MC32N0 SERIES
QUICK START GUIDE
FEATURES
MC32N0-G
Indicator LED Bar
Scan Button
Keypad
Strap Lanyard
Display
Trigger
Stylus
Scan Indicator
Headphone Jack
Scan Button
MC32N0-S/R
Power
Microphone
MC32N0-S
Back View
Keypad
Indicator LED Bar
Scan Button
Speaker
Stylus
Display
MC32N0-R
Scan Button
Receiver
Back View
Scan Button
MC32N0-R
Rotate Turret
Speaker
Stylus
GETTING STARTED
Installing an Optional microSD Card Charge the MC32N0
1. Remove the SD card cover using
stylus.
2. Slide the SD card holder down to
unlock.
3. Lift the SD card holder.
4. Place the microSD card into the
contact area.
5. Close the SD card holder and slide
the SD card holder up to lock.
6. Replace the SD card cover and
ensure that it is installed properly.
3
4
Installing the Battery
1. On the MC32N0-R/S, loosen
the handstrap.
2. Align the top of the battery into
the battery compartment.
3. Rotate the bottom of the
bottom into the battery
compartment.
4. Press the battery down until
it snaps into place.
5. On the MC32N0-R/S, tighten
the handstrap.
Single Slot Cradle
1
5
Four Slot Cradle
24hr*
1. Install battery adapter into
spare battery slot.
2. Install battery into adapter.
Battery Release Button
Speaker
Headset Jack
Trigger
Speaker
Battery Release Button
Handstrap
Battery Release Button
Handstrap
2
6
It is recommended that this product be charged for 24 hours before the first use
*
to ensure that the internal battery is fully charged.
ERGONOMICSBATTERY REMOVAL DATA CAPTURE OPTIONS
Removing the Battery - MC32N0-R/S Removing the Battery - MC32N0-G
1. Power off the MC32N0.
2. Loosen the handstrap.
3. Push in the two Battery
Release buttons. The
battery ejects slightly.
4. Remove the battery
from the battery
compartment.
Zebra Technologies Corporation
Lincolnshire, IL U.S.A.
Zebra and the Zebra head graphic are registered trademarks of ZIH Corp. The
Symbol logo is a registered trademark of Symbol Technologies, Inc., a Zebra
Technologies company.
© 2014 Symbol Technologies, Inc.
1. Power off the
MC32N0-G.
2. Push in the two Battery
Release buttons. The
battery ejects slightly.
3. Remove the battery
from the battery
compartment.
MC32N0-G Scanning
MC32N0-S Scanning
MC32N0-R Scanning
Imager
Laser Scanner
Optimum Body Posture
for Low Scanning
Optimum Body Posture
for High Scanning
AVOID EXTREME
WRIST ANGLES
AVOID BENDING
AVOID REACHING
MN000215A02 Rev. A December 2014
Alternatete left and right hand
Taking breaks and task rotation recommended Alternate left and right knees
Loading...