Whirlpool WF143CM1, WF143SM1, WF143FM1, WF163CM1, WF183CM1 Use & Care Manual
...
HIGH VELOCITY FAN WITH
Meijer.com
3-SPEED INTERNAL
OSCILLATION
Use & Care Guide
For questions about features, operation/performance, parts
or visit our website at... www.whirlpoolairpurifiers.com
or service, call: 1-866-990-7365.
VENTILADOR DE ALTA
VELOCIDAD CON
OSCILACIÓN INTERNA DE
3VELOCIDADES
Manual de uso y cuidado
Si tiene preguntas respecto a las características, funcionamiento,
o visite nuestro sitio de internet en... www.whirlpoolairpurifiers.com
rendimiento, partes o servicio técnico,
llame al: 1-866-990-7365.
WF14-18SFCHV
VENTILATEUR GRANDE
VITESSE AVEC
OSCILLATION INTERNE À
3VITESSES
Guide d’utilisation et d’entretien
Au Canada, pour assistance, installation ou service,
composez le : 1-866-990-7365.
ou visitez notre site web à... www.whirlpoolairpurifiers.com
Table of Contents/Índice/Table des matières ...... 2
Models/Modelos/Modèles : WF143CM1,
WF143FM1, WF143SM1, WF163CM1,
WF183CM1, WF183FM1, WF183SM1
TABLE OF CONTENTS
Meijer.com
FAN SAFETY...................................................................................2
ELECTRICAL REQUIREMENTS....................................................3
Electrical Connection ...................................................................3
Fused Plug and Cord Information................................................3
FAN ASSEMBLY INSTRUCTIONS................................................4
Column Assembly Instructions....................................................4
Fan Head Assembly.....................................................................4
Convert Stand Fan to Floor Fan ..................................................4
ÍNDICE
SEGURIDAD DEL VENTILADOR...................................................7
REQUISITOS ELÉCTRICOS ..........................................................7
Conexión eléctrica........................................................................7
Información acerca del enchufe con fusible y el cable ...............8
INSTRUCCIONES DE ENSAMBLAJE DEL VENTILADOR..........9
Instrucciones de ensamblaje de la columna ...............................9
Ensamblaje de la cabeza del ventilador ......................................9
Cómo convertir el ventilador de pie en un ventilador de piso.....9
Ventilador de piso ........................................................................9
TABLE DES MATIÈRES
SÉCURITÉ DU VENTILATEUR ....................................................12
SPÉCIFICATIONS ÉLECTRIQUES..............................................12
Raccordement électrique...........................................................12
Informations sur la fiche avec fusible
et le cordon d'alimentation ........................................................13
INSTRUCTIONS D’ASSEMBLAGE DU VENTILATEUR.............14
Instructions d'assemblage de la colonne..................................14
Tête du ventilateur......................................................................14
Conversion du ventilateur sur pied en ventilateur au sol ..........14
Floor Fan.......................................................................................4
FAN OPERATING INSTRUCTIONS...............................................4
Adjust Airflow................................................................................4
FAN CARE.......................................................................................5
Cleaning........................................................................................5
ASSISTANCE OR SERVICE...........................................................5
In the U.S.A. and Canada.............................................................5
WARRANTY ....................................................................................6
INSTRUCCIONES PARA EL FUNCIONAMIENTO DEL
VENTILADOR..................................................................................9
Regule el flujo de aire...................................................................9
CUIDADO DEL VENTILADOR .....................................................10
Limpieza .....................................................................................10
AYUDA O SERVICIO TÉCNICO...................................................10
En los EE.UU. y Canadá.............................................................10
GARANTÍA.....................................................................................11
Ventilateur au sol........................................................................14
INSTRUCTIONS D’ASSEMBLAGE DU VENTILATEUR.............14
Réglage du débit d’air................................................................14
ENTRETIEN DU VENTILATEUR..................................................15
Nettoyage ...................................................................................15
ASSISTANCE OU SERVICE.........................................................15
Aux États-Unis et au Canada.....................................................15
GARANTIE.....................................................................................16
FAN SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
You can be killed or seriously injured if you don't immediately
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
follow instructions.
You
can be killed or seriously injured if you don't
instructions.
follow
2
IMPORTANT SAFETY INSTRUCTIONS
Meijer.com
WARNING: To reduce the risk of fire, electrical shock or injury when using your fan, follow these basic precautions:
Do not use fan if any parts are damaged or missing.
Do not expose to water or rain.
Do not use this fan with any solid state speed control
device.
Never insert finger or any other objects through the grille
guard when fan is in operations.
Unplug power cord when moving from one location to
another.
Unplug power cord when removing grille for cleaning.
Be sure fan is on a stable, flat surface when in operation.
Do not use fan in window; rain and moisture may create
electrical hazard.
Do not alter the fan's assembly in any way.
Be sure front and rear grille screws are tightened before
operation.
SAVE THESE INSTRUCTIONS
ELECTRICAL REQUIREMENTS
Electrical Connection
■ To properly install your fan, plug the 2 prong power cord into
a grounded 120V outlet.
■ This appliance has a polarized plug (one blade is wider than
the other). To reduce the risk of electric shock, this plug is
intended to fit in a polarized outlet only one way.
Fused Plug and Cord Information
WARNING
Electrical Shock Hazard and Fire Hazard
Always unplug this product before installing or
replacing fuses.
Do not operate any fan with a damaged cord or plug.
Discard fan or return to an authorized service facility
for examination and/or repair.
Do not run cord under carpeting.
Do not cover cord with throw rugs, runners, or similar
coverings.
Do not route cord under furniture or appliances.
Arrange cord away from traffic area and where it will
not be tripped over.
Failure to follow these instructions could result in
shock or fire hazard.
NOTES:
■ This product employs overload protection (fuse). A blown
fuse indicates an overloaded or short-circuit situation. If the
fuse blows, unplug the product from the outlet. Replace the
fuse as per the user servicing instructions below (follow the
product marking for proper fuse rating) and check the
product. If the replacement fuse blows, a short circuit may be
present and the product should be discarded or returned to
an authorized service facility for examination and/or repair.
If the plug does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician. Do not
attempt to defeat this safety feature.
■ This fan is rated at 120 VAC, 60 Hz, 45 W.
■ If your fan loses power and you suspect that the fuse on your
fan has blown, replace the fuse. See the following steps for
replacing the fuse.
1. Disconnect power by unplugging the fan. Grasp the plug and
remove from the receptacle or other outlet device.
NOTE: Do not unplug by pulling on the cord.
2. Slide open the fuse door on the side of the plug. Be sure the
fuse door is open completely and the blown fuse is fully
visible.
A
placeholder
A. Fuse
B. Fuse door
3. Remove the blown fuse.
4. Snap the 5-amp, 125-volt replacement fuse into place.
5. Fully close the fuse door by sliding back into place.
6. Discard the blown fuse.
7. The fan should now be ready for normal use.
IMPORTANT: Risk of fire. Do not replace attachment plug.
Contains a safety device (fuse, AFCI, SCDI) that should not be
removed. Discard product if the attachment plug is damaged.
Failure to follow these instructions can result in death or fire.
B
3
Stand and Floor Fan Assembly
Meijer.com
A
B
C
FAN ASSEMBLY INSTRUCTIONS
Column Assembly Instructions
1. Using the 4 screws (F), join the tubing part of the fan stand to
the fan base (H).
2. Loosen the height-adjustment screw (D).
3. Slide the base cover (E) over the tubing as shown.
4. Tighten the height-adjustment screw securely.
I
IMPORTANT: The height-adjustment screw must be fully
tightened before attaching the fan head to the fan stand.
Fan Head Assembly
1. Attach the tube to the fan head arc support (A).
2. Attach the fan head arc support and tube assembly to the fan
stand (B).
3. Insert the hand screw and tighten securely.
D
E
G
A. Fan head arc support and tube assembly
B. Fan head assembly parts
C. Fan stand assembly parts
D. Height-adjustment screw
E. Base cover
F
H
FAN OPERATING INSTRUCTIONS
Adjust Airflow
Back of the Fan Head
A
F. Screws (4)
G. Floor fan assembly
parts (some models)
H.Fan base
I. Floor fan—no
assembly required
B
Convert Stand Fan to Floor Fan
1. Using the 4 screws (F), attach the floor fan assembly parts (G)
to the fan base (H).
2. Follow the directions in “Fan Head Assembly” to attach the
fan head assembly.
Floor Fan
NOTE: There is no assembly required for the floor fan.
Adjusting Airflow
1. To adjust the fan height, loosen the hand screw and raise or
lower the fan.
2. Retighten hand screw at desired height.
C
3. Move the fan head up or down, right or left, to the desired
position.
A. Fan speeds—Oscillation on
B. Fan speed knob
C. Fan speeds—Oscillation off
4
Oscillation
Rotate the fan speed knob to the Oscillation (left) side of the
control. Select 0 (Off), 1 (Low), 2 (Medium) or 3 (High) fan speed.
Speed Control—Oscillation Off
Rotate the fan speed knob to the Oscillation Off (right) side of the
control. Select 0 (Off), 1 (Low), 2 (Medium) or 3 (High) fan speed.
FAN CARE
Meijer.com
Cleaning
■ Use a soft, damp cloth to clean all surfaces. Wipe dry with a
soft, dry cloth.
■ Do not use a cleaning solution that is damaging to paints or
plastics.
■ Do not bend the blades.
■ The motor bearings are permanently sealed and do not
require additional lubrication.
ASSISTANCE OR SERVICE
Before calling for assistance or service, please check
“Troubleshooting.” It may save you the cost of a service call. If
you still need help, follow the instructions below.
In the U.S.A. and Canada
Call the Customer Service Center toll free: 1-866-990-7365.
Our consultants provide assistance with:
■ Features and specifications on our full line of appliances.
■ Installation information.
■ Use and maintenance procedures.
■ Accessory and repair parts sales.
■ Specialized customer assistance (Spanish speaking, hearing
impaired, limited vision, etc.).
■ Referrals to local dealers, repair parts distributors and service
companies. Designated service technicians are trained to
fulfill the product warranty and provide after-warranty service,
anywhere in the United States and Canada.
When calling, please know the purchase date and the complete
model and serial number of your appliance. This information will
help us to better respond to your request.
To locate the designated service company in your area, you
can also look in your telephone directory Yellow Pages.
For further assistance
If you need further assistance, you can write to Master Brands
HK Limited with any questions or concerns at:
Master Brands HK Limited
c/o CCRG Teleservices
4240 Ridge Lea Road, Suite 29
Amherst, NY 14226
Please include a daytime phone number in your correspondence.
5
Loading...