■
Support both VDSL2 and ADSL/2/2+
(Dual Mode: P-870HW-51B v2)
■
802.11g Wireless Connectivity
(802.11n)
■
TR-069 Remote Management
VDSL2 High Speed Wireless Gateway
Benefits
VDSL2 High Speed and High Performance for Triple Play
P-870HW-51A/B v2 provides up to 100/45 (DS/US) Mbps data rate. VDSL2 can provide
higher bandwidth, better efficiency and performance for service providers who plan to roll
out multi-services. P-870HW-51A/B v2 takes the advantages of the existing copper line to
provide much faster DSL connection for high end triple play, such as HDTV.
Dual Mode CPE with ADSL/2/2+ Fall Back (P-870HW-51B v2)
P-870HW-51B v2 can autosense the DSLAM settings and automatically switch to
ADSL/2/2+ mode acting as regular ADSL2+ CPE. Dual Mode feature ensures the service
provider can deploy one universal CPE to cover different loop ranges with VDSL2 or
ADSL/2/2+.
IEEE 802.11g wireless (802.11n)
P-870HW-51A/B v2 compliant with the 802.11b/g wireless standard which allows data
transmission speeds reach up to 54Mbps. Support up to 4 SSIDs and WPA/WPA2 for
security. WMM offers better QoS for multimedia streaming applications.
Advance QoS Features
P-870HW-51A/B v2 supports advance QoS features to guarantee the quality of triple play
services. The QoS features on P-870HW-51A/B v2 are deployed and field proven with
IPTV and VoIP applications to offer the excellent customer experience.
VDSL2 Wireless Gateway
p870hw-51a
/b v2
TR-069 Remote Management
P-870HW-51A/B v2 supports standard TR-069 remote management. It is field proven for
cutting down carrier’s support and operation cost. It also enhances the trouble-free
experience for customer and increase satisfaction.
Specifications
VDSL Compliance
• ITU.T G.993.1 VDSL1
• ITU.T G.993.2 VDSL2 ((Profile 8a, 8b, 8c, 8d,
12a, 12b and 17a support)
• Support VDSL band plan, Annex A, Annex B,
997, 998
• Support up to 100Mbps downstream and
45Mbps upstream
• SRA (Seamless Rate Adaption)
• UPBO (Upstream power back-off)
• VDSL OAM communication channels
• Dual latency support in VDSL mode
• INP value up to 16
• Trellis coding
• Broadcom PhyR PHY Level Retransmission
Technology
• PTM mode
• PPPoE (RFC2516)
ADSL Compliance
• G.992.1(G.dmt) Annex A, B compliant
• G.992.2(G.lite), Annex A compliant
• ANSI T1.413 compliant
• G.992.3(ADSL2) compliant, Annex A, B, L & M
• G.992.5(ADSL2+) compliant, Annex A, B, & M
• Dual latency
• I.432 ATM physical layer compliant
• Reach-Extended ADSL (RE ADSL),
• SRA (Seamless Rate Adaptation)
• ADSL physical connection ATM AAL5 (ATM
Adaptation Layer type 5)
• Support multi-protocol over AAL5
(RFC2684/1483)
• PPP over ATM AAL5 (RFC2364)
• PPPoE (RFC 2516)
• MAC Encapsulation Routing
• Support VC-based and LLC-based
multiplexing
• Support up to 8 PVCs
• ATM traffic shaping (CBR, VBR-rt/nrt, UBR )
• I.610 F4/F5 OAM
• Broadcom PhyR, PHY Level Retransmission
Technology
• Broadcom Nitro mode, ATM header compression
Wireless
• IEEE 802.11b/g Compliance (802.11n optional)
• Data Rates: 54Mbps and Auto fallback support
• Static and Dynamic WEP Key,(64/128 bit)
• MAC Address filter
• WPA/ WPA-PSK
• WPA2/WPA2-PSK
• Output power adjustable on GUI
• Auto Channel selection
• Multiple SSID up to 4
• WDS (Wireless Distribution System)
• Support WMM
• Multicast traffic pass-through
• WPS (Wireless Protected Setup)
Ethernet Switch
• IEEE 802.3 10BaseT Ethernet
• IEEE 802.3u 100BaseTx Ethernet
• Flow control in full duplex mode
• Back pressure in half duplex mode
Management
• Web
• CLI (Command Line Interpreter)
• SSH (Secure Shell function)
• Remote management for
Web/telnet/ftp/SNMP/DNS/ICMP
• Remote management for Web/telnet/ftp w/ SSH
• Access control for remote management
(LAN/WAN/WLAN)
• Configurable port number for remote management
• Firmware upgrade via Web/FTP/TFTP
• Text based configuration
• SNMP v1 & v2 with MIB II
• DSL Forum TR-069 (w/ HTTPS)
• DSL Forum TR-064
• DSL Forum TR-111
• Zyxel MAP configuration tool
• 802.1ag (Connectivity Fault Management)
Hardware Specifications
• WAN: one RJ11 interface for VDSL (over POTS)
• LAN: four 10/100 Auto MDI/MDI-X RJ-45 interface
• Wireless: one detachable 3dBi Antenna
• WLAN/WPS button: one real button for WLAN on-off
and WPS configuration
• Power Switch: one push type button
• Reset: one restore factory default button
• Status LEDs indicator
Power Requirement
• 12V DC 1000mA
• Power supply:120V/230V/240V
Physical Specifications
• Dimensions: 189 (W) x 132 (D) x 40 (H) mm
• Weight: 366g
Environmental Specifications
Operating Environment
• Temperature: 0°C ~ 40°C
• Humidity: 20%~85% RH(non-condensing)
Storage Environment
• Temperature: -20°C ~60°C
• Humidity: 20%~90% RH (non-condensing)
Certification
EMC
• EN55022 Class B
• EN61000-3-2: 2000
• EN61000-3-3: 1995+A1:2001
• FCC Part 15 (Class B)
Safety
• CSA 60950-1
• UL 60950-1
• EN 60950-1: 2001+A11
• IEC 60950-1: 2001
For more product information, visit us on the web www.US.ZyXEL.com
ZyXEL Nort h America
Tel: +1- 714-632 -0882 •
Copyright © 2008 ZyXEL Communications Corp. All rights reserved. ZyXEL, ZyXEL logo is a registered trademark of ZyXEL Communications Corp. All other
brands, product names, or trademarks mentioned are the property of their respective owners. All specifications are subject to change without notice.
Fax: +1- 714-632 -0858•Email: sales@zyxel.com •http://www.us.zyxel.com
264856 - 08192005