4
4 C h a n n e l P o w e r e d M i x e r
POWERED MIXER
with Digital Effects
LEVEL 4 |
5 |
6 |
EFX 4 |
5 |
6 |
LEVEL 4 |
5 |
6 |
EFX 4 |
5 |
6 |
LEVEL 4 |
5 |
6 |
EFX 4 |
5 |
6 |
LEVEL 4 |
5 |
6 |
EFX 4 |
5 |
6 |
|
|
4 C h a n n e l P o w e r4e d M i x e r |
|
||||||||
3 |
|
7 |
3 |
|
7 |
3 |
|
7 |
3 |
|
7 |
3 |
|
7 |
3 |
|
7 |
3 |
|
7 |
3 |
|
7 |
|
|
|
|||||||||
21 |
|
98 |
21 |
|
98 |
21 |
|
98 |
21 |
|
98 |
21 |
|
98 |
21 |
|
98 |
21 |
|
98 |
21 |
|
98 |
|
|
|
|||||||||
0 |
|
10 |
0 |
|
10 |
0 |
|
10 |
0 |
|
10 |
0 |
|
10 |
0 |
|
10 |
0 |
|
10 |
0 |
|
10 |
|
5 |
EFFECTS |
5 |
|
|
|
|
5 |
|
|
|
Hi |
|
|
Lo |
|
|
Hi |
|
|
Lo |
|
|
Hi |
|
|
Lo |
|
|
Hi |
|
|
Lo |
|
|
4 |
6 |
4 |
6 |
|
|
4 |
6 |
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 |
|
7 |
3 |
|
|
7 |
3 |
|
|
7 |
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 |
|
8 |
2 |
|
|
8 |
2 |
|
|
8 |
|
-15 |
|
+15 |
-15 |
|
+15 |
-15 |
|
+15 |
-15 |
|
+15 |
-15 |
|
+15 |
-15 |
|
+15 |
-15 |
|
+15 |
-15 |
|
+15 |
1 |
|
9 |
1 |
|
|
9 |
1 |
|
|
9 |
|
dB |
dB |
dB |
dB |
dB |
dB |
dB |
dB |
0 Level10 |
0Repeat10 |
|
|
0 Delay10 |
POWER |
||||||||||||||||||||||
|
|
|
Line |
|
|
|
|
|
Line |
|
|
|
|
|
Line |
|
|
|
|
|
Tape / CD |
|
|
MAIN |
4 5 |
6 |
TAPE |
4 |
5 |
6 |
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Line In |
|
|
|
3 |
|
7 |
|
3 |
|
|
|
7 |
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 |
|
8 |
|
2 |
|
|
|
8 |
|
|
|
|
|
c |
|
1 |
|
|
|
c |
|
2 |
|
|
|
c |
|
3 |
|
|
|
c |
|
4 |
|
1 |
|
9 |
|
1 |
|
|
|
9 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0 |
10 |
|
|
0 |
|
10 |
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TYPE: YS1038
OWNER'S MANUAL
MANUEL DE L'UTILISATEUR
IMPORTANT SAFETY INSTRUCTIONS
INSTRUCTIONS PERTAINING TO A RISK |
INSTRUCTIONS RELATIVES AU RISQUE |
OF FIRE, ELECTRIC SHOCK, |
DE FEU, CHOC ÉLECTRIQUE, OU |
|
BLESSURES AUX PERSONNES. |
CAUTION:
Read Instructions:
The Owner’s Manual should be read and understood before operation of your unit. Please, save these instructions for future reference.
Packaging:
Keep the box and packaging materials, in case the unit needs to be returned for service.
Warning:
When using electric products, basic precautions should always be followed, including the following:
Power Sources:
Your unit should be connected to a power source only of the voltage specified in the owners manual or as marked on the unit. This unit has a polarized plug. Do not use with an extension cord or receptacle unless the plug can be fully inserted. Precautions should be taken so that the grounding scheme on the unit is not defeated.
Hazards:
Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall, causing serious personal injury and serious damage to the product. Use only with cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product. Follow the manufacturer’s instructions when installing the product and use mounting accessories recommended by the manufacturer.
The apparatus should not be exposed to dripping or splashing water; no objects filled with liquids should be placed on the apparatus.
Terminals marked with the “lightning bolt” are hazardous live; the external wiring connected to these terminals require installation by an instructed person or the use of ready made leads or cords.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
Power Cord:
The AC supply cord should be routed so that it is unlikely that it will be damaged. If the AC supply cord is damaged DO NOT OPERATE THE UNIT.
Service:
The unit should be serviced only by qualified service personnel.
AVIS:
AFIN DE REDUIRE LES RISQUE DE CHOC ELECTRIQUE, N’ENLEVEZ PAS LE COUVERT (OU LE PANNEAU ARRIERE). NE CONTIENT AUCUNE PIECE REPARABLE PAR L’UTILISATEUR.
CONSULTEZ UN TECHNICIEN QUALIFIE
POUR L’ENTRETIENT.
Veuillez lire le manuel:
Il contient des informations qui devraient êtres comprises avant l’opération de votre appareil. Conservez S.V.P. ces instructions pour consultations ultérieures
Emballage:
Conservez la boite au cas ou l’appareil devait être retourner pour réparation.
Attention:
Lors de l’utilisation de produits électrique, assurez-vous d’adhérer à des précautions de bases incluant celle qui suivent:
Alimentation:
L’appareil ne doit être branché qu’à une source d’alimentation correspondant au voltage spécifié dans le manuel ou tel qu’indiqué sur l’appareil. Cet appareil est équipé d’une prise d’alimentation polarisée. Ne pas utiliser cet appareil avec un cordon de raccordement à moins qu’il soit possible d’insérer complètement les trois lames. Des précautions doivent êtres prises afin d’eviter que le système de mise à la terre de l’appareil ne soit désengagé.
Risque:
Ne pas placer cet appareil sur un chariot, un support, un trépied ou une table instables. L’appareil pourrait tomber et blesser quelqu’un ou subir des dommages importants. Utiliser seulement un chariot, un support, un trépied ou une table recommandés par le fabricant ou vendus avec le produit. Suivre les instructions du fabricant pour installer l’appareil et utiliser les accessoires recommandés par le fabricant.
Il convient de ne pas placer sur l’appareil de sources de flammes nues, telles que des bougies allumées.
L’appeil ne doit pas être exposé à des égouttements d’eau ou des éclaboussures et qu’aucun objet rempli de liquide tel que des vases ne doit être placé sur l’appareil.
Les dispositifs marqués d’une symbole “d’éclair” sont des parties dangereuses au toucher et que les câblages extérieurs connectés à ces dispositifs de connection extérieure doivent être effectivés par un opérateur formé ou en utilisant des cordons déjà préparés.
Cordon d’alimentation:
Évitez d’endommager le cordon d’alimentation. N’UTILISEZ PAS L’APPAREIL si le cordon d’alimentation est endommagé.
Service:
Consultez un technicien qualifié pour l’entretien de votre appareil.
safety-4v0.pdf 04/29/03
We at Yorkville Sound are confident that the new MM4D will be a wonderful addition to your sound reinforcement arsenal. This manual contains information to help you get the maximum performance from your MM4D, please take the time to read it over.
•XLR microphone inputs on all 4 channels.
•¼-inch TRS line level inputs on channels 1 through 3.
•Dual-RCA input built-into channel 4 for easy hookup for CD-Players and Cassette Decks.
•Amplifier delivers 150 watts of power (150 W @ 4-ohms).
•Effects level controls on all 4 channels with a Master level control at the final stage.
•Customizable Built-in Effects with Repeat and Delay controls.
•All channels have Hi and Lo equalization controls.
•RCA Tape In/Out.
•1/4-inch TRS Amp In / Line Out
•Voltage select switch for easy selection of 120V or 230V operation.
•Rugged enclosure
•Fan cooled
1
1/4-inch Phone Plug
1/4-inch T.R.S. Phone Plug
XLR Plug
2
Input Channnels
The power LED above the power switch will illuminate when the MM4D is turned on.
All channels of the MM4D have balanced XLR microphone inputs for use with low-impedance microphones.
In addition, channels 1 through 3 also feature ¼-inch TRS input jacks and will accept line level, high-impedance signals from synthesizers, (unbalanced) microphones, electric pianos etc.
TRS (Tip = 0°, Ring = -180°, Sleeve = Gnd)
For convenience, channel 4 includes a dual-RCA line-level input instead of the ¼-inch jack. Stereo signals from CD-Players or tape decks are easily used with the MM4D (stereo sources are electronically summed into a mono signal when plugged into the dual-RCA jacks).
NOTE: Do not connect signals to both inputs on any one channel simultaneously. Use either the unbalanced or the balanced input on any one channel, but not both. Connecting to both inputs on one channel will cause improper operation of the input circuit.
Use the individual Level controls to adjust the comparative volumes of each channel.
The amount of Echo can be adjusted for individual channels by using the EFX control. A master Echo Level control adjusts the total amount of effect at the final stage in the mixing bus.
The digital Effects, built into the MM4D, are extremely versatile. Adjusting the Repeat and Delay settings produce excellent delay, reverb and echo effects. The Repeat control adjusts the the amount of time the effect lasts while the Delay control adjusts the speed.
Each channel of the MM4D uses Lo and Hi shelving equalization centered at 80 Hz (Lo) and 12 kHz (Hi).
The EQ controls have a +/- 15 dB boost/cut range providing greater versatility for shaping the input signal’s tone. Signals remain unchanged when the controls are set to the center (or “0”) position (a flat equalization setting).
The MAIN level adjusts the overall output volume of the MM4D. Signals from channels 1 through 4 and Tape In jack are routed through to the main mixing bus.
When a ¼-inch TRS phone plug is inserted into the Main Out / Amp In jack, the MM4D’s connection from the main mixing bus to the MM4D’s power amplifier is interrupted. (The signal path going from the MM4D’s mixer to the internal amplifier is broken.)