ZTE MF700 User Manual

MF700

HSPA+ TV Modem

User Guide

Introduction

Interface Type

USB 2.0 HIGH SPEED

Systems
supported

Supports most types of laptop and
desktop PC

Operating
systems
supported

Windows XP (SP2 or later), Vista,
Windows 7;
MAC 10.4.11 or later;
Fedora 12 or later, Ubuntu 9.10 or later

Functions

SMS service, data service, applications
management, TV, microSD card, etc.

Transmission
speed (Max)

5.76 Mbps UL

14.4 Mbps DL

Temperature

Storage: -40 ℃ ~ +80 ℃

Operation:-10 ℃ ~ +60 ℃

The product is a multi-mode 3G modem that works on GSM/GPRS/EDGE/
UMTS/HSPA networks. With a USB interface connecting to your laptop or
desktop computer, it supports data and SMS services through the mobile
USB Modem network as well as mobile TV, helping you realize mobile
communication and entertainment anytime and anywhere.

Specification

The following table shows the specification of your device.

microSD
capability

Support up to 32 GB microSD card

Notes: microSD is a trademark of SD Card Association.

Hardware Installation

Installing the SIM/USIM Card

1. Remove the back cover on the modem.

2. Hold your SIM/USIM card with the cut corner oriented as shown and then
slide it into the card holder with the metal contacts facing the modem.

3. Replace the back cover.

Installing the Memory Card

Only microSD card is supported by the modem and do not insert other
memory cards into the modem.

Insert the microSD card, orientated as shown, into the holder until you hear a
click.

Connecting the USB Modem to Your Computer

Remove the modem cap and plug the modem firmly into a USB port on your
computer.

Software Installation

On different operating systems, the software installation procedures may be
different. Please follow the general guide below and the system prompts
during installation.

• For Windows XP, Vista and Windows 7

When you connect the modem to your PC correctly, the system
automatically recognizes it as a CD-ROM and starts the software
installation wizard. If the system does not launch the installation wizard
automatically, please start it by running the executable file in the new
CD-ROM directory.

• For Mac OS

The system will automatically display a new CD-ROM icon on the desktop,
when you connect the modem to your Mac correctly. Double click the
installation software package in the CD-ROM, and follow the system
prompts to complete the software installation.

• For Linux