. 01252-001
Part Numbers:
9155050, 01267-001
9155054, 01268-001
9155055, 01269-001
•
2N® IP Verso – Info panel
•
The Infopanel module helps you add your company
logo, opening hours and similar information to the
access unit. The Infopanel has software-controlled
backlight.
•
1 m Interconnecting cable
•
3 m Interconnecting cable
•
5 m Interconnecting cable
Mounting Accessories
2N Part
No.9155014
Axis Part No.
01284-001
•
Flush mounting box, 1-module
•
The box is designed for brick/plasterboard flush mounting of a 1module installation. Supplied including accessories for multiple box
assemblies.
2N Access Unit Installation Manual
2N Part
No.9155015
Axis Part No.
01285-001
2N Part No.
9155061
•
Flush mounting box, 2-module
•
The box is designed for brick/plasterboard flush mounting of a 2module installation. Supplied including accessories for multiple box
assemblies.
•
Backplate, 1 module
•
A backplate for glass or uneven surface mounting.
Axis Part No.
01293-001
2N Access Unit Installation Manual
2N Part No.
9155062
Axis Part No.
01294-001
•
Backplate, 2 modules
•
A backplate for glass or uneven surface mounting.
Choose the appropriate mounting frame and box if necessary forthe 2NAccess Unit
installation. The 2NAccess Unit is designed for outdoor applications and requires no additional
roof.
Electric Locks
•
BEFO 11211
•
Part No.932071E
12 V / 230 mA DC
•
low consumption
2N Access Unit Installation Manual
Part No.932081E
Part No.932091E
•
BEFO 11221 with momentum pin
•
12 V / 230 mA DC
•
low consumption
•
For opening of the lock a short electrical impuls is
sufficient, which unlocks the lock. Lock is then open
until someone closes the door.
•
BEFO 11211MB with mechanical blocking
•
12 V / 230 mA DC
•
low consumption
•
Enables mechanically close or open the lock. When
opened, the lock is open all the time. When closed, it
behaves as standart electrical lock.
2N Access Unit Installation Manual
Part No. 932061E
Part No. 932072E
•
211211 door signalling, low consumption
•
12 V / 230 mA
•
A regular lock with a built-in contact to indicate
whether the door is open or closed.
•
31211 fail-safe
•
12 V / 170 mA DC
•
The failsafe lock is closed when electricity is switched
on. When electricity is interrupted, the lock is opened.
Part No. 932062E
•
321211 fail-safe, door signalling
•
12 V / 170 mA
•
The failsafe lock is closed when electricity is switched
on. When electricity is interrupted, the lock is opened.
•
It contains a built-in contact to indicate whether the
door is open or closed.
2N Access Unit Installation Manual
Tip
•
FAQ:Electric locks – Differences between locks for 2N IP intercoms
Power Supply
Part Numbers:
91378100E
91378100US,
01403-001
•
PoE injetor – with EU cable
•
PoE injector – with US cable
•
For intercom power supply viaan Ethernetcable where the PoE switch
is unavailable.
Part No.
91341482E
91341482US
Part
No.932928
•
Stabilized 12 V / 1 A power supply needs to be used where no PoE is
available.
•
For external power supply of the lock with 12 V AC voltage.
2N Access Unit Installation Manual
Additional Modules
2N Part No.9159010
Axis Part No. 01386-001
Part No. 9159013
•
Security relay
•
A simple, security enhancing add-on. Prevents lock
tampering. Installed between the intercom, from
which it is also supplied, and the lock to be controlled.
•
Departure button
•
Connects the logic input for door unlocking from
inside the building.
2N Part No. 9159012
Axis Part No. 01388-001
•
Magnetic door contact
•
A door installation set for door opening status
identification. Used for door protection, open door or
violent door opening detection.
2N Access Unit Installation Manual
2N Part No.9134173
Axis Part No. 01384-001
•
RFID card, type Mifare Classic 1k, 13.56 MHz
2N Access Unit Installation Manual
2N Part No.9134174
Axis Part No. 01385-001
2N Part No.9134165E
Axis Part No. 01395-001
•
RFID fob, type Mifare Classic 1k, 13.56 MHz
•
RFID card, type EM4100, 125 kHz
2N Part No.9134166E
Axis Part No. 01396-001
•
RFID fob, type EM4100, 125 kHz
2N Access Unit Installation Manual
2N Part No.9137420E
Axis Part No. 01399-001
•
External RFID card reader for connection to PC using a
USB interface.
•
Suitable for system administration and adding of 125
kHz EM41xx cards using a web interface or 2N®Access
Commander.
2N Access Unit Installation Manual
2N Part No. 9137421E
Axis Part No. 01400-001
•
Ext. RFID Reader 13.56 MHz, 125 kHz + NFC/HCE
(USB interface)
•
External RFID card reader for PC connection using a
USB interface. Suitable for system administration and
adding of 13.56 MHz, 125 kHz cards and Android
platform devices supporting NFC/HCE using the 2N IP
intercom web interface or 2N® Access Commander. It
reads the same types of cards and devices as card
readers in the 2N IP intercoms.
•
13.56 MHz/ISO/IEC 14443A Mifare Classic 1k &
4k, DESFire EV1, Mini, Plus S&X, Ultralight,
Ultralight C
•
13.56 MHz/ISO/IEC 14443B CEPAS, HID iCLASS
(CSN only)
•
13.56 MHz/JIS X 6319 Felica
•
ISO/IEC 18092 SmartPhone with NFC/HCE
support, since Android version 6.0 Marshmallow
(2N® Mobile Key app required)
•
EMarine
Loading...