John Deere 444J, 4045H Specifications

0 (0)

Specifications


Engine	444J
Manufacturer and Model . . . . . . . . . . . . . . . . . . . .	John Deere PowerTech ETM 4045H
Non-Road Emission Standards . . . . . . . . . . . . . . . .	certified to EPA Tier 3 emissions
Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	4
Valves Per Cylinder. . . . . . . . . . . . . . . . . . . . . . . . .	2
Displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	276 cu. in. (4.5 L)
Net Peak Power (ISO9249) . . . . . . . . . . . . . . . . . . .	128 hp (95 kW) @ 2,000 rpm
Net Peak Torque (ISO9249). . . . . . . . . . . . . . . . . . .	380 lb.-ft. (515 Nm) @ 1,400 rpm
Net Torque Rise . . . . . . . . . . . . . . . . . . . . . . . . . . .	32%
Fuel System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	high-pressure common rail
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	full-flow spin-on filter and integral cooler
Aspiration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	turbocharged, charge air cooled
Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	dual element dry type, restriction indicator in cab monitor for service
Fan Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	hydraulically driven, proportionally controlled, fan aft of coolers
Electrical System . . . . . . . . . . . . . . . . . . . . . . . . . .	24 volt with 80-amp alternator
Batteries (two 12 volt) . . . . . . . . . . . . . . . . . . . . . .	950 CCA
Transmission
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	countershaft-type PowerShiftTM
Torque Converter . . . . . . . . . . . . . . . . . . . . . . . . . .	single stage, single phase
Shift Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	electronically modulated, adaptive, load and speed dependent
Operator Interface . . . . . . . . . . . . . . . . . . . . . . . . .	steering-column or hydraulic joystick-mounted F-N-R and gear-select lever, kick-down button on hydraulic lever
Shift Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	quick-shift button with two selectable modes: auto/manual, auto to 1st or 2nd, kick down or kick down/up, three clutch cutoff settings adjustable
	on switch pad
Travel Speeds*	Forward	Reverse
Gear 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	4.5 mph (7.2 km/h)	4.7 mph (7.6 km/h)
Gear 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	7.7 mph (12.4 km/h)	8.1 mph (13.0 km/h)
Gear 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	14.9 mph (24.0 km/h)	15.7 mph (25.3 km/h)
Gear 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	23.4 mph (37.7 km/h)
*Equipped with 17.5-25 tires.
Axles/Brakes
Final Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	heavy-duty mid-board planetary
Differentials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	hydraulic locking front, conventional rear — standard; dual locking front and rear — optional
Rear Axle Oscillation, Stop to Stop* . . . . . . . . . . . .	24 deg.
Brakes (conform to SAE J1473, ISO3450)
Service Brakes . . . . . . . . . . . . . . . . . . . . . . . .	hydraulically actuated, mid-board, self adjusting, wet multi-disc
Parking Brake . . . . . . . . . . . . . . . . . . . . . . . . .	automatic spring applied, hydraulically released, oil cooled, multi-disc
*Equipped with 17.5-25 tires.
Tires
Choice of (with three-piece rims)	Tread Width	Width Over Tires	Change In Vertical Height
17.5 R 25, L-3T. . . . . . . . . . . . . . . . . . . . . . . .	74.8 in. (1900 mm)	92.4 in. (2348 mm)	0 in. (0 mm)
17.5 R 25, L-2. . . . . . . . . . . . . . . . . . . . . . . . .	74.8 in. (1900 mm)	92.9 in. (2360 mm)	– 0.1 in. (– 3 mm)
17.5-25, 12 PR L-3 . . . . . . . . . . . . . . . . . . . . .	74.8 in. (1900 mm)	92.8 in. (2357 mm)	+ 0.1 in. (+ 3 mm)
17.5-25, L-2* . . . . . . . . . . . . . . . . . . . . . . . . .	74.8 in. (1900 mm)	92.8 in. (2357 mm)	+ 0.1 in. (+ 3 mm)
17.5-25, L-2 . . . . . . . . . . . . . . . . . . . . . . . . . .	74.8 in. (1900 mm)	92.8 in. (2357 mm)	+ 0.1 in. (+ 3 mm)
20.5-25, 12 PR L-2 . . . . . . . . . . . . . . . . . . . . .	76.8 in. (1950 mm)	98.1 in. (2492 mm)	+ 3.6 in. (+ 91 mm)
20.5-25, 1 Star L-2 Radial. . . . . . . . . . . . . . . .	76.8 in. (1950 mm)	97.7 in. (2482 mm)	+ 2.6 in. (+ 67 mm)
550/65 R 25, 1 Star L-2 . . . . . . . . . . . . . . . . .	76.8 in. (1950 mm)	98.0 in. (2490 mm)	+ 1.0 in. (+ 27 mm)
*Equipped with one-piece rims.

Refill Capacities (U.S.)

Fuel Tank (with ground-level fueling) . . . . . . . . . . . 65 gal. (246 L)

Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 qt. (19 L)

Engine Oil with Vertical Spin-On Filter. . . . . . . . . . . 18.5 qt. (17.5 L)

PAGES

14–15

Refill Capacities (U.S.) (continued)	444J
PowerShift Transmission, Including Filter . . . . . . . .	19.5 qt. (18.5 L)
Differential (front and rear, each axle). . . . . . . . . . .	23 qt. (22 L)
Hydraulic Reservoir and Filters . . . . . . . . . . . . . . . .	25.5 gal. (96.5 L)
Wet-Disc Parking Brake . . . . . . . . . . . . . . . . . . . . .	10 oz. (0.3 L)
Hydraulic System/Steering
Pump (loader and steering). . . . . . . . . . . . . . . . . . .	variable-displacement, axial-piston pump; closed-center, pressure-compensating system
Maximum Rated Flow . . . . . . . . . . . . . . . . . . .	37 gpm (140 L/m) @ 1,000 psi (6895 kPa)
System Relief Pressure (loader and
steering) . . . . . . . . . . . . . . . . . . . . . . . . . .	3,600 psi (24 821 kPa)
Loader Controls . . . . . . . . . . . . . . . . . . . . . . . . . . .	two-function valve; singleor dual-lever controls; control lever lockout feature; optional thirdand fourth-function valve with auxiliary lever
Steering (conforms to SAE J1511)
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	power, fully hydraulic
Articulation Angle . . . . . . . . . . . . . . . . . . . . . .	80-deg. arc (40 deg. each direction)
Hydraulic Cycle Times	Standard Z-Bar	High-Lift Z-Bar
Raise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	5.6 sec.	5.6 sec.
Dump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	1.0 sec.	1.7 sec.
Lower (float down) . . . . . . . . . . . . . . . . . . . . .	2.4 sec.	2.4 sec.
Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	9.0 sec.	9.7 sec.
Maximum Lift Capacity. . . . . . . . . . . . . . . . . . . . . .	with 2.0-cu.-yd. (1.5 m3) bucket with bolt-on edge
Lift at Ground Level . . . . . . . . . . . . . . . . . . . . .	22,403 lb. (10 162 kg)	18,912 lb. (8578 kg)
Lift at Maximum Height . . . . . . . . . . . . . . . . . .	10,719 lb. (4862 kg)	10,575 lb. (4797 kg)
Turning Radius (measured to centerline of
outside tire) . . . . . . . . . . . . . . . . . . . . . . . . . . .	15 ft. 5 in. (4.70 m)	15 ft. 5 in. (4.70 m)
Dimensions with Pin-On Bucket
	Standard Z-Bar	High-Lift Z-Bar

A	Height to Top of Cab and Canopy. . . . . .	. . . . . . 10 ft. 5 in. (3.15 m)	10 ft. 5 in. (3.15 m)
B	Height to Top of Exhaust . . . . . . . . . . . .	. . . . . . 10 ft. 4 in. (3.14 m)	10 ft. 4 in. (3.14 m)
C	Ground Clearance . . . . . . . . . . . . . . . . .	. . . . . . 15.6 in. (396 mm)	15.6 in. (396 mm)
D	Length from Centerline to Front Axle . . .	. . . . . . 4 ft. 6 in. (1.37 m)	4 ft. 6 in. (1.37 m)
E	Wheelbase . . . . . . . . . . . . . . . . . . . . . .	. . . . . . 9 ft. 0 in. (2.75 m)	9 ft. 0 in. (2.75 m)
F	Dump Clearance . . . . . . . . . . . . . . . . . .	. . . . . . ▲ (see page 17)	▲ (see page 18)
G	Height to Hinge Pin, Fully Raised . . . . . .	. . . . . . 11 ft. 10 in. (3.61 m)	13 ft. 0 in. (3.96 m)
H	Dump Reach . . . . . . . . . . . . . . . . . . . . .	. . . . . . ▲▲ (see page 17)	▲▲ (see page 18)
I	Maximum Digging Depth. . . . . . . . . . . .	. . . . . . 3.4 in. (86 mm)	4.1 in. (104 mm)
J	Overall Length. . . . . . . . . . . . . . . . . . . .	. . . . . . ▲▲▲ (see page 17)	▲▲▲ (see page 18)
K	Maximum Rollback at Ground Level . . .	. . . . . . 39 deg.	39 deg.
L	Maximum Rollback, Boom Fully Raised .	. . . . . . 55 deg.	55 deg.
M Maximum Bucket Angle, Fully Raised . .		. . . . . . 50 deg.	50 deg.
	L
	45˚
	M
		H
	G
	F
	K
	I	D	C
	I		E

Cab and Canopy

B A

444J LOADER WITH QUICK-COUPLER AND HOOK-ON BUCKET

444J LOADER WITH QUICK-COUPLER

AND HOOK-ON CONSTRUCTION FORK

PAGES

16–17

Standard Z-Bar Pin-On
Type Bucket Information	444J
	General Purpose
Bucket Type/Size	w/Bolt-On Edge
Capacity, Heaped SAE . . . . . . . . . . . . . . . . . . .	2.5 cu. yd. (1.9 m3)
Capacity, Struck SAE . . . . . . . . . . . . . . . . . . . .	2.1 cu. yd. (1.6 m3)
Bucket Weight . . . . . . . . . . . . . . . . . . . . . . . . .	1,973 lb. (895 kg)
Bucket Width . . . . . . . . . . . . . . . . . . . . . . . . . .	8 ft. 4 in. (2.55 m)
Breakout Force, SAE J732C . . . . . . . . . . . . . . .	18,104 lb. (8212 kg)
Tipping Load, Straight . . . . . . . . . . . . . . . . . . .	20,554 lb. (9323 kg)
Tipping Load, 40-Deg. Full Turn . . . . . . . . . . . .	18,263 lb. (8284 kg)
Reach, 45-Deg. Dump, 7-ft. (2.13 m)
Clearance . . . . . . . . . . . . . . . . . . . . . . . . .	4 ft. 8 in. (1.42 m)
▲▲ Reach, 45-Deg. Dump, Full Height. . . . . . . . . .	3 ft. 4 in. (1.02 m)
▲ Dump Clearance, 45 Deg., Full Height . . . . . . .	8 ft. 9 in. (2.67 m)
▲▲▲ Overall Length, Bucket on Ground . . . . . . . . . .	22 ft. 2 in. (6.76 m)
Loader Clearance Circle, Bucket In Carry
Position . . . . . . . . . . . . . . . . . . . . . . . . . .	36 ft. 3 in. (11.05 m)
Operating Weight. . . . . . . . . . . . . . . . . . . . . . .	24,561 lb. (11 141 kg)

Loader operating information is based on machine with standard equipment; cab; rear cast bumper/counterweight; 17.5 R 25 tires; ROPS cab; 175-lb. (79 kg) operator; and full fuel tank. This information is affected by tire size, ballast, and different attachments.

Adjustments to Operating Weights with Standard Z-Bar Pin-On Buckets

Adjustments to operating weights and tipping loads for 2.5-cu.-yd. (1.9 m3) general-purpose bucket with bolt-on cutting edge and optional rear cast bumper/counterweight

Add (+) or deduct (–) lb. (kg) as indicated for				Tipping Load, 40-
loaders with three-piece rims and		Operating Weight	Tipping Load, Straight	Deg. Full Turn, SAE
17.5	R 25, L-3T tires . . . . . . . . . . . . . . . . . . . .	0 lb. (0 kg)	0 lb. (0 kg)	0 lb. (0 kg)
17.5	R 25, L-2 tires . . . . . . . . . . . . . . . . . . . . .	– 196 lb. (– 89 kg)	– 141 lb. (– 64 kg)	– 138 lb. (– 63 kg)
17.5	R 25, 12 PR L-3 tires. . . . . . . . . . . . . . . .	– 426 lb. (– 193 kg)	– 302 lb. (– 137 kg)	– 300 lb. (– 136 kg)
17.5-25, L-2 tires* . . . . . . . . . . . . . . . . . . . . .		– 625 lb. (– 283 kg)	– 445 lb. (– 202 kg)	– 441 lb. (– 200 kg)
17.5-25, L-2 tires . . . . . . . . . . . . . . . . . . . . . .		– 364 lb. (– 165 kg)	– 258 lb. (– 117 kg)	– 256 lb. (– 116 kg)
20.5-25, 12 PR L-2 tires**. . . . . . . . . . . . . . . .		+ 328 lb. (+ 149 kg)	+ 256 lb. (+ 116 kg)	+ 251 lb. (+ 114 kg)
20.5-25, 1 Star L-2 Radial tires** . . . . . . . . . .		+ 514 lb. (+ 240 kg)	+ 388 lb. (+ 176 kg)	+ 381 lb. (+ 173 kg)
550/65 R 25, 1 Star L-2 tires** . . . . . . . . . . . .		+ 443 lb. (+ 201 kg)	+ 337 lb. (+ 153 kg)	+ 333 lb. (+ 151 kg)
CaCl2 in 17.5-25 rear tires** . . . . . . . . . . . . . .		+ 1,184 lb. (+ 537 kg)	+ 1,684 lb. (+ 764 kg)	+ 1,486 lb. (+ 674 kg)
Optional rear cast bumper/counterweight
	(removed) . . . . . . . . . . . . . . . . . . . . . . . . .	– 229 lb. (– 104 kg)	– 461 lb. (– 209 kg)	– 368 lb. (– 176 kg)
*Equipped with one-piece rims.

**CaCl2 not recommended with 20.5 R2 5, 20.5-25, and 65 R 25 tires.

Standard Z-Bar Information with Quick-Coupler and Hook-On Bucket

	General Purpose	General Purpose
Bucket Type/Size	w/Bolt-On Edge	w/Bolt-On Edge
Capacity, Heaped SAE . . . . . . . . . . . . . . . . . . .	2.5 cu. yd. (1.9 m3)	2.0 cu. yd. (1.5 m3)
Capacity, Struck SAE . . . . . . . . . . . . . . . . . . . .	2.1 cu. yd. (1.6 m3)	1.6 cu. yd. (1.2 m3)
Bucket Weight (with coupler) . . . . . . . . . . . . . .	2,756 lb. (1250 kg)	2,654 lb. (1204 kg)
Bucket Width . . . . . . . . . . . . . . . . . . . . . . . . . .	8 ft. 4 in. (2.55 m)	8 ft. 4 in. (2.55 m)
Breakout Force, SAE J732C . . . . . . . . . . . . . . .	14,762 lb. (6696 kg)	15,765 lb. (7151 kg)
Tipping Load, Straight . . . . . . . . . . . . . . . . . . .	18,541 lb. (8410 kg)	18,309 lb. (8305 kg)
Tipping Load, 40-Deg. Full Turn, SAE . . . . . . . .	16,395 lb. (7437 kg)	16,398 lb. (7348 kg)
Reach, 45-Deg. Dump, 7-ft. (2.13 m)
Clearance . . . . . . . . . . . . . . . . . . . . . . . . .	4 ft. 11 in. (1.49 m)	4 ft. 10 in. (1.46 m)
▲▲ Reach, 45-Deg. Dump, Full Height. . . . . . . . . .	3 ft. 10 in. (1.16 m)	3 ft. 8 in. (1.11 m)
▲ Dump Clearance, 45 Deg., Full Height . . . . . . .	8 ft. 4 in. (2.54 m)	8 ft. 6 in. (2.58 m)
▲▲▲ Overall Length, Bucket on Ground . . . . . . . . . .	22 ft. 10 in. (6.96 m)	22 ft. 7 in. (6.88 m)
Loader Clearance Circle, Bucket In Carry
Position . . . . . . . . . . . . . . . . . . . . . . . . . .	39 ft. 9 in. (12.12 m)	36 ft. 6 in. (11.13 m)
Operating Weight. . . . . . . . . . . . . . . . . . . . . . .	25,386 lb. (11 515 kg)	25,283 lb. (11 486 kg)

Standard Z-Bar Information with Quick-
Coupler and Hook-On Construction Fork	444J
▲ Tine Length . . . . . . . . . . . . . . . . . . . . . . . . . . .	48 in. (1.22 m)	60 in. (1.52 m)
▲▲ Overall Length . . . . . . . . . . . . . . . . . . . . . . . . .	24 ft. 4 in. (7.42 m)	25 ft. 4 in. (7.72 m)
Tipping Load, Straight (fork level, load
centered 24 in. [610 mm] forward
on tine). . . . . . . . . . . . . . . . . . . . . . . . . . .	13,693 lb. (6211 kg)	12,696 lb. (5759 kg)
Tipping Load, 40-Deg. Full Turn (fork
level, load centered 24 in. [610 mm]
forward on tine) . . . . . . . . . . . . . . . . . . . .	12,144 lb. (5508 kg)	11,228 lb. (5093 kg)
Operating Weight. . . . . . . . . . . . . . . . . . . . . . .	24,787 lb. (11 243 kg)	25,122 lb. (11 395 kg)
High-Lift Z-Bar Pin-On-Type Bucket Information
	General Purpose
Bucket Type/Size	w/Bolt-On Edge
Capacity, Heaped SAE . . . . . . . . . . . . . . . . . . .	2.5 cu. yd. (1.9 m3)
Capacity, Struck SAE . . . . . . . . . . . . . . . . . . . .	2.1 cu. yd. (1.6 m3)
Bucket Weight . . . . . . . . . . . . . . . . . . . . . . . . .	1,973 lb. (894 kg)
Bucket Width . . . . . . . . . . . . . . . . . . . . . . . . . .	8 ft. 4 in. (2.55 m)
Breakout Force, SAE J732C . . . . . . . . . . . . . . .	16,655 lb. (7555 kg)
Tipping Load, Straight . . . . . . . . . . . . . . . . . . .	17,469 lb. (7924 kg)
Tipping Load, 40-Deg. Full Turn, SAE . . . . . . . .	15,483 lb. (7023 kg)
Reach, 45-Deg. Dump, 7-ft. (2.13 m)
Clearance . . . . . . . . . . . . . . . . . . . . . . . . .	5 ft. 9 in. (1.76 m)
▲▲ Reach, 45-Deg. Dump, Full Height. . . . . . . . . .	3 ft. 5 in. (1.05 m)
▲ Dump Clearance, 45 Deg., Full Height . . . . . . .	10 ft. 0 in. (3.05 m)
▲▲▲ Overall Length, Bucket on Ground . . . . . . . . . .	23 ft. 5 in. (7.14 m)
Loader Clearance Circle, Bucket In Carry
Position . . . . . . . . . . . . . . . . . . . . . . . . . .	37 ft. 5 in. (11.40 m)
Operating Weight. . . . . . . . . . . . . . . . . . . . . . .	24,809 lb. (11 253 kg)

Adjustments to Operating Weights with High-Lift Z-Bar Pin-On Buckets

Adjustments to operating weights and tipping loads for 2.5-cu.-yd. (1.9 m3) general-purpose bucket with bolt-on cutting edge and optional rear cast bumper/counterweight

Add (+) or deduct (–) lb. (kg) as indicated for				Tipping Load, 40-
loaders with three-piece rims and		Operating Weight	Tipping Load, Straight	Deg. Full Turn, SAE
17.5	R 25, L-3T tires . . . . . . . . . . . . . . . . . . . .	0 lb. (0 kg)	0 lb. (0 kg)	0 lb. (0 kg)
17.5	R 25, L-2 tires . . . . . . . . . . . . . . . . . . . . .	– 196 lb. (– 89 kg)	– 121 lb. (– 55 kg)	– 119 lb. (– 54 kg)
17.5	R 25, L-3 tires . . . . . . . . . . . . . . . . . . . . .	– 425 lb. (– 193 kg)	– 262 lb. (– 119 kg)	– 260 lb. (– 118 kg)
17.5-25, L-2 tires* . . . . . . . . . . . . . . . . . . . . .		– 624 lb. (– 283 kg)	– 386 lb. (– 175 kg)	– 384 lb. (– 174 kg)
17.5-25, L-2 tires . . . . . . . . . . . . . . . . . . . . . .		– 362 lb. (– 164 kg)	– 223 lb. (– 101 kg)	– 220 lb. (– 100 kg)
20.5-25, 12 PR L-2 tires**. . . . . . . . . . . . . . . .		+ 331 lb. (+ 150 kg)	+ 223 lb. (+ 101 kg)	+ 218 lb. (+ 99 kg)
20.5-25, 1 Star L-2 Radial tires** . . . . . . . . . .		+ 516 lb. (+ 234 kg)	+ 337 lb. (+ 153 kg)	+ 331 lb. (+ 150 kg)
550/65 R 25, 1 Star L-2 tires** . . . . . . . . . . . .		+ 443 lb. (+ 201 kg)	+ 293 lb. (+ 133 kg)	+ 289 lb. (+ 131 kg)
CaCl2 in 17.5-25 rear tires** . . . . . . . . . . . . . .		+ 1,183 lb. (+ 537 kg)	+ 1,462 lb. (+ 663 kg)	+ 1,291 lb. (+ 586 kg)
Optional rear cast bumper/counterweight
	(removed) . . . . . . . . . . . . . . . . . . . . . . . . .	– 229 lb. (– 104 kg)	– 461 lb. (– 209 kg)	– 368 lb. (– 176 kg)
*Equipped with one-piece rims.

**CaCl2 not recommended with 20.5 R 25, 20.5-25, and 65 R 25 tires.

PAGES

18–19

High-Lift Z-Bar Information with
Quick-Coupler and Hook-On Bucket	444J
	General Purpose	General Purpose
Bucket Type/Size	w/Bolt-On Edge	w/Bolt-On Edge
Capacity, Heaped SAE . . . . . . . . . . . . . . . . . . .	2.5 cu. yd. (1.9 m3)	2.0 cu. yd. (1.5 m3)
Capacity, Struck SAE . . . . . . . . . . . . . . . . . . . .	2.1 cu. yd. (1.6 m3)	1.6 cu. yd. (1.2 m3)
Bucket Weight (with coupler) . . . . . . . . . . . . . .	2,756 lb. (1250 kg)	2,575 lb. (1168 kg)
Bucket Width . . . . . . . . . . . . . . . . . . . . . . . . . .	8 ft. 4 in. (2.55 m)	8 ft. 4 in. (2.55 m)
Breakout Force, SAE J732C . . . . . . . . . . . . . . .	13,552 lb. (6147 kg)	14,502 lb. (6578 kg)
Tipping Load, Straight . . . . . . . . . . . . . . . . . . .	15,652 lb. (7100 kg)	16,071 lb. (7290 kg)
Tipping Load, 40-Deg. Full Turn, SAE . . . . . . . .	13,785 lb. (6253 kg)	14,118 lb. (6404 kg)
Reach, 45-Deg. Dump, 7-ft. (2.13 m)
Clearance . . . . . . . . . . . . . . . . . . . . . . . . .	5 ft. 11.5 in. (1.82 m)	5 ft. 11 in. (1.80 m)
▲▲ Reach, 45-Deg. Dump, Full Height. . . . . . . . . .	3 ft. 10 in. (1.18 m)	3 ft. 9 in. (1.14 m)
▲ Dump Clearance, 45 Deg., Full Height . . . . . . .	9 ft. 7 in. (2.91 m)	9 ft. 9 in. (2.96 m)
▲▲▲ Overall Length, Bucket on Ground . . . . . . . . . .	24 ft. 1 in. (7.34 m)	23 ft. 10 in. (7.26 m)
Loader Clearance Circle, Bucket In Carry
Position . . . . . . . . . . . . . . . . . . . . . . . . . .	37 ft. 11 in. (11.56 m)	37 ft. 8 in. (11.48 m)
Operating Weight. . . . . . . . . . . . . . . . . . . . . . .	25,635 lb. (11 628 kg)	25,474 lb. (11 555 kg)

Loader operating information is based on machine with standard equipment; cab; rear cast bumper/counterweight; 20.5R25 tires; ROPS cab; 175-lb. (79 kg) operator; and full fuel tank. This information is affected by tire size, ballast, and different attachments.

High-Lift Z-Bar Information with Quick-Coupler and Hook-On Construction Fork

. . . . . . . . . . . . . . . . . . . . . . . . . . .▲ Tine Length	48 in. (1.22 m)	60 in. (1.52 m)
▲▲ Overall Length . . . . . . . . . . . . . . . . . . . . . . . . .	25 ft. 5 in. (7.75 m)	26 ft. 5 in. (8.05 m)
Tipping Load, Straight (fork level, load
centered24 in. [610 mm] forward
on tine). . . . . . . . . . . . . . . . . . . . . . . . . . .	12,238 lb. (5551 kg)	11,949 lb. (5420 kg)
Tipping Load, 40-Deg. Full Turn (fork
level, load centered 24 in. [610 mm]
forward on tine) . . . . . . . . . . . . . . . . . . . .	10,822 lb. (4909 kg)	10,533 lb. (4778 kg)
Operating Weight. . . . . . . . . . . . . . . . . . . . . . .	25,037 lb. (11 357 kg)	25,363 lb. (11 504 kg)

Standard Z-Bar Pin-On Bucket Selection Guide*

	5.00
	(3.8)
			N
		C	o
		C	r			M
		o	m			M
		o	m				a
		n		a			a
		s		a			x
	4.00	s			l		i
		e			L		m
		r			o		m
		v			o			u
	(3.0)		a			a		m
			a			d		m
			t			d
			i					L
			v					L
3)			e					o
3)				L				a
(m				L				d
					o
					a
					d
cu. yd.	3.00
SIZE	(2.3)
SIZE					Deere 2.5-cu.-yd. (1.9 m3)
BUCKET					Deere 2.5-cu.-yd. (1.9 m3)
					General-Purpose Bucket
	2.00
	(1.5)
	lb./cu. yd.		1,500					2,000	2,500	3,000	3,500
	kg/m3	600			900			1200	1500	1800	2100

MATERIAL (Loose weight)	lb./cu. yd.	kg/m3
Caliche	2,100	1250
Cinders	1,000	590
Clay and gravel, dry	2,400	1420
Clay and gravel, wet	2,600	1540
Clay,dry	2,500	1480
Clay,natural bed	2,800	1660
Clay,wet	2,800	1660
Coal, anthracite, broken	1,850	1100
Coal, bituminous, broken	1,400	830
Earth, dry, packed	2,550	1510
Earth, loam	2,100	1250
Earth, wet, excavated	2,700	1600
Granite, broken or large crushed	2,800	1660
Gravel, dry	2,550	1510
Gravel, dry 1/2" to 2" (13 to 50 mm)	2,850	1690
Gravel, pit run (graveled sand)	3,250	1930
Gravel, wet 1/2" to 2" (13 to 50 mm)	3,400	2020
Gypsum, crushed	2,700	1600
Limestone, broken or crushed	2,600	1540
Magnetite, iron ore	4,700	2790
Phosphate rock	2,160	1280
Pyrite, iron ore	4,350	2580
Sand and gravel, dry	2,900	1720
Sand and gravel, wet	3,400	2020
Sand, dry	2,400	1420
Sand, wet	3,100	1840
Sandstone, broken	2,550	1510
Shale	2,100	1250
Slag, broken	2,950	1750
Stone, crushed	2,700	1600
Topsoil	1,600	950

*This guide, representing bucket sizes not necessarily manufactured by Deere, will help you in selecting proper bucket size for material density, loader configuration, and operating conditions. Optimum bucket size is determined after adding or subtracting all tipping load changes due to optional equipment. The “conservative load” line on this guide is recommended when operating in conditions such as soft ground and unlevel surfaces. The “maximum

load” condition on this guide is sometimes utilized when operating on firm ground and level surfaces.

+ 13 hidden pages