Xerox DocuColor 2240-1539 User Manual

©

Copyright 2002 by Xerox Corporation. All Rights Reserved.

Copyright protection claimed includes all forms and matters of copyrighted material and information now allowed by statutory or judicial law or
hereinafter granted, including without limitation, material generated from the software programs that are displayed on the screen such as styles,
templates, icons, screen displays, looks, etc.

Internet Explorer is a copyright protected program of Microsoft Corporation. Novell® and NetWare® are registered trademarks of Novell, Inc.
Netscape® is a registered trademark of Netscape Communications Corporation. Adobe® and PostScript® are registered trademarks of Adobe
Systems Incorporated. TIFF is a copyright of Adobe Systems Incorporated. AppleTalk, LaserWriter, and Macintosh are trademarks of Apple
Computer, Inc. PCL® and HP-GL® are registered trademarks of Hewlett-Packard Corporation. WinZip® is a registered trademark of Nico Mak
Computing, Incorporated. ACITS LPR Printing for Windows 95 is a copyright of the University of Texas at Austin.

®

Xerox

, The Document Company®, The stylized X, and all Xerox product names and product numbers mentioned in this publication are
trademarks of XEROX CORPORATION. Other company brands and product names may be trademarks or registered trademarks of the
respective companies and are also acknowledged.

Printed in the U.S.A.

Electrical Safety

Safety Notices

The Xerox DocuColor 2240/1632 and the recommended supplies
have been designed and tested to meet strict safety requirements.
Attention to the following notes will ensure the continued safe
operation of your printer/copier.

• Use only the power cord supplied with this equipment.

• Plug the power cord directly into a correctly grounded
electrical outlet. Do not use an extension cord. If you do not
know whether or not an outlet is grounded, consult a qualified
electrician.

• Do not use a ground adapter plug to connect this equipment to
an electrical outlet that lacks a ground connection terminal.

WARNING: You may get a severe electrical shock if the
outlet is not correctly grounded.

• Do not place the printer/copier where people may step on or
trip on the power cord. Do not place objects on the power cord.

• Do not override or disable electrical or mechanical interlocks.

• Do not obstruct the ventilation openings. These openings are
provided to prevent overheating of the machine.

WARNING: Never push objects of any kind into slots or
openings on this equipment. Making a contact with a voltage
point or shorting out a part could result in fire or electrical
shock.

i

i

S

AFETY NOTICES

Disconnect Device

• If any of the following conditions occur, immediately switch off
the power to the machine and disconnect the power cord from
the electrical outlet. Call an authorized Xerox service
representative to correct the problem.

– The machine emits unusual noises or odors.

– The power cord is damaged or frayed.

– A wall panel circuit breaker, fuse, or other safety device

has been tripped.

– Liquid is spilled into the press.

– The machine is exposed to water.

– Any part of the machine is damaged.

The power cable is the disconnect device for this equipment. It is
attached to the back of the machine as a plug-in device. To
remove all electrical power from the machine, disconnect the
power cable from the electrical outlet.

Laser Safety

Use of controls, adjustments, or procedures other than those
specified in this documentation may result in a hazardous
exposure to laser radiation. This equipment complies with
international safety standards. With specific regard to laser safety,
the equipment complies with performance standards for laser
products set by government, national, and international agencies
as a Class 1 laser product. It does not emit hazardous light, as the
beam is totally enclosed during all phases of customer operation
and maintenance.

ii

Maintenance Safety

S

AFETY NOTICES

• Do not attempt any maintenance procedure that is not
specifically described in the documentation that is supplied
with your press.

• Do not use aerosol cleaners. The use of supplies that are not
approved may cause poor performance of the press, and
could create a dangerous condition.

• Use the supplies and cleaning materials only as directed in
this manual. Keep all of these materials out of the reach of
children.

• Do not remove the covers or guards that are fastened with
screws. There are no parts behind these covers that you can
maintain or service.

Do not perform any maintenance procedures unless you have
been trained to do them by a Xerox representative, or unless a
procedure is specifically described in one of the manuals included
with your press.

Operational Safety

Your Xerox equipment and supplies were designed and tested to
meet strict safety requirements. These include safety agency
examination, approval, and compliance with established
environmental standards.

Your attention to the following safety guidelines will help ensure
the continued safe operation of your digital press:

• Use the materials and supplies specifically designed for your
digital press. The use of unsuitable materials may result in
poor performance of the machine and possibly a hazardous
situation.

• Follow all warnings and instructions that are marked on or
supplied with the machine.

• Place the machine in a room that provides adequate space for
ventilation and servicing.

• Place the machine on a level, solid surface (not on a thick pile
carpet) that has adequate strength to support the weight of the
machine.

iii