ZyXEL P964 APR 964 Quick Installation Manual

P964 APR 964

Cable Router with 11g AP

Quick Installation Guide VER. 1.0

Rear Panel Connections

PORT CONNECTION

CABLE Connect the F-type connector to the CATV outlet using a

coaxial cable.

POWER Connect the external power adaptor to the P964 APR and

plug it into an appropriate power outlet.

TO a COMPUTER TO a HUB

LAN1~LAN4 Straight-through/Crossover

Ethernet cable

Straight-through/Crossover

Ethernet cable
WLAN IEEE 802.11g/b ­USB USB cable -

Before You Start

The P964 APR is a broadband cable CPE with dual modem/router operation mode. In
order to use your P964 APR, you need to establish an internet access account with your
local cable operator.

1. A cable Internet service that supports two-way cable modem access.

2. A coaxial cable line which has been prepared for cable modem service by your ISP

or cable operator.

3. The P964 APR’s Media Access Control (MAC) address is labeled on the bar code

sticker. The MAC address consists of 12 characters preceded by the text “HFC
MAC:”.

Use the HFC MAC address for registering with your cable operator.

4. The IP address(es) of the Domain Name System server(s) is supplied by your ISP.

5. The P964 APR is configured as a router with NAT and DHCP enabled and with
following factory default.

LAN IP Address 192.168.1.1
Subnet Mask 255.255.255.0
DHCP IP Pool 192.168.1.33 – 192.168.1.64
Web username webadmin
Web password 1234

Note: The default might be different from different cable operators. Please
consult with your cable Internet service provider for any change.