ZALMAN CNPS5X PERFORMA User Manual
User’s Manual
CNPS5X PERFORMA
AMD Socket FM2/FM1/AM3+/AM3 / AM2+ / AM2 CPU&APUs
Intel Socket 1155 / 1156 / 775 CPUs
To ensure safe and easy installation,
please read the following precautions
www.ZALMAN.com
Ver.121113
1. Precautions
1) Avoidinsertingobjects orhandsintothefanwhileit isinoperation
topreventproductdamageandinjuries.
2) Do not ingest the Thermal Grease, and avoid its contact with skin and
eyes. If contact is made with skin, wash off with water. If ingested or
irritation persists, seek medical attention.
3) To prevent possible injuries, gloves must be worn while handling this
product.
4) Excessive force exerted on the fan may cause damage to the fan and/
or system.
5) Use and keep product away from reach of children.
6) Check the components list and condition of the product before
installation. If any problem is found, contact the retailer to obtain a
replacement.
7) During transportation of the system, the cooler must be removed.
Zalman is not responsible for any damages that occur during the
transport of a system.
8) Product design and specifications may be revised to improve quality
and performance.
10) Enable PWM function in BIOS settings after installation.
Disclaimer) Zalman Tech Co., Ltd. is not responsible for any damages due
to external causes, including but not limited to, improper use,
problems with electrical power, accident, neglect, alteration,
repair, improper installation, or improper testing.
2. Specifications
Spec.
Material Pure Copper and Aluminum
Weight 320g
Dimensions 127(L) Ⅹ 64(W) Ⅹ 134(H)㎜
Fan
Model
Bearing-Type FSB(Fluid Shield Bearing)
RPM 1,400 ~ 2,800rpm ± 10%
Noise Level 20 ~ 32dBA ± 15%
Input Voltage 12V
Function PWM Control, Auto Restart
CNPS 5X PERFORMA
.COM
1
3. Components
BackplateCooler
Thermal Grease
User’s Manual Thermal Grease
4. Installation Requirements
1) Space Requirements
The cooler’s installation requires an unobstructed space of 130㎜(width),
65㎜(length), and 135㎜(height), with the CPU as a central reference
point. Please check if components such as ODDs and PSU protrude into
the required space.
2) Air Guide Removal
Air guides on enclosures must be removed before the cooler’s
installation since they protrude into the cooler’s required space.
65㎜
135㎜
.COM
130㎜
2
Loading...