MC33XX Un-Powered Forklift Mount
Installation Guide
1.
Secure RAM Clamp Base to
Forklift Mounting Surface.
2.
Attach RAM Socket Arm to RAM
Clamp Base and Forklift Mount
Holder.
3.
Turn the Socket Arm hand-screw
clockwise until tight.
4.
Insert device in Forklift Mount
Holder in an upright position.
5.
Secure device with rubber strap
4
2
3
and snap into place.
1
2
RAM Clamp Base Forklift Mounting SurfaceRAM Socket ArmForklift Mount Holder
5
ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation,
registered in many jurisdictions worldwide. All other trademarks are the property of their
respective owners. ©2019 Zebra Technologies Corporation and/or its affiliates. All rights
reserved.
MN-003153-02 Rev. A - August 2019
Loading...