72-150221-04 Revision A - March 2017
FLB3578 CRADLE With FIPS
QUICK REFERENCE GUIDE
• Improve work procedures.
ሶቑ孔函ቒᇬ㍔⫀⑵䚕孔函䷘榊㽱椫⹂呹尞Ⓟ◣巿↩᧤ᨒ᧿᧿ᨅ᧥ቑ⪉䄥⪉ቈሲኌኖB
⫀㔏嫢孔函ቊሼᇭሶቑ孔函ቒᇬ⹅ㄼ䜿⬒ቊ∎䞷ሼቮሶቋት䥽䤓ቋሺሧቡሼሯᇬሶቑ孔函ሯ
ንኇቧኣዉኰንዄዐ♦≰㳮扠㘴ሺ∎䞷ሸቯቮቋᇬ♦≰椫⹂ትㆤሰ怆ሶሼሶቋሯሥቭቡ
ሼᇭ ♥㔀崻㢝㦇㈢ቆ㷲ሺሧ♥ቭ㔀ሧትሺₚሸሧᇭ
鲮뼩 ꓩꟹ鱉 끩끞 닆 놹볁뿱겕 閵鱚ꫦ넩 넽넁
鲮뼩 ꓩꟹ 鱉놹볁뿱 겕 閵鱚ꫦ넩 넽냱ꕵꈑ 넭ꐺ껽놹隱 隵ꇝ鷑 ꟹ걙鱉 뼕 ꯍ 꽻걪鱽鲙
• Provide a suitable working environment
• Provide adequate clearance
• Provide adjustable workstations
• Reduce or eliminate direct pressure
may be hazardous.
C. min. Use of alternative power supply will invalidate any approvals given to this unit and
40
o
electrical ratings: Output 9-15 VDC, min 1.5A, with a maximum ambient temperature of
Use ONLY a Zebra approved UL LISTED ITE (IEC/EN 60950-1, LPS/SELV) power supply with
Power Supply
Operation of the device without regulatory approval is illegal.
.
1
CAUTION
Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Note1: For 2.4GHz or 5GHz Products: Europe includes, Austria, Belgium, Bulgaria, Czech Republic,
is available at: http://www.zebra.com/doc.
Please refer to the Declaration of Conformity (DoC) for details of other country markings. This
Korea, Australia, and Europe
are approved for use in the following countries: United States, Canada, Japan, China, S.
Regulatory markings, subject to certification, are applied to the device signifying the radio(s) is/
Wireless Device Country Approvals
please visit https://www.bluetooth.org/tpg/listings.cfm.
This is an approved Bluetooth product. For more information or to view End Product Listing,
Wireless Technology
®
C.
o
Declared maximum operating temperature: 50
before connecting to an external power source.
Do NOT attempt to charge damp/wet batteries. All components must be dry
battery chargers.
Only use Zebra approved and UL Listed accessories, battery packs and
Bluetooth
CAUTION
void the user's authority to operate the equipment.
Any changes or modifications to Zebra equipment, not expressly approved by Zebra, could
http://www.zebra.com/support.
Local language translations are available at the following website:
sold and will be labeled as required.
All Zebra devices are designed to be compliant with rules and regulations in locations they are
This guide applies to Model Number FLB3578 with FIPS.
Regulatory Information
• Reduce or eliminate vibration
• Perform tasks at correct heights
• Keep objects that are used frequently within easy reach
• Reduce or eliminate excessive force
• Maintain a natural position
• Reduce or eliminate repetitive motion
are adhering to your company’s safety programs to prevent employee injury.
recommendations below. Consult with your local Health & Safety Manager to ensure that you
Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the
Ergonomic Recommendations
Health and Safety Recommendations
trademarks are the property of their respective owners.
a registered trademark of Symbol Technologies, Inc., a Zebra Technologies company. All other
Zebra and the Zebra head graphic are registered trademarks of ZIH Corp. The Symbol logo is
subsystems contained in Zebra products.
Zebra intellectual property rights. An implied license only exists for equipment, circuits, and
No license is granted, either expressly or by implication, estoppel, or otherwise under any
or use of any product, circuit, or application described herein.
Zebra does not assume any product liability arising out of, or in connection with, the application
function, or design.
Zebra reserves the right to make changes to any software or product to improve reliability,
portion thereof.
disassemble, decode, or reverse engineer any licensed program delivered to the user or any
same on any authorized copies it makes, in whole or in part. The user agrees not to decompile,
Zebra’s copyright notice on the licensed programs delivered hereunder, and to include the
program in a network without written permission from Zebra. The user agrees to maintain
other program material, create a derivative work from a licensed program, or use a licensed
user shall not modify, merge, or incorporate any form or portion of a licensed program with
licensed program in whole or in part is granted, except as permitted under copyright law. The
otherwise transferred by the user without prior written consent of Zebra. No right to copy a
program). Except as noted below, such license may not be assigned, sublicensed, or
exclusive license to use each software or firmware program delivered hereunder (licensed
to the user is on a licensed basis. Zebra grants to the user a non-transferable and nonThe software is provided strictly on an “as is” basis. All software, including firmware, furnished
systems. The material in this manual is subject to change without notice.
mechanical means, such as photocopying, recording, or information storage and retrieval
mechanical means, without permission in writing from Zebra. This includes electronic or
No part of this publication may be reproduced or used in any form, or by any electrical or
reserved.
©2017 Symbol Technologies LLC, a subsidiary of Zebra Technologies Corporation. All rights
worldwide. All other trademarks are the property of their respective owners.
Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many jurisdictions
http://www.zebra.com
Lincolnshire, IL U.S.A.
Zebra Technologies Corporation
http://www.zebra.com for the most updated warranty terms.
please call Zebra Technologies Corporation at +65 6858 0722. You may also visit our website:
and remedies you may have under the Australian Consumer Law. If you have any queries,
Zebra Technologies Corporation Australia's limited warranty above is in addition to any rights
and the failure does not amount to a major failure.
also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality
major failure and compensation for any other reasonably foreseeable loss or damage. You are
excluded under the Australia Consumer Law. You are entitled to a replacement or refund for a
02/03, Singapore 068895, Singapore. Our goods come with guarantees that cannot be
This warranty is given by Zebra Technologies Asia Pacific Pte. Ltd., 71 Robinson Road, #05-
For Australia Only
http://www.zebra.com/warranty.
For the complete Zebra hardware product warranty statement, go to:
Warranty
For the latest version of this guide go to: http://www.zebra.com/support.
www.zebra.com/support.
Support. If there is a problem with the equipment, they will contact Zebra Support at:
If you have a problem using the equipment, contact your facility’s Technical or Systems
Service Information
FCC RF Exposure Guidelines
Reducing RF Influence – Use Properly
Only operate the device in accordance with the instructions supplied. The device complies with
internationally recognized standards covering human exposure to electromagnetic fields from radio
devices. For information on “International” human exposure to electromagnetic fields refer to the Zebra
Declaration of Conformity (DoC) at http://www.zebra.com/doc.
Europe
To satisfy EU RF exposure requirements, a mobile transmitting device must operate with a minimum
separation distance of 20 cm or more from a person's body.
Canada
Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux
rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et
utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. To
satisfy FCC RF exposure requirements, a mobile transmitting device must operate with a minimum
separation distance of 20 cm or more from a person's body.
instructions, may cause harmful interference to radio communications. However there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment in an outlet on a circuit different from the receiver is connection
• Consult the dealer or an experienced radio/TV technician for help
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Radio Frequency Interference Requirements-Canada
This device Class B digital apparatus complies with Canadian ICES-003 and with
with RSS 210 of Industry & Science Canada. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference and (2) this device must accept any interference
received, including interference that may cause undesired operation.Label Marking: The Term "IC:"
before the radio certification only signifies that Industry Canada technical specifications were met.
Radio Frequency Interference Requirements-Brazil
Declarações Regulamentares para STB3578 BRAZILNOTA: A marca de certificação se aplica ao
Equip. de Radiação Restrita, modelo STB3578. Este equipamento opera em caráter secundário, isto
é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não
pode causar interferência a sistemas operando em caráter primário."
Para maiores consultas sobre ANATEL consulte o site: www.anatel.gov.br.
Chile
Este equipo cumple con la Resolución No 403 de 2008, de la Subsecretaria de telecomunicaciones,
relativa a radiaciones electromagnéticas.
Radio Frequency Interference Requirements-FCC
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
Marking and European Economic Area (EEA)
Statement of Compliance
Zebra hereby declares that this radio equipment is in compliance with Directive 2011/65/EU and 1999/5/
EC or 2014/53/EU (2014/53/EU supersedes 1999/5/EC from 13th June 2017). The full text of the EU
Declaration of Conformity is available at the following internet address: http://www.zebra.com/doc.
Japan (VCCI) - Voluntary Control Council for Interference
Class B ITE
Korean Warning Statement for Class B ITE
기 종 별
B급 기기
( 가정용 방송통신기기 )
이 기기는 가정용 (B 급 ) 으로 전자파적합등록을
한 기기로서 주로 가정에서 사용하는 것을 목적
으로 하며 , 모든 지역에서 사용할 수 있습니다 .
China
⚗ 㫋 幐
Eurasian Customs Union
Евразийский Таможен ны й Союз
Данный продукт соответствует требованиям знака EAC.
Mexico
Restrict Frequency Range to: 2.450 - 2.4835 GHz.
S. Korea
Taiwan
사 용 자 안 내 문
Ukraine
Warnings for Use of Wireless Devices
You are reminded of the need to observe restrictions on the use of radio devices in fuel
depots, chemical plants, etc. and areas where the air contains chemicals or particles (such
as grain, dust, or metal powders).
Safety in Aircraft
Switch off your wireless device whenever you are instructed to do so by airport or airline staff. If your
device offers a ‘flight mode’ or similar feature, consult airline staff as to its use in flight.
Safety in Hospitals
Wireless devices transmit radio frequency energy and may affect medical electrical equipment.
Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or
healthcare facilities. These requests are designed to prevent possible interference with sensitive
medical equipment.
Pacemakers
Pacemaker manufacturers recommended that a minimum of 15 cm (6 inches) be maintained between
a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker.
These recommendations are consistent with independent research and recommendations by Wireless
Technology Research.
Persons with Pacemakers:
• ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when turned ON.
• Should not carry the device in a breast pocket.
• Should use the ear furthest from the pacemaker to minimise the potential for interference.
• If you have any reason to suspect that interference is taking place, turn OFF your device.
Other Medical Devices
Please consult your physician or the manufacturer of the medical device, to determine if the operation
of your wireless product may interfere with the medical device.
Waste Electrical and Electronic Equipment (WEEE)
Bulgarish: За клиенти от ЕС: След края на полезния им живот всички продукти трябва да се
връщат на Zebra за рециклиране. За информация относно връщането на продукти, моля отидете
на адрес:http://www.zebra.com/weee.
Čeština: Pro zákazníky z EU: Všechny produkty je nutné po skonèení jejich životnosti vrátit spoleènosti
Zebra k recyklaci. Informace o zpùsobu vrácení produktu najdete na webové stránce:
http://www.zebra.com/weee.
Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, når de er udtjent. Læs
oplysningerne om returnering af produkter på: http://www.zebra.com/weee.
Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer Lebensdauer zum
Recycling an Zebra zurückgesandt werden. Informationen zur Rücksendung von Produkten finden Sie
unter http://www.zebra.com/weee.
Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο τέλος της διάρκειας ζωής τους, πρέπει να
επιστρέφονται στην Zebra για ανακύκλωση. Για περισσότερες πληροφορίες σχετικά με την επιστροφή
ενός προϊόντος, επισκεφθείτε τη διεύθυνση http://www.zebra.com/weee στο ∆ιαδίκτυο.
Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada taaskasutamise eesmärgil
Zebra'ile. Lisainformatsiooni saamiseks toote tagastamise kohta külastage palun aadressi:
http://www.zebra.com/weee.
English: For EU Customers: All products at the end of their life must be returned to Zebra for recycling.
For information on how to return product, please go to: http://www.zebra.com/weee.
Español: Para clientes en la Unión Europea: todos los productos deberán entregarse a Zebra al final
de su ciclo de vida para que sean reciclados. Si desea más información sobre cómo devolver un
producto, visite: http://www.zebra.com/weee.
Français: Clients de l'Union Européenne : Tous les produits en fin de cycle de vie doivent être
retournés à Zebra pour recyclage. Pour de plus amples informations sur le retour de produits,
consultez : http://www.zebra.com/weee.
Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono
essere restituiti a Zebra al fine di consentirne il riciclaggio. Per informazioni sulle modalità di
restituzione, visitare il seguente sito Web: http://www.zebra.com/weee.
Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža beigām ir jānogādā atpakaļ Zebra
otrreizējai pārstrādei. Lai iegūtu informāciju par produktu nogādāšanu Zebra, lūdzu, skatiet:
http://www.zebra.com/weee.
Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų eksploatacijos laikui, turi būti grąžinti utilizuoti į
kompaniją „Zebra“. Daugiau informacijos, kaip grąžinti gaminį, rasite:
http://www.zebra.com/weee.
Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Zebra vállalathoz kell eljuttatni
újrahasznosítás céljából. A termék visszajuttatásának módjával kapcsolatos tudnivalókért látogasson
el a http://www.zebra.com/weee weboldalra.
Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar tal-ħajja ta' l-użu tagħhom, iridu jiġu
rritornati għand Zebra għar-riċiklaġġ. Għal aktar tagħrif dwar kif għandek tirritorna l-prodott, jekk
jogħġbok żur: http://www.zebra.com/weee.
Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar
Zebra te worden teruggezonden voor recycling. Raadpleeg
http://www.zebra.com/weee voor meer informatie over het terugzenden van producten.
Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji nale¿y zwróciæ do firmy
Zebra w celu ich utylizacji. Informacje na temat zwrotu produktów znajduj¹ siê na stronie internetowej
http://www.zebra.com/weee.
Português:
Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos à Zebra para reciclagem.
Para obter informações sobre como devolver o produto, visite: http://www.zebra.com/weee.
Românesc: Pentru clienţii din UE: Toate produsele, la sfârşitul duratei lor de funcţionare, trebuie
returnate la Zebra pentru reciclare. Pentru informaţii despre returnarea produsului, accesaţi:
http://www.zebra.com/weee.
Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe vrniti podjetju Zebra za
reciklažo. Za informacije o vračilu izdelka obiščite: http://www.zebra.com/weee.
Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky musia byť po uplynutí doby ich životnosti
vrátené spoločnosti Zebra na recykláciu. Bližšie informácie o vrátení výrobkov nájdete na:
http://www.zebra.com/weee.
Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrätettäväksi Zebrayhtiöön, kun tuotetta ei enää käytetä. Lisätietoja tuotteen palauttamisesta on osoitteessa
http://www.zebra.com/weee.
Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd måste returneras till Zebra för
återvinning. Information om hur du returnerar produkten finns på
http://www.zebra.com/weee.
Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri dönüştürme için Zebra'ya iade
edilmelidir. Ürünlerin nasıl iade edileceği hakkında bilgi için lütfen şu adresi ziyaret edin:
http://www.zebra.com/weee.
Introduction
Mounting
Screw Hole
(2)
Charging/
Communication
Contacts
Latch
Pairing
Bar Code
Rubber
Foot
Rubber
Foot
Rubber Feet (2)
Mounting
Screw Hole
Power Cable
Groove
Mounting
Screw Hole
Cable
Hook
Power Port
Host Port
Host Cable
Groove
Mounting
Screw Hole
Converter
Knob
Latch
Back
Front
LED
Host
Por
t
Power Port
Converter Knob:
Horizontal Position
Converter
Knob
Verti cal
Position
Unless otherwise specified,
dimension tolerance = ± 0.01 inch (± 0.25 mm)
3.20"
[81.28mm]
1.60 "
[40.64mm]
9.27"
[235.58mm]
Total Bracket Height
10.90"
[276.86mm]
Top of Cradle
The FLB3578 with FIPS cordless scanner cradle acts as charger and radio
communication interface for the DS3578 cordless scanner. It attaches to a mounting
bracket using three isolators. The bracket is then mounted on the forklift surface.
The FLB3578 with FIPS cradle receives data from the scanner via a Bluetooth radio,
and sends that data to the host through an attached cable. The cradle also charges the
scanner’s internal battery pack when the scanner is inserted. A portable power supply
on the forklift supplies power to the cradle.
This document provides basic instructions on setting up and using the cradle. Any
discussion of transmission of information refers specifically to the FLB3578 cradle.
The FLB3578 cradles can be used with the LS3578 scanners for charging and radio
communication.
CAUTION
FLB3508/3578 cradles. LS3578 and DS3578 cordless scanners are
incompatible with FLB3408/3478 cradles.
LS3478 and DS3478 cordless scanners are incompatible with
Equipment Supplied
The cradle package includes:
•Cradle
• Mounting bracket with isolators
• Three 8-32 x 1.5" Philips head screws (for attaching cradle to mounting bracket).
Accessories
The following equipment may be needed:
• Four 1/4-20 screws, minimum length 1.0" (for fastening bracket to mounting
surface).
Save the shipping container for storing or shipping. Inspect all equipment for damage. If
anything is damaged or missing, call an authorized Zebra Technologies Support Center
immediately.
Related Documentation
LS3578 Product Reference Guide, p/n 72E-93911-xx.
LS3578 Quick Start Guide, p/n 72-93587-xx.
DS3578 Product Reference Guide, p/n 72E-110462-xx.
DS3578 Quick Start Guide, p/n 72-151247-xx.
STB3508/3578 Quick Reference Guide, p/n 72-150220-xx.
This documentation is available at: http://www.zebra.com/support.
Cradle Connections
IMPORTANT
1. Insert the interface cable into the cradle’s
host port.
2. Connect the forklift power supply to the
cradle’s power port, if applicable.
3. Optional: Thread the host cable over the
cable hook and run the host and power
cables into their respective cable grooves,
or use cable ties to secure them to the
mounting plate after it is attached to the
cradle (see Mounting the Cradle).
4. Pair the scanner with the cradle by
scanning the pairing bar code on the
cradle.
5. If necessary, scan the appropriate host bar
code (for non-autodetected interfaces).
Refer to the Product Reference Guide.
Changing the Host Interface
To connect to a different host, or to the same
host through a different cable:
1. Unplug the power supply from the cradle, if
used.
2. Unplug the interface cable from the host.
3. Connect the interface cable to the new
host, or the new interface cable to the
existing host.
4. Reconnect the power supply, if required.
5. If necessary, scan the appropriate host bar
code (for non-autodetected interfaces). Refer to the Product Reference Guide.
Using a Host Interface to Supply Power
Some hosts can provide power to the cradle via the host interface, instead of an external
power supply
CAUTION
Connect the interface cable and power supply (if necessary) in
the following order to ensure proper operation of the scanner
and cradle.
.
If the scanner does not recognize the host, disconnect the power
supply, then reconnect after connecting the host cable
.
Sending Data to the Host Computer
The cradle receives data from the scanner via a wireless radio connection and transmits it
to the host computer via the host cable. The scanner and cradle must be paired for
successful wireless communication.
Pairing
Pairing registers a scanner to the cradle such that the scanner and cradle can exchange
information. The FLB3578 operates in two modes: Point-to-Point (scanner-to-cradle) and
Multipoint-to-Point (multi scanner-to-cradle). In Point-to-Point mode, the scanner is paired
to the cradle either by insertion into the cradle (if pairing on insertion is enabled), or by
scanning the pairing bar code. In Multipoint-to-Point mode, up to three scanners can be
paired to one cradle when using a Non-FIPS digital scanner and cradle. When using a
FIPS enabled digital scanner and a FIPS enabled cradle, up to seven digital scanners can
be paired to one cradle. The multipoint bar code must be scanned to activate this feature.
Refer to the Product Reference Guide for more information.
The cradle includes pairing bar codes on both its front and back. To pair the scanner with
the cradle, scan a pairing bar code. A high-low-high-low beep sequence followed by a lowhigh beep sequence indicates successful pairing and connection to the remote device. A
long low, long high beep sequence indicates unsuccessful pairing. Refer to the Product
Reference Guide for more information.
Lost Connection to Host
If scanned data does not transmit to the cradle’s host, ensure that all cables are firmly
inserted and the power supply is connected to an appropriate AC outlet, if applicable. If
scanned data still does not transmit to the host, reestablish a connection with the host:
1. Disconnect the power supply from the cradle.
2. Disconnect the host interface cable from the cradle.
3. Wait three seconds.
4. Reconnect the host interface cable to the cradle.
5. Reconnect the power supply to the cradle, if required.
6. Reestablish pairing with the cradle by scanning the pairing bar code.
NOTE
The FLB3578 does not always require a power supply, depending on the
host interface.
Charging the Scanner Battery in the Cradle
To charge the scanner battery, place the scanner in the cradle. The battery begins charging
when the scanner LED indicator starts flashing green. A complete charge of a fully
discharged battery can take up to 4.5 hours using external power and up to 10 hours using
the interface cable.
Mounting Template
Cradle Parts
Mounting the Cradle
Horizontal Mount
1. Ensure the desk/wall mount
converter knob is in the correct
position, shown at right.
2. If mounting the cradle horizontally
where no fastening is necessary,
peel the protective paper from the
back of the rubber feet included
with the cradle packaging, and
attach the feet to the cradle at the
indentations in the plastic. These
feet provide traction and prevent
surface damage
.
Vertical Mount
NOTE
Do not use the rubber feet when mounting in a vertical orientation.
To mount the cradle on a vertical surface:
1. Use a Philips screwdriver to turn the desk/wall mount converter knob to the position
shown below. The front latches protract to engage the depressions at the base of the
scanner’s handle.
2. Attach the interface and power
cables to the appropriate ports
(see Cradle Connections).
3. Press the cables into the cable
grooves.
4. Position the cradle on the
mounting surface, or use the
template included in this guide.
5. Mark the surface through the
three holes on the bottom of the
cradle, or use the mounting
template to determine the location
of the screw holes.
6. Pre-drill holes to accommodate three 1.5" #8 Philips head screws.
7. Attach the cradle securely to the surface.
8. Place the scanner in the cradle.
CAUTION
Do not pour, spray, or spill any liquid on the cradle.
Scanner LED Indicators
The green LED on the scanner indicates charging activity (see the table below). If the
scanner is charging in fast mode (non-bus powered mode), the green LED blinks at a fast
rate. If the scanner is charging in slow mode (bus-powered mode), the LED blinks at a slow
rate.
If the red LED on the scanner begins flashing, indicating a charging problem, remove the
scanner from the cradle and replace the battery. If the red LED on the scanner continues
flashing, contact the Zebra Technologies Support Center.
Standard Scanner Use LED Sequences
Off No power applied to scanner (battery is discharged or removed); scanner is in low
Green A bar code was successfully decoded.
Red A data transmission error; scanner malfunction; or, LS3578 cordless scanner was
power and ready to scan.
inserted into an STB3478 cradle.
Charging Use LED Sequences
Green Slow Flash The scanner charges at the slow rate (used when the cradle is
Green Fast Flash The scanner charges at the fast rate (used when cradle is powered
Red Flash Charging problem. Refer to the Product Reference Guide for more
Red and Green Flash Temperature fault.
powered by the host cable).
from an external power supply).
information.
Troubleshooting
If the cradle does not work after following the previous procedures:
• Check the system power.
• Check for loose cable connections.
• Check that the scanner is inserted properly in the cradle.
• Check that the host settings are correct and the cradle is connected to the appropriate
port on the host.
Loading...