Yokogawa FX1002, FX1004, FX1006, FX1008, FX1010 User Manual

User ’s
Manual

Model FX1002/FX1004/FX1006/FX1008/

FX1010/FX1012

FX1000 Paperless Recorder
First Step Guide

IM 04L21B01-02EN

6th Edition

Contents

Introduction ................................................................................................................................................................3

Safety Precautions .....................................................................................................................................................3

Handling Precautions of the FX .................................................................................................................................4

CF Card Handling Precautions ..................................................................................................................................4

SD Card Handling Precautions ..................................................................................................................................5

Checking the Contents of the Package .....................................................................................................................5

Protection of Environment .........................................................................................................................................7

Conventions Used in This Manual .............................................................................................................................7

Introduction to Functions .............................................................................................................................................8

Measured Items .........................................................................................................................................................8

Data Storage Function ...............................................................................................................................................8

Display Function ........................................................................................................................................................8

Other Functions .........................................................................................................................................................8

DAQSTANDARD for FX1000 .....................................................................................................................................8

FX System Conguration ...........................................................................................................................................9

Terminology ...............................................................................................................................................................9

Names of Parts ............................................................................................................................................................10

FX1000 Workow .........................................................................................................................................................11

Basic Operation ...........................................................................................................................................................12

Panel Keys ...............................................................................................................................................................12

Display .....................................................................................................................................................................12

Display on the Status Display Section .....................................................................................................................13

Run Modes ..............................................................................................................................................................14

Entering Values and Characters ..............................................................................................................................15

Inserting/Removing a CF Card/SD Card .................................................................................................................16

Setting the Functions and Operations ......................................................................................................................18

Setting the Date/Time ..............................................................................................................................................18

Setting the Input Range ...........................................................................................................................................19

Setting the Temperature Measurement Channel, the Input Range, and the Tag ...............................................19

Setting the Flow Rate Measurement Channel, the Input Range, the Alarm, and Tag .............................................22

Assigning Channels to Groups ................................................................................................................................23

Setting the Time Scale .............................................................................................................................................24

Saving the Setup Data .............................................................................................................................................25

Starting Memory Sampling ......................................................................................................................................26

Stopping Memory Sampling .....................................................................................................................................26

Switching the Trend Display, Digital Display, and Bar Graph Display ......................................................................27

Writing the Message “START” .................................................................................................................................28

Monitoring the FX on a PC Browser (Ethernet) (/C7 Option) ...................................................................................30

Displaying the Measured Data on DAQSTANDARD .................................................................................................33

IM 04L21B01-02EN

1

Contents

FX1000 User’s Manual (Electronic Manual: IM04L21B01-01EN)

Chapter 1 Overview of Functions
Chapter 2 Common Operations
Chapter 3 Measurement Channels and Alarms
Chapter 4 Switching Operation Screens
Chapter 5 Operations for Changing the Displayed Contents
Chapter 6 Saving and Loading Data
Chapter 7 Customizing the Action Using the Event Action and Remote Control Functions (/R1 and /PM1 Options)
Chapter 8 Using the Security Function
Chapter 9 Computation and Report Functions (/M1, /PM1, /PWR1, and /PWR5 Options)
Chapter 10 Troubleshooting
Chapter 11 Calibration
Chapter 12 Installing and Wiring

Chapter 13 Specications

Chapter 14 Setup Items

FX1000 Communication Interface User’s Manual (Electronic Manual: IM04L21B01-17EN)

Chapter 1 Using the Ethernet Interface (/C7 Option)
Chapter 2 Using the Serial Interface (/C2 and /C3 Options)
Chapter 3 Commands
Chapter 4 Responses
Chapter 5 Status Reports

Chapter 6 Specications

2

IM 04L21B01-02EN

“Handle with care.” To avoid injury and damage to

Direct current

Introduction

Thank you for purchasing the FX1002, FX1004, FX1006, FX1008,
FX1010, or FX1012 Paperless Recorder (hereafter referred to
as “FX” or “FX1000”).This manual describes the basic operating
procedures of the FX. To ensure correct use, please read this
manual and the manuals below thoroughly before beginning
operation.

Paper Manual

Manual Title Manual No.

Model FX1002/FX1004/FX1006/FX1008/
FX1010/FX1012
FX1000 Paperless Recorder Safety
Precautions and Installation Guide
Installing the FXA120 DAQSTANDARD
FX1000 Mode Transition Diagram
Setting Mode / Basic Setting Mode Maps

Electronic Manuals

You can download these manuals from the following web page. You
will need Adobe Reader 7 or later (latest version recommended) by
Adobe Systems.

http://www.yokogawa.com/ns/fx1000/im/

Manual Title Manual No.

Model FX1002/FX1004/FX1006/FX1008/
FX1010/FX1012

FX1000 Paperless Recorder User’s
Manual

Model FX1002/FX1004/FX1006/FX1008/
FX1010/FX1012

FX1000 Paperless Recorder First Step
Guide

Model FX1002/FX1004/FX1006/FX1008/
FX1010/FX1012

FX1000 Paperless Recorder Safety
Precautions and Installation Guide
Installing the FXA120 DAQSTANDARD
FX1000 Mode Transition Diagram
Setting Mode / Basic Setting Mode Maps

Model FX1002/FX1004/FX1006/FX1008/
FX1010/FX1012

FX1000 Paperless Recorder
Communication Interface
(/C2, /C3, and /C7)

FXA120 DAQSTANDARD for FX1000
Data Viewer

FXA120 DAQSTANDARD for FX1000
Hardware Configurator

IM 04L21B01-03EN

IM 04L21B01-01EN

IM 04L21B01-02EN

IM 04L21B01-03EN

IM 04L21B01-17EN

IM 04L21B01-63EN

IM 04L21B01-64EN

*

*

Notes

• The contents of this manual are subject to change without prior
notice as a result of continuing improvements to the instrument’s
performance and functions.

• Every effort has been made in the preparation of this manual to
ensure the accuracy of its contents. However, should you have
any questions or find any errors, please contact your nearest
YOKOGAWA dealer.

• Copying or reproducing all or any part of the contents of this
manual without YOKOGAWA’s permission is strictly prohibited.

• The TCP/IP software of this product and the document
concerning the TCP/IP software have been developed/created
by YOKOGAWA based on the BSD Networking Software,
Release 1 that has been licensed from the Regents of the
University of California.

QR Code

The product has a QR Code pasted for efficient plant maintenance
work and asset information management.
It enables confirming the specifications of purchased products and
user’s manuals.
For more details, please refer to the following URL.

https://www.yokogawa.com/qr-code

QR Code is a registered trademark of DENSO WAVE

INCORPORATED.

Revisions

1st Edition: November, 2011
2nd Edition: September, 2012
3rd Edition: April, 2013
4th Edition: November, 2015
5th Edition: August, 2017
6th Edition: June, 2020

Trademarks

•

Microsoft and Windows are registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries.

• Adobe and Acrobat are registered trademarks or trademarks of
Adobe Systems Incorporated.

• Company and product names that appear in this manual are
registered trademarks or trademarks of their respective holders.

• The company and product names used in this manual are not accompanied
by the registered trademark or trademark symbols (® and ™).

Safety Precautions

• This instrument conforms to IEC safety class I (provided with terminal
for protective grounding), Overvoltage Category II or I
Degree 2, and Measurement Category II (CAT II)
*1 II: Applied to standard power supply(100-240 VAC), I: Applied

to /P1 option (24 VDC/AC)

*2 Measurement Category II (CAT II) applies to measuring

circuits connected to low voltage installation, and electrical
instruments supplied with power from fixed equipment such
as electric switchboards.

• This instrument is an EN61326-1 (EMC standard) class A
instrument (for use in commercial, industrial, or business
environments). The influence rate (judgment condition A) in the
immunity test environment is within ±15 % of the range or ±10 mV.

• The general safety precautions described here must be
observed during all phases of operation. If the FX is used in a
manner not described in this manual, the FX safety features may
be impaired. Yokogawa Electric Corporation assumes no liability
for the customer’s failure to comply with these requirements.

• The FX is designed for indoor use.

• About User’s Manuals

• Please pass user’s manuals to the end user. We also ask you to
store user’s manuals in a safe place.

• Read user’s manuals thoroughly and have a clear understanding
of the product before operation.

• User’s manuals explains the functions of the product. They do not
guarantee that the product will suit a particular purpose of the user.

• Precautions Related to the Protection, Safety, and Alteration of
the Product

The following safety symbols are used on the product and in this
manual.

*2

.

*1

, Pollution

6th Edition: June 2020 (YK)
All Rights Reserved, Copyright © 2011, Yokogawa Electric Corporation

IM 04L21B01-02EN

the instrument, the operator must refer to the
explanation in the manual.

Protective ground terminal

Alternating current

• For the protection and safe use of the product and the system in

3

which this product is incorporated, be sure to follow the instructions
and precautions on safety that are stated in this manual whenever
you handle the product. Take special note that if you handle the
product in a manner that violates these instructions, the protection
functionality of the product may be damaged or impaired. In such
cases, YOKOGAWA does not guarantee the quality, performance,
function, and safety of product.

• When installing protection and/or safety circuits such as lightning
protection devices and equipment for the product and control
system or designing or installing separate protection and/or
safety circuits for fool-proof design and fail-safe design of the
processes and lines that use the product and the control system,
the user should implement these using additional devices and
equipment.

• If you are replacing parts or consumable items of the product,
make sure to use parts specified by YOKOGAWA.

• This product is not designed or manufactured to be used in
critical applications that directly affect or threaten human lives.
Such applications include nuclear power equipment, devices
using radioactivity, railway facilities, aviation equipment, air
navigation facilities, aviation facilities, and medical equipment.
If so used, it is the user’s responsibility to include in the system
additional equipment and devices that ensure personnel safety.

• Do not modify this product.

WARNING

• Use the Correct Power Supply

Ensure that the source voltage matches the voltage of the power

supply before turning ON the power.

• Connect the Protective Grounding Terminal

Make sure to connect the protective grounding to prevent

electric shock before turning ON the power.

• Do Not Impair the Protective Grounding

Never cut off the internal or external protective grounding wire or

disconnect the wiring of the protective grounding terminal. Doing
so invalidates the protective functions of the instrument and
poses a potential shock hazard.

• Do Not Operate with Defective Protective Grounding

Do not operate the instrument if the protective grounding might

be defective. Also, make sure to check them before operation.

• Do Not Operate in an Explosive Atmosphere

Do not operate the instrument in the presence of flammable liquids or

vapors. Operation in such an environment constitutes a safety hazard.

Prolonged use in a highly dense corrosive gas (H2S, SOx, etc.)

will cause a malfunction.

• Do Not Remove Covers

The cover should be removed by YOKOGAWA’s qualified

personnel only. Opening the cover is dangerous, because some
areas inside the instrument have high voltages.

• Ground the Instrument before Making External Connections

Connect the protective grounding before connecting to the item

under measurement or control unit.

• Damage to the Protection

Operating the instrument in a manner not described in this

manual may damage the instrument’s protection.

CAUTION

This instrument is a Class A product. Operation of this instrument

in a residential area may cause radio interference, in which case
the user is required to take appropriate measures to correct the
interference.

CAUTION

• Normal Operating Conditions

Ambient temperature: 0 to 50°C
Ambient humidity: 20 to 80%RH (However, less than moisture content of

°C

80% RH at 40°C or more), No condensation

40
Warm-up time: At least 30 minutes after power on
Installation location: Indoors
Operating altitude: 2000 m or less
Overvoltage Category: II or I

TEMPORARY OVERVOLTAGES: It may occur on the MAINS supply;
Short-term temporary overvoltage: 1460V
Long-term temporary overvoltage: 490V
Pollution degree: 2

WARNING

• Precaution on Relay Wiring

Since the insulation provided to each relay output terminal is Functional

insulation, provide Reinforced insulation to the external of the device as

necessary. (Refer to the drawing below.)

This product

Functional

insulation

voltage circuit

voltage circuit

A safety

A safety

This product

Functional

insulation

This product

Functional

insulation

A safety

voltage circuit

Reinforced insulation

A hazardous

voltage circuit

Reinforced insulation

A hazardous

voltage circuit

Reinforced insulation

A hazardous

voltage circuit

Reinforced insulation

A safety

voltage circuit

A hazardous

voltage circuit

A hazardous

voltage circuit

A hazardous

voltage circuit

• Exemption from Responsibility

• YOKOGAWA makes no warranties regarding the product except

those stated in the WARRANTY that is provided separately.

• YOKOGAWA assumes no liability to any party for any loss

or damage, direct or indirect, caused by the user or any

unpredictable defect of the product.

• Handling Precautions of the Software

• YOKOGAWA makes no warranties regarding the software

accompanying this product except those stated in the

WARRANTY that is provided separately.

• Use the software on a single PC.

• You must purchase another copy of the software, if you are to

use the software on another PC.

• Copying the software for any purposes other than backup is

strictly prohibited.

• Please store the original media containing the software in a safe

place.

• Reverse engineering, such as decompiling of the software, is

strictly prohibited.

• No portion of the software supplied by YOKOGAWA may be

transferred, exchanged, or sublet or leased for use by any third

party without prior permission by YOKOGAWA.

Handling Precautions of the FX

• Use care when cleaning this instrument, especially its plastic

parts. Use a soft dry cloth. Do not use organic solvents, such

as benzene or thinner, or other cleansers. They may cause

discoloring and deformation.

• Keep electrically charged objects away from the signal terminals.

If you do, the FX may malfunction.

• Do not apply volatile chemicals to the display, panel keys, etc.

Do not allow rubber and vinyl products to remain in contact

with the FX for long periods of time. If you do, the FX may

4

IM 04L21B01-02EN

malfunction.

name plate

• When not in use, make sure to turn OFF the power switch.

• If there are any symptoms of trouble such as strange odors or
smoke coming from the FX, immediately turn OFF the power
switch and the power supply source. Then, contact your nearest
YOKOGAWA dealer.

CF Card Handling Precautions

• Use caution in the handling of the external storage medium as it
is a delicate product.

• Write operation to storage media may fail under high­temperature or low-temperature environments. If you are using
the FX in a low-temperature environment (around 10 °C or
less), use the FX after the warm-up time (at least 30 minutes)
has elapsed. If you are using the FX under a high-temperature
environment (around 40 °C or more), it is recommended that the
external storage medium be inserted into the drive when saving
the data and be removed after the data storage operation is
finished.

• Remove the storage medium from the drive when turning the FX
ON/OFF.

• Touching the compact flash section when static electricity is built
up on the human body can lead to erroneous operation.

• For the general handling precautions of the external storage
medium, see the instruction manual that came with the external
storage medium.

• Yokogawa provides no warranty for damage to, or loss of data
recorded on the SD card, regardless of the cause of such
damage or loss. Please always make backup copies of your
data.

• Do not store or use the SD card in places with static electricity,
near electrically charged objects, or where electrical noise is
present. Doing so can result in shock or damage.

• Do not disassemble or modify the SD card. Doing so can result
in damage.

• Only use Yokogawa SD cards. Operation cannot be guaranteed
with other brands of card.

• Never touch the SD card with wet hands. Doing so can lead to
shock or malfunction.

• Never use the SD card if it is dusty or dirty. Doing so can lead to
shock or malfunction.

SD Card Handling Precautions

• SD cards are delicate and should be handled with caution.

• Yokogawa provides no warranty for damage to, or loss of data
recorded on the SD card, regardless of the cause of such
damage or loss. Please always make backup copies of your
data.

• Do not store or use the SD card in places with static electricity,
near electrically charged objects, or where electrical noise is
present. Doing so can result in shock or damage.

• Do not disassemble or modify the SD card. Doing so can result
in damage.

• Do not physically shock, bend, or pinch the SD card. Doing so
can lead to malfunction.

• During reading/writing of data, do not turn OFF the power,
apply vibration or shock, or pull out the card. Data can become
corrupt or permanently lost.

• Only use Yokogawa SD cards. Operation cannot be guaranteed
with other brands of card.

• When inserting the SD card into the instrument, make sure you
orient the card correctly (face up or down) and that you insert it
securely. If not inserted correctly, the card will not be recognized
by the instrument.

• Never touch the SD card with wet hands. Doing so can lead to
shock or malfunction.

• Never use the SD card if it is dusty or dirty. Doing so can lead to

shock or malfunction.

• The SD card comes formatted.
SD cards must be formatted according to the standard

established by the SD Association (https://www.sdcard.org/
home). Use the SD card formatter software available from the
above SD Association to format SD cards on a PC. You cannot
format SD cards on the FX.

• You can use SD/SDHC cards (up to 32 GB) on the FX.

• The write protected SD card cannot be used on this product.

• SD-Card is intended for transfer of data between FX1000 and a
target system (and not for transferring data between third party
systems)

SD Card Specications

Electrical specifications Operating voltage: 2.7 V to 3.6 V

Operating temperature/
humidity
Storage temperature/
humidity

(memory operation)
–25 to 85°C/20 to 85%RH
(no condensation)
–40 to 85°C/5 to 85%RH
(no condensation)

Unit: mm

24±0.1

Writable

WP

SD

32±0.1

Write-protected

CAUTION

• Do not access the storage medium in a place with vibrations or
shock. The storage medium or drive may malfunction.

Checking the Contents of the Package

Unpack the box and check the contents before operating the
instrument. If some of the contents are not correct or missing or
if there is physical damage, contact the dealer from which you
purchased them.

FX

A name plate is located on the top panel of the FX. Check that the
model name and suffix code given on the name plate match those
on your order.

NO. (Instrument Number)

When contacting the dealer from which you purchased the
instrument, please give them the instrument number.

IM 04L21B01-02EN

5

Model and Su󰀩x Codes

Model
code

FX1002

FX1004

FX1006 6ch, Shortest measurement interval:1s

FX1008 8ch, Shortest measurement interval:1s

FX1010

FX1012

External
storage
medium
slot

Language -2

Withstanding
voltage between
measuring input
terminals

Options /A1 Alarm output 2 points (C-contact)

Suffix code

-0 Without CF card slot/SD card slot and

-4 With CF card slot and medium

-7 With SD card slot and medium

Optional
code

-H 1000 VAC(50/60 Hz), 1 min

-L 400 VAC(50/60 Hz), 1 min

/A2 Alarm output 4 points (C-contact)

/A3 Alarm output 6 points (C-contact)

/A4A Alarm output 12 points (A-contact)

/C2 RS-232 interface

/C3 RS-422A/485 interface

/C7 Ethernet interface

/F1 FAIL/Status output

/M1

/N2 3 leg isolated RTD

/N3F Extended input type (without Pt1000)

/P1 24 VDC/AC power supply

/R1 Remote control 8 points

/TPS2 24VDC transmitter power supply (2

/TPS4 24VDC transmitter power suply (4

/USB1 USB interface (1 port)

/PM1 Pulse input 3 points, Remote control

/CC1 Calibration correction function

/LG1 Log scale

/PWR1 Power monitor (1 A input, including

/PWR5 Power monitor (5 A input, including

/S# Customized product; details in IM

Description

2ch, Shortest measurement interval:125ms

4ch, Shortest measurement interval:125ms

10ch, Shortest measurement interval:1s

12ch, Shortest measurement interval:1s

(Note)

medium

English/German/French/Italian/ Spanish/
Portuguese/ Russian/ Korean
deg F and DST

*2

*2

*3

Mathematical functions (including Report
functions)

*6*10

loops)

*7

loops)

5 points (including Mathematical func-

*8

tions)

Mathmatical functions)

Mathmatical functions)

FX1K-S#E

*4

*5

*9*10

*10*11

*12

*1*10

*1

*1*3

*1*3

Note: To load data, the FX must be equipped with a communication
interface (/C2, /C3 or /C7 option) or the USB interface (/USB1 option.)
*1 Any combination of /A1, /A2, /A3, and /A4A cannot be specified

together.
*2 /C2 and /C3 cannot be specified together.
*3 /A3 or /A4A cannot be specified together with /F1.
*4 /N2 cannot be specified for FX1002 or FX1004.
*5 If /R1 is specified, /A4A, /TPS2, /TPS4, /PM1, /PWR1, or /PWR5

cannot be specified.
*6 If /TPS2 is specified, /TPS4, /A2, /A3, /A4A, /F1, /R1, or /PM1

cannot be specified.
*7 If /TPS4 is specified, /TPS2, /A1, /A2, /A3, /A4A, /F1, /R1, or /

PM1 cannot be specified.
*8 If /PM1 is specified, /A4A, /M1, /R1, /TPS2, /TPS4, /PWR1, or /

PWR5 cannot be specified.
*9 If /PWR1 is specified, /A3, /A4A, /F1, /R1, /PM1, /M1, or /PWR5

cannot be specified.

*10 /TPS2, /PWR1, and /A1 cannot be specified together. /TPS2, /

PWR5, and /A1 cannot be specified together.

*11 If /PWR5 is specified, /A3, /A4A, /F1, /R1, /PM1, /M1, or /PWR1

cannot be specified.

*12 Contact your supplier in case your instrument has option /S#

(where ‘#’ is a number), and you are not in the possession of IM
FX1K-S#E.

Standard Accessories

The standard accessories below are supplied with the instrument.
Check that all contents are present and undamaged.

1 2

3

No. Name Model Qty. Notes

1 Mounting brackets B8730BU 2 For panel

2 Rubber packing

for dust and water
protection

3 Model FX1002/

FX1004/FX1006/
FX1008/FX1010/
FX1012

FX1000 Paperless
Recorder Safety
Precautions and
Installation Guide

Installing
the FXA120
DAQSTANDARD
FX1000 Mode
Transition Diagram
Setting Mode / Basic
Setting Mode Maps

4 CF card

5 SD card

*1 On FXs that have a CF card slot (suffix code -4.)
CF card capacity is subject to change.
*2 On FXs that have a SD card slot (suffix code -7.)
SD card capacity is subject to change.

*1

*2

4

- 1 For single-unit

IM 04L21B01-03EN

772093 1 512 MB

773001 1 1 GB

5

mounting

mounting

1 A3 size

Softoware (FXA120 DAQSTANDARD for FX1000), Label

Please download the software and the label data from the following
web page.
http://www.yokogawa.com/ns/fx1000/soft/

Item Description

Software FXA120 DAQSTANDARD for FX1000

Label Labels to Attach to the FX1000 Operation Cover

Consists of the Data Viewer and the Hardware Configurator.

Download the label data (Excel file). Print the label that you
want to use.

Label size: 19 ± 0.3 mm tall and 90 ± 0.3 mm wide

File name: IM04L21B01-81Z1.xls

6

IM 04L21B01-02EN

Release number

Optional Accessories (Sold Separately)

The following optional accessories are available for purchase
separately. If you make an order, make sure that all contents
are present and undamaged. For information about ordering
accessories, contact the dealer from which you purchased the FX.

No. Name Model Q’ty Notes

1 CF card 772093 1 512 MB

2 Shunt resistor

3 Mounting

brackets

4 Terminal screws B8730CZ – M3 (spares for I/O

5 SD card 773001 – 1 GB

Style number, release number, and firmware

772094 1 1 GB

772095 1 2 GB

X010-250-3

X010-100-3

X010-010-3

B8730BU 2 –

B8730CY – M4 (spares for power

1 250 Ω ± 0.1%

1 100 Ω ± 0.1%

1 10 Ω ± 0.1%

terminals)

terminals)

version number of the FX

Style number: This is the FX hardware number that is indicated

on the name plate.

Release number: This is the FX firmware number that is indicated

on the name plate. The number corresponds to
the integer part of the firmware version number.

Example: If the firmware version number is 2.01, the release

number is 2.

Firmware version number: This number is displayed on the FX

system information screen. For the procedure,
see section 2.5, “Viewing the FX Information” in
the FX1000 User’s Manual, IM 04L21B01-01EN.

Style number

Conventions Used in This Manual

• This manual covers information regarding FX1000 that have a
suffix code for language “-2” (English).

• For details on how to set the language, see section 2.6,
“Changing the Displayed Language” in the FX1000 User’s
Manual, IM 04L21B01-01EN.

Unit

K: Denotes 1024. Example: 768 KB (file size)
k: Denotes 1000.
The following markings are used in this manual.

Improper handling or use can lead to injury to the user or damage
to the instrument. This symbol appears on the instrument to

indicate that the user must refer to the user’s manual for special
instructions. The same symbol appears in the corresponding place
in the user’s manual to identify those instructions. In the manual,
the symbol is used in conjunction with the word “WARNING” or
“CAUTION.”

WARNING

Calls attention to actions or conditions that could cause serious or
fatal injury to the user, and precautions that can be taken to prevent
such occurrences.

CAUTION

Calls attentions to actions or conditions that could cause light
injury to the user or damage to the instrument or user’s data, and
precautions that can be taken to prevent such occurrences.

Note

Calls attention to information that is important for proper operation
of the instrument.

Indicates after this mark reference to related procedure or
explanation.

Bold characters

Indicates character strings that appear on the screen and the
operation keys.

Protection of Environment

Control of Pollution Caused by the Product

For details, see the FX1000 Safety Precautions and Installation
Guide, IM04L21B01-03EN.

How to Dispose the Batteries

This is an explanation about the new EU Battery Directive
(DIRECTIVE 2006/66/EC). This directive is only valid in the EU.
Batteries are included in this product. Batteries incorporated into
this product cannot be removed by yourself. Dispose them together
with this product. When you dispose this product in the EU, contact
your local Yokogawa Europe B.V.office. Do not dispose them as
domestic household waste.
Battery type: Lithium battery

Notice: The symbol (see above) means they shall be sorted out
and collected as ordained in ANNEX II in DIRECTIVE 2006/66/EC.

IM 04L21B01-02EN

7

Introduction to Functions

Trend display

Numeric (digital) display

Overview display Bar graph display

Measured Items

You can connect DC voltage, thermocouple, RTD, and ON/OFF input and measure
various values such as temperature and flow rate. The FX samples the input signals at
the scan interval to obtain the measured values. The fastest scan interval is 125 ms on
the FX1002 and FX1004, and 125 ms on the FX1006, FX1008, FX1010, and FX1012.
Up to four alarm conditions can be set for each measurement channel.

Data Storage Function

There are two methods of recording measured data. One is to record the measured data
continuously, and the other is to record only when certain events occur such as alarms.
The measured data is recorded to the internal memory at a specified interval. The data in
the internal memory can be stored to a CF card/SD card

FX

*1

automatically or manually.

Display Function

Other Functions

Internal memory

Measurement input

*1 On FXs that have a CF card slot or an SD card slot

CF card/SD card

*1

Measured data can be displayed as trends, numeric values, and bar graphs for each
group. In addition, the overview display can be used to display and monitor all channels
on a single screen.

Mathematical Function

(/M1, /PM1, /PWR1, and /PWR5
options)
FAIL/status output function
(/F1 option)

Remote control function

(/R1 option)

Security function Enables only registered users can operate the

Communication function

(/C2, /C3, and /C7 options)

Various types of computation can be performed by
assigning equations to computation channels (Math
channels.)
Outputs an alarm when the FX fails. The function
also monitors the FX status such as the remaining
amount of internal memory and outputs alarms.
A specified action is executed when a remote input
signal is applied to the terminal on the rear panel.

FX. The function can also be used to prohibit key
operation.
The Ethernet interface can be used to monitor the FX
using a Web browser and transmit e-mail when an
event occurs such as an alarm. In addition, data of
devices on the network can be loaded and displayed
using the Modbus protocol.

8

DAQSTANDARD for FX1000

The accompanying software program, DAQSTANDARD for FX1000, can be used to
display the measured data, convert the measured data format, and create FX setup data.

IM 04L21B01-02EN

FX System Configuration

Transmitter power supply

**: On FXs that have a CF card slot or an SD card slot

The FX can be used to configure a system as shown below.
Referenced sections are of the FX1000 User’s Manual (IM 04L21B01-01EN.)

Introduction to Functions

Communication Interface User’s Manual
(IM 04L21B01-17EN)

Ethernet

controller

Signal input

Sec. 3.3

Pulse input

Sec. 3.10

AC voltage and current

Sec. 3.12

Logarithmic DC voltage

Sec. 3.13

Alarm output

Sec. 3.5 to 3.8

FAIL/status output

*

*

*

*

*

*

Sec. 2.9

PC

RecorderTemperature

Serial
communication*

RS-232, RS-422A/485

CF card/SD card

FX

USB port*

Keys

Remote input

Sec. 7.1

PC

PLC

**

USB flash memory

Sec. 2.11

Keyboard

Sec. 2.10

*

Terminology

IM 04L21B01-02EN

*: Option

• Memory sample

The operation of recording measured data.

• Memory start

The operation of starting memory sampling.

• Memory stop

The operation of stopping memory sampling.

• Display data

The waveform data shown on the FX display. The data recorded at the sampling

interval for the displayed data.

• Event data

Measured data recorded at a sampling interval separate from that of the display data.

• Manual sample

The operation of recording measured data (instantaneous value) manually.

9