Yorkville NX55P User Manual

Features:
Integrated 550 Watt AmplifierBi-amplified Power Module12-inch Neodymium Woofer
1-inch Neodymium Compression Driver
1.4-inch Aluminum Diaphragm Horn Driver (1-inch Exit)
Designed as Front-of-house or Monitor Loudspeaker
80° x 50° Custom Waveguide Horn
Rugged Lightweight Molded Composite Cabinet Construction
All-Metal Grille, Integrated Flypoints, Handles & Stand Mount
125 dB Maximum SPL
Overview:
NX55P
NX55P
12-inch Powered Loudspeaker Cabinet
The NX55P active speaker enclosure uses a combination of amplifier technologies to create the best combination of lightweight enclosure and high quality sound. The combination of neodymium woofer magnetics, lightweight Polypropylene construction and high tech amplifier technology create a loudspeaker that has remarkable performance in a lightweight package.
The 550-watt bi-amplified NX55P uses a two-tier class H linear technology for high frequencies, allowing the horn to produce loud clean transients to keep up with the high output of the woofer. The two-tier amplifier technology is a lower weight, more efficient amplifier with higher headroom and lower operating temperature, and a perfect solution for powering the top end. The woofer or low frequency amplifier uses Class D switching technology to reduce overall weight of the amplifier section, and deliver maximum power to the 12-inch neodymium woofer.
The NX55P can easily be used in any orientation, and close to walls, floors and in close arrays with multiple cabinets. Particular care was taken designing the components to reduce extraneous heat production.
The NX55P has a versatile direct input system and built-in mixer. The mixer allows the loudspeaker to be used directly with a microphone and / or line source. The loop output allows additional active cabinets to be driven from one cabinet’s mixer stage, or a series of cabinets to be driven from one source. The NX55P has user defeatable 100Hz high pass filters that allow either cabinet to be used more efficiently with any Yorkville active subwoofer
.
Integrated bar handles, 1/4-20 flypoints and integrated stand mount adaptor, as well as 1/4-inch TRS and XLR inputs ensure the NX55P can be easily integrated into any live or DJ PA set up.
Optional NX Flying Hardware
The NXF flyware is a unique and versatile U-bracket system that attaches to the integrated flypoints on NX cabinets for a safe and secure installation. Once mounted, the cabinets can be flown at almost any angle with a standard shackle and cable system. In addition, the cabinet can be angled up to 30 degrees left or right across the horizontal plane within the NXF U-bracket. Flying an array of NX cabinets with ideal spacing between boxes is possible by joining multiple NXF U-Brackets and their mounted cabinets together with a simple arraying adaptor.
NXF35U - Steel U-Bracket flying assembly NXF35W - Wall Mounting Bracket (to attach NXF35U assembly to wall or pillar) NXF35A -
Array Link
Assembly (to properly array NXF350U flying assemblies - sold in pairs)
NX55P Specifications:
Model
SYSTEM TYPE PROGRAM POWE R (watts) IMP EDANCE (ohms) FREQ. RESPO NSE (Hz +/- 3dB) SENSITIVIT Y (dB@1W/1m) MAXIMUM SPL (dB) X-OVE R FREQ UEN CY (Hz) LF DRI VER(S) HF HORN HF DRIVER HF HORN THROAT DIAMETER HF DISPER SION (H° x V°) HF PROTECTION LF PROTE CTION CONSTRUCTION GRILLE INPUTS
MIXE R / CONTRO LS
LOOP I N / OUTPUTS HANDLES FLYWARE TYPE / QUANTITY FLYWARE LOCATIONS OPTIONAL ACCESSORIES STAND MOUNT ADAPTOR DIMENSI ONS (DxWxHxBW inches) DIMENSI ONS (DxWxHxBW cm) WEIGHT (lbs / kg)
NX55P
Active 2-Way Bi-Amplified 450 LF + 100 HF
­5 - 18000
4
-
125 2000 12" Neodymium Molded Composite 1" Aluminum
1.4" 80 X 50 Thermal / Peak Limiter Thermal / Overcurrent Molded Composite Perforated Metal XLR-F (mic) 1/4" TRS balanced (x2) Mic/Line Gain / 2-Band EQ +/- 6 dB Input Trim Control Subwoofer Tuning / Selection Switch XLR-M / XLR-F 1/4" TRS balanced (x2) 1 x Side Bar 1/4-20 x 5 2 Top / 1 Bottom NXF Brackets Yes
12.25 x 16 x 26.5 x 9
31.1 x 40.6 x 67.3 x 22.9 41 / 18.6
y orkville.com
Loading...