YEALINK T66P Users Manual

Enterprise IP Phone

SIP-T66P

Quick Start Guide

Applies to firmware version 48.0.80.1 or later.

(V80.1)

Packaging Contents

The following items are included in your package. If you find anything missing, contact your system administrator.

Handset Cord

IP Phone

Note: The models displayed on the phone differ from each other. The packaging content "IP Phone" listed above

takes a SIP-T66G IP phone as an example.

Handset

Stand

Ethernet Cable

Wall Mount Bracket

Quick Start Guide

Power Adapter

(Optional)

Assembling the Phone

1. Attach the stand or the wall mount bracket, as shown below:

A

B

2. Connect the handset and optional headset, as shown below:

Desk Mount Method

Wall Mount Method

Wireless Headset Adapter EHS36

Note: The headset, EHS36 should be purchased separately.

The EXT port can be used to connect an expansion module EXP39 or CM69, wireless headset adapter EHS36.
For more information on how to use EXP39, EHS36, refer to EXP39 User Guide, EHS36 User Guide.

2

3. Connect the network and power, as shown below:

PC Connection
(Optional)

A

AC Power Option

B

PoE ( Power over
Ethernet ) Option

Power Adapter
(DC 5V)

PC Connection
(Optional)

IEEE 802.3af compliant
PoE Hub/Switch

Note: If inline power (PoE) is provided, you don’t need to connect the power adapter. Make sure the hub/switch is

PoE-compliant.

Startup

After the IP phone is connected to the network and
supplied with power, it automatically begins the
initialization process. After startup, the phone is ready
for use. You can configure the phone via phone user
interface or web user interface.

3