Yokogawa FT5V User Manual

User's Manual
1
Thank you for purchasing the JUXTA Signal Conditioner. Please read through this manual before use for correct handling.
Network Solutions Business Division
IM 77J08T05-01E
1st Edition Jan. 2007 (YK)
CAUTIONARY NOTES FOR SAFE USE OF THE PRODUCT
This User’s Manual should be carefully read before installing and operating the product. The following symbol is used on the product and in this manual to ensure safe usage.
Th is sym bol is dis pla yed on the pr oduct w hen it is
necessary to refer to the User's Manual for information
on pe rso nal and ins trume nt safet y. Th is sy mbo l i s
displayed in the User's Manual to indicate precautions
to a void dan ge r t o the op er ator, suc h as an elect ri c
shock.
The following symbols are used only in this manual.
NOTE
D r a w s a t t e n t i o n t o e s s e n t i a l i n f o r m a t io n f o r
understanding
the operations and/or functions of the product.
CHE CKING PRODUCT SPE CIFICATION S AND PACKAGE
(1) Checking the Model and Product Specications
Check that the model and specifications indicated on the
nameplate attached to the main unit are as ordered.
(2) Packaged Items
Check that the package contains the following items:
FT5A or FT5V: 1
Mounting block: 2
Tag number and range label : 1 each
Mounting screw (M4 x 0.7): 2
User’s Manual (this manual : IM 77J08T05-01E)
GENERAL
The FT5A/FT5V is a free range type thermocouple converter that
is connected to an IEC/JIS-standard thermocouple (TC), such as
a Type K, T, E, J, R, S, B or N thermocouple to convert tempera-
ture signals into isolated
DC current or DC voltage signals.
Selection of input type (sensor type), temperature unit (°C, K), I/
O range setting, burnout setting, output adjustment, RJC on/off
and I/O monitoring can be made using the optional Parameter
Setting Tool (VJ77) or Handy Terminal (JHT200).
MODEL AND SUFFIX CODES
Model Sufx codes Description
FT5A -
 
*C /Thermocouple converter
(Free Range Type)
FT5V Input -1 K (CA)
-2 T (CC)
-3 E (CRC)
-4 J (IC)
-5 R
-6 S
-7 B (RH)
-8 N
-0
Custom order
Output A 4 to 20 mA DC FT5A
B 2 to 10 mA DC C 1 to 5 mA DC D 0 to 20 mA DC E 0 to 16 mA DC F 0 to 10 mA DC G 0 to 1mA DC Z Custom order 1 0 to 10 mV DC FT5V 2 0 to 100 mV DC 3 0 to 1 V DC 4 0 to 10 V DC 5 0 to 5 V DC 6 1 to 5 V DC 7 -10 to 10 V DC
0 Custom order Style code *C Style C Burnout /BU Up
/BD Down /BN None
Temperature unit /DF Fahrenheit (°F) display function
Models FT5A, FT5V Thermocouple Converter (Free Range Type)
2
IM 77J08T05-01E 1st Edition 2007.01.15-00
1. MOUNTING METHOD
1.1 Installing/Uninstalling the Mounting Block
The mou nt in g bloc k is necessary for rack mounting or w al l
mounting.
Installing the mounting block
Fit the mounting block into the grooves of the converter,
and slide it in the direction of an arrow as shown below-
left.
Uninstalling the mounting block
Lift the stopper using a slotted screw-driver as shown
below-right, and pull the mounting block to remove it.
Groove
(Rack mounting)
Groove (Wall mounting)
Stopper
Mounting block
1.2 Rack Mounting
Take the FRK panel and install it on mounting angle as shown
below.
Th is m etho d is sui tab l e f o r h i gh dens i ty moun t ing of the
converters on a 19-inch rack panel.
Mounting angle
Mounting angle
Mounting Dimensions
450±1
465±1
M5 screw (4 places)
Supplied spacer(50) or Wiring space(30 to 60)
FRK panel
Mounting screw (M4x0.7) (2 screws in the package)
50
25
25
50
Unit: mm
1.3 Wall Mounting
Mount the converter onto the FRK panel as shown below or
mount it directly on the wall.
FRK panel
1.4 DIN Rail Mounting
Place the converter so that the DIN rail ts into the upper part of
the DIN-rail groove at the rear of the socket, and fasten the socket
using the slide lock located underneath the socket.
To remove the converter, pull down the slide lock using a slotted
screw-driver.
Slide lock
DIN rail
DIN rail groove
1.5 Mounting Dimensions
Mounting angle
M4×0.7 Mounting screw
Support
24.524.5
24.5
24.5 24.5
Angle Mounting Dimensions
n×24.5+2
M4×0.7 Mounting screw
Unit: mm
73 90
24.524.5
24.5 24.5 24.5
Wall Mounting Dimensions
90
2. INSTALLATION LOCATION
Avoid the following environments for installation locations: Areas with vibration, corrosive gases, dust, water, oil, solvents,
direct sunlight, radiation, a strong electric eld, and/or a strong magnetic eld, altitude of more than 2000m above sea level.
If there is any risk of a surge being induced into the power line and/or signal lines due to lightning or other factors, a dedicated lightning arrester should be used as protection for both this
converter and a eld-installed device.
Operating temperature/humidity range: 0 to 50C/5 to 90%RH (no condensation)
3. EXTERNAL WIRING
WARNING
Be sure to turn OFF the power supply before wiring to avoid the risk of electric shock. Use a tester or similar device to ensure that no power is being supplied to a cable to be connected.
Loading...
+ 2 hidden pages