5-14
Parts Manual
Rev.
09/2007
5/14 & 8/14
Series Chipper/Shredders
TP 400-4096-01-CS-S
Mf
g
. No. Descri
p
tion
Attachment
1694678 8/14 Chipper/Shredder
1694896 814 Chipper/Shredder
1694897 5515 Chipper/Shredder
1694898 5/14 Chipper/Shredder (CE/Export)
1694910 5514 Chipper/Shredder
1731143
Part No.:
Table Of Content
s
Torque Specification Chart ..................................................................... Inside Back Cover
PRODUCT COMPONENTS PAGES
Hopper & Engine Group - Models 5/14 & 8/14 ....................................................................................................
4
Housing & Rotor Group - Models 5/14 & 8/14 .....................................................................................................
8
VK 5 Vacuum Kit for 5C, 5/14, & 8/14 Models .....................................................................................................
10
Hopper & Engine Group - Models 5/14 & 8/14
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
4096heg
The above parts group applies to the following Mfg. Nos.:
4
2007Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
1694678 - 8/14 Chi
pp
er/Shredder
1694896 - 814 Chipper/Shredder
1694897 - 5515 Chi
pp
er/Shredder
1694898 - 5/14 Chi
pp
er/Shredder
(
CE/Ex
p
ort
)
1694910 - 5514 Chi
pp
er/Shredder
TP 400-4096-01-CS-S
PART NO. DESCRIPTIONREF NO QTY.
Hopper & Engine Group - Models 5/14 & 8/14
Footnotes
SCREW, Hex, Button Hd., 1/4-20 x 3/4 (Qty.10 used on CE models) 1 1960507SM 14
RETAINING STRIP, Hopper Guard 2 1098100SM 1
GUARD, Hopper 3 1095100SM 1
SUPPORT, Hopper Guard 4 1709603SM 1
COLLECTION BAG, 24" x 34" 5 1709403SM 1
HANDLE 6 1729181SM 1
CAPSCREW, Hex, 1/4-20 x 1, Gr. 5 (CE Models Only) 7 1921960SM 8
CAPSCREW, Hex, 5/16-18 x 3-1/4, Gr.5 8 1926106SM 1
DECAL, Danger, Rotating Cutting Blades, Warning, Debris 9 1732181 2
DECAL, Caution, Rotating Cuttinb Blades, Warning, Debris (CE Models Only) 9 1731921 2
DEFLECTOR 10 1729194SM 1
DEFLECTOR, Fixed (CE Models Only) 10 1709556SM 1
DECAL, Caution, Do Not Operate Without Bag Attached (CE Models Only) 11 1731921 2
NUT, Whiz, 5/16-18 12 1931277SM 20
WASHER, Plain, 17/32Plain, 17/32 x 1-1/4 x 5/64 13 1924361SM 2
WHEEL & TIRE ASSEMBLY, 1-3/4 x 12 (5/14 Only) 14 1714250SM 2
WHEEL & TIRE ASSEMBLY, 2-1/4 x 12 (8/14 Only) 14 1714250SM 2
PUSH NUT, 1/2 15 1960519SM 2
CAPSCREW, Hex, 5/16-18 x 5/8 16 1925205SM 10
SCREW, Taptite, 3/8 16 x 1-1/4 17 1928635SM 2
ROD LEG 18 1713099SM 1
CASTING, Chipper Cone, 3" 19 1713272SM 1
NUT, Flange, 2-Way Lock, 1/4-20 (Qty.10 used on CE model) 20 1930642SM 14
WASHER, Plain, 17/64 x 5/18 x 31/64 21 1921319SM 6
SCREW, Round Head, Phillips, 1/4-20 x 1/2 (CE Models Only) 22 1926025SM 2
INSERT, Cone (CE model only) 23 1709729SM 1
CONE, Chipper, Red 24 1709468SM 1
CONE, Chipper, Red (CE Models Only) 24 1709409SM 1
ENGINE PLATE ASSEMBLY 25 1714085SM 1
ENGINE, 5HP, Briggs & Stratton Model # 135212, Type # 0196-01 26 * 1
ENGINE, 8HP, Briggs & Stratton Model # 201412, Type # 9238-72 26 * 1
SHIELD 27 2118403SM 1
LOCKWASHER, 5/16 28 1917356SM 4
CAPSCREW, Hex Head, 5/16-24 x 3/4 29 1921515SM 4
DECAL, 5/14, Simplicity 30 1713214SM 1
DECAL, 8/14, Simplicity Pro 30 1714113SM 1
WASHER, Plain, 1/4 x 1-1/4 x 5/64 (CE Models Only) 31 1960151SM 12
HOPPER HALF, Upper (CE Models Only) 32 1709561SM 2
SAFETY GOGGLES 33 1729013SM 1
NUT, Flange Whiz Lock, 5/16-18 (CE Models Only) 34 1927557SM 2
SCREW, Truss Head, 5/16-18 x 3/4 (CE Models Only) 35 1918249SM 2
HOPPER, Red 36 1713521SM 1
HOPPER, Red (CE Models Only) 36 1713521SM 1
DECAL, Danger, Rotating Cutting Blades, Warning, Debris 37 1732039 2
Note* See your local Briggs & Stratton dealer for service parts.
The above parts group applies to the following Mfg. Nos.:
5
2007Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
1694678 - 8/14 Chi
pp
er/Shredder
1694896 - 814 Chipper/Shredder
1694897 - 5515 Chi
pp
er/Shredder
1694898 - 5/14 Chi
pp
er/Shredder
(
CE/Ex
p
ort
)
1694910 - 5514 Chi
pp
er/Shredder
TP 400-4096-01-CS-S
Loading...