Yaskawa J1000 MicroDrives, V1000 MicroDrives Catalog

Catalog CA.VJ.01

J1000 and V1000 MicroDrives

Date: 08/01/08

Table of Contents

J1000 Drive (J1000)

Description ................................................................... 3

Standard Drives ................................................................... 4

Dimensions and Data ................................................................... 5

Dimension Drawings ................................................................... 6

Options ................................................................... 8

Page

V1000 Drive (V1000)

Description ................................................................... 15

Standard Drives ................................................................... 16

Dimensions and Data ................................................................... 18

Dimension Drawings ................................................................... 19

Options ................................................................... 22

Technical Training ................................................................... 29

Terms and Conditions ................................................................... 30

Page 1

Data subject to change without notice

CA.VJ.01, 08/01/08

Yaskawa Electric America, Inc.

This catalog may describe trademarked equipment, which is the property of other companies. These trademarks are the property of the registered owner companies and may include the following:

DeviceNet Profibus Modbus

, trademark of ODVA.

, trademark of PROFIBUS International

, trademark of Schneider Automation, Inc.

Other Documents and Manuals are available to support special use or installation of this product. These documents may be provided with the product or upon request. Contact Yaskawa Electric America, Inc. or visit www.yaskawa.com, as required. Documents may include the following:

J1000

TOEPC71060626.... J1000 Quick Start Guide

SIEPC71060631 ..... J1000 Technical Manual

TOBPC73060032.... RS-232C Interface Technical Manual (SI-232/J and SI-232/JC)

TOBPC73060033.... RS-485 MEMOBUS/Modbus Interface Technical Manual (SI-485/J)

TOBPC73060034.... Potentiometer Technical Manual (AI-V3/J)

TOBPC73060035.... LED Operator Installation Manual (JVOP-182)

TOEPC73060020.... DriveWizard Plus Instruction Manual

V1000

TOEPC71060614.... V1000 Quick Start Guide

SIEPC71060618 ..... V1000 Technical Manual

TM.V1000.01 .......... V1000 Cheat Sheet

TOBPC73060023.... Profibus-DP Installation Manual (SI-P3/V)

SIEPC73060023 ..... Profibus-DP Technical Manual (SI-P3/V)

TOBPC73060025.... USB Copy Unit (Y-Stick) Technical Manual (JVOP-181)

TOEPC73060028.... DeviceNet Installation Manual (SI-N3/V)

TOEPC73060020.... DriveWizard Plus Instruction Manual

CA.VJ.01, 08/01/08 Data subject to change without notice Yaskawa Electric America, Inc.

Page 2

Description

1/8-7.5HP

In our pursuit to create drives optimized for variable speed needs in compact applications, the J1000 is the solution. This micro-drive is simple and reliable with Yaskawa quality. Demand continues to increase for compact drives with hassle-free maintenance. Yaskawa drives have earned a reputation for high performance, high functionality, and high quality.

Great Things Come in Small Packages!

J1000

Performance Features

• Ratings: 1/8 to 3 HP at 200-240 VAC 1-Ph. 1/8 to 5 HP at 200-240 VAC 3-Ph. 1/2 to 7.5 HP (ND) at 380-480 VAC 3-Ph.

• Overload Capacity: 150% for 60 sec. (Heavy Duty) 120% for 60 sec. (Normal Duty)

• Control Methods: V/f Control

• DC injection braking, ramp to stop

• Electronic reversing

• Adjustable accel/decel: 0.0 to 6000.0 seconds

• Controlled speed range: 40:1

• Speed Regulation: ± 0.5 to 1% with slip compensation

• Displacement power factor: 0.98

• Output frequency: 0 to 400 Hz

• Frequency resolution:

0.01 Hz with digital reference

0.06 / 60 Hz with analog reference

• Frequency accuracy:

0.01% with digital command

0.5% with analog command

• Volts / hertz ratio: infinitely adjustable pattern

• DC Injection braking: adjustable amplitude, duration, current limited

• Torque boost: full range, auto

• Power loss ride-thru: 0.5 sec.

• Speed search

• Auto restart

• 2 Critical frequency rejection settings

• Slip Compensation

Design Features

• 16-bit microprocessor logic

• Digital keypad operator, 5 digits

• LED status display

• Remote Mount Keypad Capability

• 5 multifunction digital inputs

• 1 multifunction digital output

• Programmable form C output contact for customer use: 1A at 250 VAC or 30 VDC

• 24 VDC control logic compatible with sourcing or sinking outputs (PNP or NPN)

• Carrier frequency: 15 kHz max; swing PWM

• 8 multi-speed settings plus jog speed

• 1 Remote speed reference: 0-10 VDC (20 kohms) or isolated 4-20 mA (250 ohms)

• Signal follower: bias and gain

• Analog monitor output:

• 0-10 VDC proportional to output frequency or output current

• Approximately 140 parameters and monitors

• Cooling fan controlled by drive run/stop

• UL recognized electronic overload

• MTBF: 28 years

• Built-in Dynamic Braking Transistor

• Protected Chassis

• Side-by-Side mounting

• Maintenance monitors

Protective Features

• Current limit, stall prevention during accel, decel, and run

• Motor and drive overload

• Over voltage prevention function

• Instantaneous over current

• Short circuit

• Under voltage

• Heatsink overheat

• Ground fault protection

• Over/under torque

• Short circuit current rating: 30kA rms sym.

Service Conditions

• Ambient service temperature:

-10° to 50°C (+14° to 122°F)

• Ambient storage temperature:

-20° to 60°C (-4° to 140°F)

• Humidity: to 95% non-condensing

• Altitude: to 3300 ft; higher by derating

• Service factor: 1.0

• Input voltage: -15% to +10% 200 to 240 VAC, 380 to 480 VAC

• Input frequency: +/-5%; 50/60 Hz

• Input phase sequence insensitive

Options

• Dynamic Braking resistor (external)

• Remote LED Operator w/ copy function

• Modbus 232/422/485 Communications

• Analog Potentiometer Card

•DriveWizard Plus

• DIN rail mounting kit

• USB Copy Unit (Y-Stick)

Standards

• UL 508C (Power Conversion)

• CSA 22.2 No. 14-95 (Industrial Control Equipment)

• UL, cUL listed; CE marked

• RoHS compliant

• EN 50178 (LVD)

• EN 50081-2, EN 50082-2 (EMC)

• EN 61800-3

• IEC 529, 146

• FCC CFR 47 Part 15 Subpart B (w/ External Filter)

Page 3

Data subject to change without notice

CA.VJ.01, 08/01/08

Yaskawa Electric America, Inc.

J1000

BA0001BAA 1.2 1/8 & 1/4 0.8 1/8

BA0002BAA 1.9 1/4 1.6 1/4

BA0003BAA 3.3 1/2 & 3/4 3.0 1/2

BA0006BAA 6.0 1 5.0 3/4 & 1

BA0010BAA 9.6 2 & 3 8.0 2

2A0001BAA 1.2 1/8 & 1/4 0.8 1/8

2A0002BAA 1.9 1/4 1.6 1/4

2A0004BAA 3.3 1/2 & 3/4 3.0 1/2

2A0006BAA 6.0 1 5.0 3/4 & 1

2A0010BAA 9.6 2 & 3 8.0 2

2A0012BAA 12.0 3 11.0 3

2A0020BAA 19.6 5 17.5 5

4A0001BAA 1.2 1/2 1.2 1/2

4A0002BAA 2.1 3/4 & 1 1.8 3/4

4A0004BAA 4.1 2 3.4 1 & 2

4A0005BAA 5.4 3 4.8 3

4A0007BAA 6.9 4 5.5 3

4A0009BAA 8.8 5 7.2 4

4A0011BAA 11.1 7.5 9.2 5

Heavy Duty

(1)

Rated Output

Current (Amps)

380-480V

3-Phase

200-240V

3-Phase

Nominal HP

(2)

Rated Input

Voltage

Drive Model Number

CIMR-JU

Rated Output

Current (Amps)

Nominal HP

(2)

Normal Duty

(1)

200-240V

1-Phase

Standard Drives

(1) Normal Duty overload current rating is 120% of rated output current for 60 seconds; Heavy Duty overload current rating is 150% of rated

(2) Horsepower rating is based on 230-volt and 460-volt induction-type squirrel-cage NEMA B 4-pole motors as represented in NEC table

CA.VJ.01, 08/01/08 Data subject to change without notice Yaskawa Electric America, Inc.

output current for 60 seconds

430.250 Full-Load Current, Three-Phase Alternating Current Motors

Page 4

Dimensions and Data

Rated

Output

Current

(Amps)

Nominal

Rated

Output

Current

(Amps)

Nominal

HWD H1 W1

BA0001BAA 1.2 1/8 & 1/4 0.8 1/8 5.00 2.68 2.99 4.60 2.20 1.3

BA0002BAA 1.9 1/4 1.6 1/4 5.00 2.68 2.99 4.60 2.20 1.3

BA0003BAA 3.3 1/2 & 3/4 3.0 1/2 5.00 2.68 4.65 4.60 2.20 2.2

BA0006BAA 6.0 1 & 1.5 5.0 3/4 & 1 5.00 4.25 5.41 4.60 3.78 3.5

BA0010BAA 9.6 2 & 3 8.0 2 5.00 4.25 6.06 4.60 3.78 4.0

2A0001BAA 1.2 1/8 & 1/4 0.8 1/8 5.00 2.68 2.99 4.60 2.20 1.3

2A0002BAA 1.9 1/4 1.6 1/4 5.00 2.68 2.99 4.60 2.20 1.3

2A0004BAA 3.5 1/2 & 3/4 3.0 1/2 5.00 2.68 4.25 4.60 2.20 2.0

2A0006BAA 6.0 1 & 1.5 5.0 3/4 & 1 5.00 2.68 5.04 4.60 2.20 2.4

2A0010BAA 9.6 2 & 3 8.0 2 5.00 4.25 5.08 4.60 3.78 3.8

2A0012BAA 12.0 3 11.0 3 5.00 4.25 5.41 4.60 3.78 3.8

2A0020BAA 19.6 5 17.5 5 5.00 5.51 5.63 4.60 5.04 5.3

4A0001BAA 1.2 1/2 1.2 1/2 5.00 4.25 3.19 4.60 3.78 2.2

4A0002BAA 2.1 3/4 & 1 1.8 3/4 5.00 4.25 3.90 4.60 3.78 2.7

4A0004BAA 4.1 2 3.4 1 & 2 5.00 4.25 5.41 4.60 3.78 3.8

4A0005BAA 5.4 3 4.8 3 5.00 4.25 6.06 4.60 3.78 3.8

4A0007BAA 6.9 4 5.5 3 5.00 4.25 6.06 4.60 3.78 3.8

4A0009BAA 8.8 5 7.2 4 5.00 4.25 6.06 4.60 3.78 3.8

4A0011BAA 11.1 7.5 9.2 5 5.00 5.51 5.63 4.60 5.04 5.3

Weight

(lbs.)

(1)

200-240V

3-Phase

380-480V

3-Phase

Heavy Duty

Dimensions (in.)

Normal Duty

Rated

Input

Voltage

Drive Model

Number

CIMR-JU

200-240V

1-Phase

Dimensions (in.)

J1000

Physical

Mounting

(1) This data represents the drive weight only, not shipping weight.

Page 5

Data subject to change without notice

CA.VJ.01, 08/01/08

Yaskawa Electric America, Inc.

J1000

H1H2

2-M4

Voltage Class

Drive Model

CIMR-J

Dimensions (in)

W H D W1 H1 H2 D1 D2 t1

Weight

(lb.)

Single-Phase

200 V Class

BA0001B 2.7 5.0 3.0 2.2 4.6 0.2 0.3 2.7 0.1 1.3

BA0002B 2.7 5.0 3.0 2.2 4.6 0.2 0.3 2.7 0.1 1.3

BA0003B 2.7 5.0 4.6 2.2 4.6 0.2 1.5 4.3 0.2 2.2

Three-Phase

200 V Class

2A0001B 2.7 5.0 3.0 2.2 4.6 0.2 0.3 2.7 0.1 1.3

2A0002B 2.7 5.0 3.0 2.2 4.6 0.2 0.3 2.7 0.1 1.3

2A0004B 2.7 5.0 4.3 2.2 4.6 0.2 1.5 3.9 0.2 2.0

2A0006B 2.7 5.0 5.0 2.2 4.6 0.2 2.3 4.7 0.2 2.4

Dimension Drawing

DD.J1000.01 Protected Chassis

CA.VJ.01, 08/01/08 Data subject to change without notice Yaskawa Electric America, Inc.

Page 6

Dimension Drawing

4-M4

H2 H1

Voltage Class

Drive Model

CIMR-J

Dimensions (in)

W H D W1 H1 H2 D1 D2 t1

Weight

(lb.)

Single-Phase

200 V Class

BA0006B 4.3 5.0 5.4 3.8 4.6 0.2 2.3 5.1 0.2 3.8

BA0010B 4.3 5.0 6.1 3.8 4.6 0.2 2.3 5.7 0.2 4.0

Three-Phase

200 V Class

2A0010B 4.3 5.0 5.1 3.8 4.6 0.2 2.3 4.7 0.2 3.8

2A0012B 4.3 5.0 5.4 3.8 4.6 0.2 2.3 5.1 0.2 3.8

2A0020B 5.5 5.0 5.6 5.0 4.6 0.2 2.6 5.3 0.2 5.3

Three-Phase

400 V Class

4A0001B 4.3 5.0 3.2 3.8 4.6 0.2 0.4 2.9 0.2 2.2

4A0002B 4.3 5.0 3.9 3.8 4.6 0.2 1.1 3.6 0.2 2.7

4A0004B 4.3 5.0 5.4 3.8 4.6 0.2 2.3 5.1 0.2 3.8

4A0005B 4.3 5.0 6.1 3.8 4.6 0.2 2.3 5.7 0.2 3.8

4A0007B 4.3 5.0 6.1 3.8 4.6 0.2 2.3 5.7 0.2 3.8

4A0009B 4.3 5.0 6.1 3.8 4.6 0.2 2.3 5.7 0.2 3.8

4A0011B 5.5 5.0 5.6 5.0 4.6 0.2 2.6 5.3 0.2 5.3

DD.J1000.02

Protected Chassis

J1000

Page 7

CA.VJ.01, 08/01/08

Data subject to change without notice

Yaskawa Electric America, Inc.

Options

HLW HLW

BA0001BAA 1.2 1/8 & 1/4 0015

BA0002BAA 1.9 1/4 0021

BA0003BAA 3.3 1/2 & 3/4 0020 0021

BA0006BAA 6.0 1

0027 0028

BA0010BAA 9.6 2 & 3

0027

8.0 8.0 6.0 0028

8.0 8.0 6.0

2A0001BAA 1.2

1/8 & 1/4 0015

2A0002BAA 1.9 1/4 0021

2A0004BAA 3.5 1/2 & 3/4 0020 0021

2A0006BAA 6.0 1

0027 0028

2A0010BAA 9.6 2 & 3

0027

0028

2A0012BAA 12.0 3

0032

0033

2A0020BAA 19.6 5

0036 8.0 8.0 6.0

0037

8.0 8.0 6.0

4A0001BAA 1.2 1/2 0015

4A0002BAA 2.1 3/4 & 1 0015

4A0004BAA 4.1 2

0021

0023

4A0005BAA 5.4 3

0028

0029

4A0007BAA 6.9 4

0033

0034

8.0 8.0 6.0

4A0009BAA 8.8 5

0037

0038

13.0 13.0 13.0

4A0011BAA

11.1 7.5

0037 8.0 8.0 8.0

0038

13.0 13.0 13.0

8.0 8.0 6.0

0016

8.0 8.0

380-480V

3-Phase

8.0 8.0 6.0

8.0 6.0

6.0

8.0 8.0 6.0 8.0

200-240V

3-Phase

0020

8.0 8.0 6.0 8.0

8.0 6.0

8.0 8.0 6.0 8.0 8.0 6.0

8.0 8.0 6.0 8.0

200-240V

1-Phase

0020

Rated

Input

Voltage

Drive Model

Number

CIMR-JU

Rated

Output

Current

(Amps)

Nominal HP

3% Enclosed Reactor 5% Enclosed Reactor

Part

Number

05P00620-

Dimensions (in.)

Part

Number

05P00620-

Dimensions (in.)

OPT

Reactor, 3% and 5% Impedance - may be used on either the input or output of a drive to reduce the effect of load or line side

transients on the drive. The three-phase reactors are available loose in a separate NEMA 1 enclosure.

J1000 Drive

CA.VJ.01, 08/01/08 Data subject to change without notice Yaskawa Electric America, Inc.

Page 8

Options

BA0001BAA 1.2 1/8 & 1/4

BA0002BAA 1.9 1/4

BA0003BAA 3.3 1/2 & 3/4 FS22800-9-A 9

BA0006BAA 6.0 1

FS22800-16-A 16

BA0010BAA 9.6 2 & 3

FS22800-26-A 26

2A0001BAA 1.2

1/8 & 1/4

2A0002BAA 1.9 1/4

2A0004BAA 3.5 1/2 & 3/4

2A0006BAA 6.0 1

2A0010BAA 9.6 2 & 3

2A0012BAA 12.0 3

2A0020BAA 19.6 5

4A0001BAA 1.2 1/2

4A0002BAA 2.1 3/4 & 1

4A0004BAA 4.1 2

FS22801-6-A 6

4A0005BAA 5.4 3

FS22801-12-A 12

4A0007BAA 6.9 4

4A0009BAA 8.8 5

4A0011BAA

11.1 7.5

FS22801-16-A 16

FS22801-12-A

380-480V

3-Phase

FS22801-3-A

200-240V

3-Phase

200-240V

1-Phase

FS22800-5-A

N/A N/A

Part Number

Rated Current

(A)

C3 Filter Kit

Rated

Input Voltage

Drive Model Number

CIMR-JU

Rated Output

Current (Amps)

Nominal HP

J1000 Drive

C3 Filters (Conducted Interference Voltage Limits) - may be used on the input of a drive to attenuate possible drive-

generated noise. An input filter with proper shielding, routing and grounding between itself and the drive is designed to reduce line-conducted noise levels within the limits of EN61800-3 Category C3 - 1<= 100A (second environment for industrial lowvoltage supply network), when the drive’s output conductors are properly routed and shielded in grounded steel conduit all the way to the motor. Filters should always be mounted as close to the drive as possible. The filters in combination with the drive meet UL and CE.

OPT

Note: Kit contains filter, cover, and mounting hardware.

Page 9

Data subject to change without notice

CA.VJ.01, 08/01/08

Yaskawa Electric America, Inc.

+ 25 hidden pages