Zebra Magnetic Stripe Reader Quick Reference Guide

Magnetic Strip e Reade r
Magnetic Stripe Reader
© 2001 SYMBOL TECHNOLOGIES, INC. All rights reserved. Symbol reserves the right to make changes to any product to improve reliability,
function, or design. Symbol does not assume any product liability arising out of, or in connection wi th, the
application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under
Symbol and the Symbol logo are registered trademarks of Symbol Technologies, Inc. Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are her eby acknowledged.
Symbol Technologies, Inc. One Symbol Plaza Holtsville, N.Y. 11742-1300
http://www.symbol.com
Patents
This product is covered by one or more of the following U.S. and foreign Patents: U.S. Patent No. 4,496,831; 4,593,186; 4,603,262; 4,607,156; 4,652,750; 4,673,805; 4,736,095; 4,758,717; 4,760,248; 4,806,742; 4,816,660; 4, 845,350; 4, 896,026; 4, 897,532; 4,923,281; 4,933,538; 4,992,717; 5,015,833; 5,017,765; 5, 021,641; 5, 029,183; 5, 047,617; 5,103,461; 5,113,445; 5,130,520; 5,140,144; 5,142,550; 5,149,950; 5,157,687; 5,168,148; 5,168,149; 5,180,904; 5,216,232; 5,229,591; 5,230,088; 5, 235,167; 5, 243,655; 5, 247,162; 5,250,791; 5,250,792; 5,260,553; 5,262,627; 5,262,628; 5, 266,787; 5, 278,398; 5, 280,162; 5,280,163; 5,280,164; 5,280,498; 5,304,786; 5,304,788; 5, 306,900; 5, 321,246; 5, 324,924; 5,337,361; 5,367,151; 5,373,148; 5,378,882; 5,396,053; 5, 396,055; 5, 399,846; 5, 408,081; 5,410,139; 5,410,140; 5,412,198; 5,418,812; 5,420,411; 5,436,440; 5,444,231; 5,449,891; 5,449,893; 5,468,949; 5,471,042; 5,478,998; 5,479,000; 5, 479,002; 5, 479,441; 5, 504,322; 5,519,577; 5,528,621; 5,532,469; 5,543,610; 5,545,889; 5, 552,592; 5, 557,093; 5, 578,810; 5,581,070; 5,589,679; 5,589,680; 5,608,202; 5,612,531; 5, 619,028; 5, 627,359; 5, 637,852; 5,664,229; 5,668,803; 5,675,139; 5,693,929; 5,698,835; 5, 705,800; 5, 714,746; 5, 723,851; 5,734,152; 5,734,153; 5,742,043; 5,745,794; 5,754,587; 5, 762,516; 5, 763,863; 5, 767,500; 5,789,728; 5,789,731; 5,808,287; 5,811,785; 5,811,787; 5,815,811; 5,821,519; 5,821,520; 5,823,812; 5,828,050; 5,850,078; 5,861,615; 5,874,720; 5, 875,415; 5, 900,617; 5, 902,989; 5,907,146; 5,912,450; 5,914,478; 5,917,173; 5,920,059; 5, 923,025; 5, 929,420; 5, 945,658; 5,945,659; 5,946,194; 5,959,285; 6,002,918; 6,021,947; 6, 036,098; 6, 047,892; 6, 050,491; 6,053,413; 6,056,200; 6,065,678; 6,067,297; 6,068,190; 6, 082,621; 6, 084,528; 6, 088,482; 6,092,725; 6,101,483; 6,102,293; 6,104,620; 6,114,712; 6,115,678; 6,119,944; 6,123,265; 6,131,814; 6,138,180; 6,142,379; 6,172,478; 6,176,428; 6, 178,426; 6, 186,400; 6, 188,681; 6,209,788; 6,216,951; 6,220,514; 6,243,447; 6,244,513; 6,247,647; 6,250,551; D305,885; D341,584; D344,501; D359,483; D362,453; D363,700; D363,918; D370,478; D383,124; D391,250; D405,077; D406,581; D414,171; D414,172; D418,500; D419,548; D423,468; D424,035; D430,158; D430,159; D431,562; D436,104. Invention No. 55,358; 62,539; 69,060; 69,187 (Taiwan); No. 1,601,796; 1,907,875; 1,955,269 (Japan); European Patent 367,299; 414,281; 367,300; 367,298; UK 2,072,832; France 81/03938; Italy 1,138,713. rev. 07/01
Quick Reference

Ergonomic Re commendations

Caution: In order to a void or minimize the potential ris k of ergonomic injury follow the
recommendations below. Consult with your local Health & Safety Manager to ensure that you are adhering to your company’s safety programs to prevent employee injury.
• Reduce or eliminate repetitive motion
• Maintain a natural position
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures.

Regulatory Information

Radio Frequency Interference Requirements

For a Class B Device:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against ha rmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If the equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one o r more of the following measures:
• Re-orient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC Part 15. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may c ause undesired operation.

Radio Frequency Interference Requirements - Canada

This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the following two conditions: (1) this dev ice may not cause harmful i nterference and (2) this device must accept any interference received, including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Power Supply

Note: Use only a Symbol-approved power supply 50-14001-004 output rated 12Vdc and
minimum 9A. The power supply is certified to EN60950 with SELV outputs.
1
Magnetic Stripe Reader
Hinweis: Benutzen Sie nur eine Symbol T echnologi es genehmigt Stromversorgung 50-
14001-004 in den Ausgabe: 12Vdc und minimum 9A. Die Stromversorgung ist bescheinigt nach EN60950 mit SELV Ausgaben.

CE Marking and European Union Compliance

Products intended for sale within the European Union are marked with the CE Mark which indicates compliance to applicable Directiv es and E uropean Norme s (EN), as follows. Amendments to these Directives or ENs are included:
Applicable Directives
Electromagnetic Compatibility Directive 89/336/EEC
Low Voltage Directive 73/23/EEC.
Applicable Standards
EN 55022:1998, Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment
EN 55024:1998; Information Technology Equi pment - Immu nity characteristics - Limits and methods of measurement
IEC 1000-4-2:1995; Electromagnetic compatibility (EMC); Part 4:Testing and measurement techniques; Section 4.2:Electrostatic discharge immunity test
IEC 1000-4-3:1997; El ectromagnetic Compatibility (EMC); Part 4:Testing and measurement techniques; Section 3. Radiated, radio frequency, electromagnetic field immunity test
IEC 1000-4-4:1995; Electromagnetic compatibility (EMC); Part 4: Testing and measurement techniques; Section 4:Testing electrical fast transient,/Burst immunity
IEC 1000-4-5:1995; Electromagnetic compatibility (EMC), Part 4: Testing and measurement techniques; Section 5: Surge Immunity
IEC 1000-4-6:1996; Electromagnetic compatibility (EMC), Part 4:Testing and measurement techniques; Section 6: Immunity to conducted disturbances, induced by radio frequency fields
IEC 1000-4-11:1994; Electromagnetic compatibility (EMC), Part 4: Testing and measurement techniques; Section 11: Voltage Dips, Short Interruptions, and Voltage Variations
EN 60950 + A1+A2+A3+A4+A11 - Safety of Information Technology Equipment Including Electrical Business Equipment
EN 60825 - Safety of Devices Containing Lasers.

RF Devices

Symbols RF products are designed to be compliant with the rules and regulations in the locations into which they are sold and will be labeled as required. The majority of Symbols RF devices are type approved and do not require the user to obtain license or authorization before using the equipment. Any changes or modifications to Symbol Technologies equipment not expressly approved by Symbol Technologies could void the users authority to operate the equipment.
The Spectrum24 equipment is intended for use throughout the European Economic Area, but its authorization for use in France is restricted as follows:
PAN European Frequency Range: 2.400 - 2.4835 GHz, identified by -EU suffix to the model number found on the product label
France - Restrict Frequency Range for use in France: 2.4465 - 2.4835 GHz, identified on [Product mmmm] by the -FR suffix to the model number found on the product label
2
Quick Reference
Belgium - Operation in an out of doors environment in Belgium must be restricted to 2.460 -
2.4835 GHz band
Italy - Operation in Italy requires a user license
Mexico - Restrict Frequency Range for use in Mexico: 2.450 - 2.4835 GHz
Chile - Restricted Power Output for use in Chile: 50 mW
Caution:
Remote and Standalone Antenna Configurations: FCC RF Exposure Guidelines
To comply with FCC RF exposure requirements, antennas that are mounted exter­nally at remote locations or operating near users at stand-alone desktop of similar configurations must operate with a mi nimum separati on distanc e of 20 cm from all persons.
3
Magnetic Stripe Reader
DECLARATION OF CONFORMITY
We, Symbol Technologies, Inc.
of One Symbol Plaza, Holtsville, NY 11742-1300, USA
declare under our sole responsibility that the product(s) Asterix III Magnetic Stripe Reader Spectr um24H R , LA4121, Type II R adio Car d
to which this declaration relates, is in co nformity wit h the following standards and/or other normat ive document s.
ETS 300 328 (November 1996) ETS 300 826 (November 1997) EN 60950: 1992 Incl Am dt 1-4, 11
We hereby declare that all essential radio test suites have been carried out and that the above named p r oduct(s) is in conformity with all the essential requirements of Directive 1999/5/EC.
The conformity assessment procedure referred to in Article 10(5) and detailed in Annex IV of Directive 1999/5/EC has been followed with the involvement of the following Notified Body(ies):
BABT, Claremont House, 34 Molesey Road, Walton-on-Th ames, KT12 4RQ
Identification mark: 0168 The equipment will also carry the Clas s
The techn ical documentation relevant to the above equ ipment can be made available for inspec t ion on application to:
Symbol Technologies EMEA, Symbol Place, Winnersh Triangle, Berkshire, RG 41 5TP, UK
Dornu Narnor
(name)
Director, Regulatory and Technic al Sal es (title)
(signature of authorised person) (date)
2 equipment identifier
3, May 2000
4
Quick Reference
Warranty
Symbol Technologies, Inc. (“Symbol”) manufactures its hardware products in accordance with industry-standard practices. Symbol warrants that for a period of twelve (12) months from date of shipment, products will be free from defects in materials and workmanship. This warranty is provid ed to the original owne r only and is not transferable to an y third party. It shall not apply to any product (i) which has been repaired or altered unless done or approved by Symbol, (ii) which has not been maintained in accordance with any operating or handling instructions supplied by Symbol, (iii) which has been subjected to unusual phys ical or electrical stress, misuse, abuse, power shortage, negligence or accident or (iv) which has been used other than in accordance with the product operating and handling instructions. Preventive maintenance is the responsibility of customer and is not covered under this warranty.
Wear items and accessories having a Symbol serial number will carry a 90-day limited warranty. Non-serialized items will carry a 30-day limited warranty.
Warranty Coverage and Procedure
During the warranty period, Symbol will repair or replace defective products returned to Symbol’s manufacturing plant in the US. For warranty service in North America, call the Symbol Support Center at 1-800-653-5350. International customers should contact the local Symbol office or support center. If warranty service is required, Symbol will issue a Return Material Authorization Number. Products must be shipped in the original or comparable packaging, shipping and insurance charges prepaid. Symbol will ship the repaired or replacement product freight and insurance prepaid in North America . Shipments from the US or other loca tions will be made F.O.B. Symbols manufacturing plant.
Symbol will use new or refurbished parts at its discretion and will own all parts removed from repaired products. Customer will pay for the replacement product in case it does not return the replaced product to Symbol within 3 days of receipt of the replacement product. The process for return and customers charges will be in accordance with Symbols Exchange Policy in effect at the time of the exchange. Customer accepts full responsibility for its software and data including the appropriate backup thereof. Repair or replacement of a product during warranty will not extend the original warranty term.
Symbols Customer Service organization offers an array of service plans, such as on-site, depot, or phone support, that can be implemented to meet c u stomers special operational requirements and are available at a substantial discount during warranty period.
General
Except for the warranties stated above, Symbol disclaims all warranties, express or implied, on products furnished hereunder , including without limitation implied warranties of merchantability and fitness for a particular purpose. The stated express warranties are in lieu of all obligations or liabilities on part of Symbol for damages, including without limitation, special, indirect, or consequential damages arising out of or in connection with the use or performance of the product. Sellers liability for damages to buyer or others resulting from the use of any product, shall in no way exceed the purchase price of said product, except in instances of injury to persons or property. Some states (or jurisdictions) do not allow the exclusion or limitation of incidental or consequential damages, so the preceding exclusion or limitation may not apply to you.
5
Service Information
Before you use the unit, it must be configured to operate in your facilitys networ k and run your applications.
If you have a problem running your unit or using your equipment, contact your facilitys T echnical or Systems Support. If there is a problem with the equipment, they will contact the Symbol Support Center:
United States
United Kingdom 0800 328 2424 Asia/Pacific 337-6588 Australia 1-800-672-906 Austria/Österreich 1-505-5794 Denmark/Danmark 7020-1718 Finland/Suomi 9 5407 580 France 01-40-96-52-21 Germany/Deutchland 6074-49020 Italy/Italia 2-484441 Mexico/México 5-520-1835 Netherlands/Nederland 315-271700 Norway/Norge 66810600 South Africa 11-4405668 Spain/España +913244000 Sweden/Sverige 84452900 Latin America
Sales Support Europe/Mid-East
Distributor Operations
1
Customer support is available 24 hours a day, 7 days a week.
For the la t es t ve rsion of thi s guide g o to:http://www.symbol.com/manuals.
1
1-800-653-5350 1-631-738-2400
1-800-347-0178 Inside US +1-561-483-1275 Outside US
Contact local distributor or call +44 208 945 7360
Canada 905-629-7226
Revision A - September 2001
72-53264-01
Symbol Technologies, Inc. One Symbol Plaza Holtsville, NY 11742-1300
Loading...