Yamaha DTXHP570, DTXHP580, DTXHP587 User Manual

SETUP GUIDE - yDTX502 SERIES HYBRID PACKS

Model:!DTXHP587 / DTXHP580 / DTXHP570:!

1.! Attach the module, triggers and pad(s) to your acoustic drum set.!

! ! a.! Attach the DTX502 Module to a hi-hat/cymbal stand using the CSAT924A.! ! ! b.! Attach DT20 triggers to kick and snare away from strike-zone with strong tape.! ! ! c.! Attach the electronic drum pad(s) to your kit using CSAT924A and CL940.!

2.! Connect the triggers/pads to DTX502 module using supplied cables.!

! ! a.! Connect the DT20 on the bass drum to the KICK/8 trigger input.! ! ! b.! Connect the DT20 on the snare drum to the SNARE trigger input.! ! ! c.! Connect the TP70 pad to the TOM3/12 input* (for DTXHP570/HP587).! ! ! d.! Connect the XP80 pad to the RIDE input* (for DTXHP580/HP587).!

3a.! Complete the Initial Setup process and create a custom Trigger Setup.*!

! ! a.! When turning on the DTX502 module for the ﬁrst time, you are required to:! ! ! ! i)! Select your kit. For Hybrid Packs select “DrumTrig” and press [ENTER].! ! ! ! ii)! Select the Auto Power-off time to desired setting and press [ENTER].!

! !

*Or other compatible input. The Initial Setup is explained on page 13 of the DTX502 owner manual, and Trigger Setup on page 66. You can also create a Hybrid Setup using the “DTX502 Touch” v2.0 app for iOS devices when connected to the DTX502 via USB.!

For more information and video tutorials visit www.YamahaDTX.com

Setup

Setting Up for Sound

devices such as powered speakers, ensure that the volume on those devices is turned down fully.

[SAVE/ENTER] button.

2. Using the Data Dial, select how long the DTX502 should

wait before turning off automatically, and then press the [SAVE/ENTER] button.

 You r d ru m ki t’s m o de l nu mb e r

When you specify the model number, the DTX502 will auto- matically optimize the trigger output levels for all of your pads.

 Auto Power-Off time

The Auto Power-Off function automatically turns off the DTX502 after a certain period of inactivity. This helps to con- serve energy should you forget to turn it off yourself.

Select your ki

DtX562K

Settings

off (i.e., Auto Power-Off function disabled), 5min, 10min, 15min, 30min, 60min, and 120min

•Any unsaved changes to parameters will be lost when the drum module is turned off by the Auto Power-Off function. Remember to store modified settings regu- larly.

•In certain modes of operation, the Auto Power-Off func- tion will not turn off the drum module when the set time has elapsed. We recommend, therefore, that you always turn off the drum module manually when you are finished using it.

•If you expect your DTX502 to be inactive for a certain length of time while connected to other audio equip- ment, we recommend that you turn the volume on the other equipment fully down. Alternatively, you can dis- able the Auto Power-Off function to ensure that the drum module stays on.

NOTE

•Settings for the Auto Power-Off function do not represent exact times and there may be some variation.

•By default, the Auto Power-Off time is set to 30 minutes.

•You can change the Auto Power-Off setting at any time after completing Initial Setup. For details, see th e d esc ription of the Auto Power-Off page from Menu Mode (page 75).

Auto Power Off timer= 30min

NOTICE

Setup

Setting Up for Sound

wait before turning off automatically, and then press the [SAVE/ENTER] button.

Auto Power Off timer= 30min

DrumTrig

10min

SETUP GUIDE - yDTX502 SERIES HYBRID PACKS

3b.!Select the Pad Type(s) for the drum pad(s) in your Hybrid Pack.!

! ! a.! Press [SHIFT] + [SAVE/ENTER] to access the MENU.! ! ! b.! Use the Data Dial to select menu 6:Trigger.! !

! ! !

! ! c.! Cursor right [>] to TRG3 page, and strike the drum pad(s) to select it.! ! ! d.! For the TP70 (in Tom3 input) select TM:TP70S/70.! ! ! ! For the XP80 (in Ride input) select TM:XP80 (tom) or SN:XP80 (snare).! !

!!! ! ! e.! SAVE the User Trigger Setup into memory by pressing [SAVE/ENTER]. Select ! ! ! ! a destination user setup (15-30) with the Data Dial. To rename the setup, move ! ! ! ! the cursor with the [<][>] buttons and turn the Data Dial to change the character. ! !!!! !

Press [SAVE/ENTER] and you will be asked conﬁrm.!

Press [SAVE/ENTER] again to execute the operation. Press [KIT] and start playing!!

You may need to adjust the Gain setting for the triggers as the performance depends on the acoustic drum surface and trigger placement. The trigger setup you just created will remain active when you startup the DTX502. You can create up to 16 user trigger setups for all kinds of Hybrid applications that can be recalled at anytime. Use the Trigger Setup Link to automatically ‘link’ a trigger setup with any Kit. Always perform a “shutdown’ when turning off power to the DTX502.

For more information and video tutorials visit www.YamahaDTX.com

 Storing your settings

If you change a parameter setting in the KitVoice area, the Kit- Common area, the KitJob area, or on one of pages TRG2 to TRG12 from the Trigger area, you will need to store the new setting in the drum module’s internal memory as described below.

NOTE

If you switch to another kit or trigger setup or turn off the drum module without storing your new settings, the parameters in question will revert to their previously stored settings.

ENTER] button to access Menu Mode.

ter you wish to set.

MENU 01:Mixer ‚

Hold

MENU 02:KitVoice ‚

 Storing your settings

 Procedure

As an example, the following describes how to store modified trigger settings. Note that trigger settings are stored as part of a User trigger setup. Meanwhile, settings from the KitVoice, KitCommon, and KitJob areas are stored as part of one of the User kits, which are numbered 51 to 100 (page 25).

1. After changing trigger parameter settings, press the

[SAVE/ENTER] button. The page for storing trigger setup data will be displayed.

NOTE

If you switch to another kit or trigger setup or turn off the drum module without storing your new settings, the parameters in question will revert to their previously stored settings.

MENU 06: Trigger

>TRG3 Ride 00%

SN:XP80

>TRG3 Tom3 00%

TM:TP70S/70

TRG save to 15 :[DrumTrig]

TRG save to 16 :[MyHybrid]

ENTER] button to access Menu Mode.

ter you wish to set.

MENU 01:Mixer ‚

Hold

MENU 02:KitVoice ‚

 Storing your settings

 Procedure

1. After changing trigger parameter settings, press the

[SAVE/ENTER] button. The page for storing trigger setup data will be displayed.

NOTE

If you switch to another kit or trigger setup or turn off the drum module without storing your new settings, the parameters in question will revert to their previously stored settings.

TRG save to 16

Are you sure?

Basic Techniques

Building Your Own Unique Kits

KIt2 Snare ”S01:MapleCustm‚

NOTE

As an alternative to selecting a pad by striking it, you can change the current selection by pressing the [<]/[>] but- tons with the [SHIFT] button held down.

KIt2 Snare