Duet Steam WFW9600TW02
® _®
steam vapeur
FRONT.LOADING
AUTOMATICWASHER
For questions about features, operation/performance,
parts, accessories or service call: 1-800-253-1301
In Canada, call: 1-800-807-6777
or visit our website at www,whirlpool,com or www,whirlpool.ca
LAVEUSE
AUTOMATIQUEA
CHARGEMENTFRONTAL
Certified to Sanitize
Certifie pour aseptiser
461970240802 / W10158198B
Au Canada, pour assistance, installation ou service, composez le :
ou visitez notre site Internet h www,whirlpool.ca
Table of Contents/Table des matieres .................. 2
Para obtener acceso al manual de uso y cuidado en espa_ol, o
para obtener informaci6n adicional acerca de su producto, visite:
www.whirlpool.com.
Tenga listo su nOmero de modelo completo. Podra eneontrar el
nOmero de modelo y de serie en la etiqueta ubicada debajo de la
tapa de la lavadora.
Designed to use only HE High _ _'_-.,dIl_
Efficiency Detergent
Concue pour I'utilisation d'un
d&tergent haute efficacite ,,R
seulement _vVOO [ M A ]K.K ....
1-800-807-6777
@
TABLEOFCONTENTS
TABLEDESMATI] RES
WASHER SAFETY ......................................................................... 3
iNSTALLATiON REQUIREMENTS ................................................ 4
Tools and Parts ............................................................................ 4
Options ......................................................................................... 4
Location Requirements ................................................................ 5
Drain System ................................................................................ 6
Electrical Requirements ............................................................... 7
iNSTALLATiON iNSTRUCTiONS .................................................. 8
Remove Transport System .......................................................... 8
Connect the inlet Hoses ............................................................... 8
Route the Drain Hose ................................................................... 9
Secure the Drain Hose ................................................................. 9
Level the Washer ........................................................................ 10
Complete Installation ................................................................. 10
FEATURES AND BENEFITS ........................................................ 11
WASHER USE ............................................................................... 12
Starting Your Washer ................................................................. 12
Using the Proper Detergent ....................................................... 12
Using the Dispenser ................................................................... 13
Pausing or Restarting ................................................................. 14
Changing Cycles, Options, and Modifiers ................................. 14
Status Lights .............................................................................. 15
Cycles ......................................................................................... 16
Normal Washer Sounds ............................................................. 17
Options ....................................................................................... 17
Modifiers ..................................................................................... 18
Laundry Guide ............................................................................ 19
LAUNDRY TIPS ............................................................................ 20
Loading ....................................................................................... 20
WASHER CARE ............................................................................ 21
Cleaning Your Washer ............................................................... 21
Water inlet Hoses ....................................................................... 22
Vacation, Storage, and Moving Care ......................................... 22
TROUBLESHOOTING .................................................................. 23
ASSISTANCE OR SERVICE ......................................................... 26
in the U.S.A ................................................................................ 26
in Canada ................................................................................... 26
Accessories ................................................................................ 26
WAR RANTY .................................................................................. 27
S_eCURITE DE LA LAVEUSE ........................................................ 29
EXIGENCES D'INSTALLATION ................................................... 30
Outillage et pieces ...................................................................... 30
Options ....................................................................................... 30
Exigences d'emplacement ......................................................... 31
Systeme de vidange ................................................................... 32
Specifications _lectriques .......................................................... 33
iNSTRUCTiONS D'INSTALLATION ............................................. 34
€:limination des accessoires de transport.................................. 34
Raccordement des tuyaux d'alimentation ................................. 34
Acheminement du tuyau de vidange ......................................... 35
Immobilisation du tuyau de vidange .......................................... 35
R_glage de I'aplomb de la laveuse ............................................ 36
Achever I'installation .................................................................. 36
CARACTERISTIQUES ET AVANTAGES ..................................... 37
UTILISATION DE LA LAVEUSE ................................................... 38
Mise en marche de la laveuse.................................................... 38
Utilisation du d_tergent appropri_ ............................................. 38
Utilisation du distributeur ........................................................... 39
Pause ou remise en marche ....................................................... 41
Changement des programmes, options et modificateurs .........41
T_moins lumineux ...................................................................... 41
Programmes ............................................................................... 42
Sons normaux _mis par la laveuse ............................................ 44
Options ....................................................................................... 44
Modificateurs .............................................................................. 45
Guide de lessivage ..................................................................... 46
CONSEILS DE LESSIVAGE .......................................................... 47
Chargement ................................................................................ 47
ENTRETIEN DE LA LAVEUSE ..................................................... 48
Nettoyage de la laveuse ............................................................. 48
Tuyaux d'arriv_e d'eau ............................................................... 49
Precautions _,prendre avant les vacances,
un entreposage ou un d_m_nagement ...................................... 49
DEPAN NAG E................................................................................. 50
ASSISTANCE OU SERVICE ......................................................... 54
Aux €:tats-Unis ............................................................................ 54
Au Canada .................................................................................. 54
Accessoires ................................................................................ 54
GARANTIE ..................................................................................... 55
2
WASHERSAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions,
including the following:
[] Read all instructions before using the washer.
[] Do not wash articles that have been previously cleaned
in, washed in, soaked in, or spotted with gasoline,
dry-cleaning solvents, other flammable, or explosive
substances as they give off vapors that could ignite or
explode.
[] Do not add gasoline, dry-cleaning solvents, or other
flammable, or explosive substances to the wash water.
These substances give off vapors that could ignite or
explode.
[] Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been used
for 2 weeks or more. HYDROGEN GAS IS
EXPLOSIVE. Ifthe hot water system has not been
used for such a period, before using the washing
machine, turn on all hot water faucets and let the water
flow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is
flammable, do not smoke or use an open flame during
this time.
SAVE THESE INSTRUCTIONS
Do not allow children to play on or in the washer. Close
supervision of children is necessary when the washer is used
near children.
Before the washer is removed from service or discarded,
remove the door or lid.
mDo not reach into the washer if the drum, tub or agitator is
moving.
mDo not install or store the washer where it will be exposed to
the weather.
mDo not tamper with controls.
mDo not repair or replace any part of the washer or attempt any
servicing unless specifically recommended in this manual or in
published user-repair instructions that you understand and
have the skills to carry out.
mSee "Electrical Requirements" for grounding instructions.
INSTALLATIONREQUIREMENTS
Gather the required tools and parts before starting installation.
The parts supplied are in the washer drum.
Tools needed for connecting the water inlet hoses
[] Pliers (that open to 1%6" [39.5 ram])
[] Flashlight (optional)
Tools needed for installation
[] Open end wrenches 17 mm and 13 mm
[] Level
[] Wood block
[] Ruler or measuring tape
Parts supplied:
A B
CC>
A. Drain hose form
B. Inlet hose (2)
C. Inlet hose washer (4)
Alternate Parts
Your installation may require additional parts. If you are interested
in purchasing one of the items listed here, call the toll-free
number on the cover or in the "Assistance or Service" section.
if You Have You Will Need to Buy
Laundry tub or
standpipe taller
than 96" (2.4 m)
Overhead sewer
Floor drain
Drain hose too 4 ft (1.2 m) drain hose extension kit,
short Part Number 285863
Water faucets 2 longer water fill hoses:
beyond reach of fill 6 ft (1.8 m) Part Number 76314,
hoses 10 ft (3.0 m) Part Number 350008
Sump pump system (if not already
available)
Standard 20 gal. (76 L), 30" (76.2 cm) tall
drain tub or utility sink and sump pump
(available from local plumbing suppliers)
Siphon break, Part Number 285834;
additional drain hose
Part Number 8318155; and connector kit,
Part Number 285835
D. Transportbolt hole plug (4)
E.Beadedstrap
Pedestal
You have the option of purchasing pedestals of different heights
separately for this washer. You may select a 10" (25.4 cm) or a
15.5" (39.4 cm) pedestal. These pedestals will add to the total
height of the washer for a total height of approximately
48" (121.9 cm) or 53.5" (135.9 cm), respectively.
A B
A. 10" (25.4cm)pedestal
B. 15.5" (39.4 cm) pedestal
To order, call the dealer from whom you purchased your washer
or refer to the "Assistance or Service" section.
Pedestal Color Part Number
Height
10" (25.4 cm) White WHP1000SQ
10" (25.4 cm) Black WHP1000SB
10" (25.4 cm) Diamond Dust (Silver) WHP1000SU
15.5" (39.4 cm) White XHP1550VW
15.5" (39.4 cm) Black XHP1550VB
15.5" (39.4 cm) Diamond Dust (Silver) XHP1550VU
15.5" (39.4 cm) New Aspen (Green) XHP1550VA
15.5" (39.4 cm) Tuscan Chestnut XHP1550VC
15.5" (39.4 cm) Ocean Sapphire XHP1550VE
15.5" (39.4 cm) Metallic Red XHP1550VF
15.5" (39.4 cm) Oxide XHP1550VJ
15.5" (39.4 cm) Emerald Green XHP1550VP
15.5" (39.4 cm) Burgundy XHP1550VM
Stack Kit
Are you planning to stack your washer and dryer? To do so you
will need to purchase a Stack Kit.
To order, call the dealer from whom you purchased your dryer or
refer to the "Assistance or Service" section. Ask for Part
Number 8541503.
4
Selecting the proper location for your washer improves
performance and minimizes noise and possible washer "walk."
Your washer can be installed under a custom counter, or in a
basement, laundry room, closet, or recessed area. See "Drain
System."
Companion appliance location requirements should also be
considered. Proper installation is your responsibility.
You will need
• A water heater set to deliver 120°F (49°C) water to the
washer.
• A grounded electrical outlet located within 6 ft (1.8 m) of
where the power cord is attached to the back of the washer.
See "Electrical Requirements."
• Hot and cold water faucets located within 4 ft (1.2 m) of the
hot and cold water fill valves, and water pressure of
20-100 psi (137.9-689.6 kPa).
• If you live in a hard water area, use of a water softener is
recommended to control the buildup of scale in the steamer
and other areas of the washer. Over time the buildup of lime
scale may clog the steamer, which will reduce steamer
efficiency and performance. Excessive buildup of scale may
lead to the need for steamer replacement or repair.
• A level floor with a maximum slope of 1" (2.5 cm) under entire
washer. Installing the washer on soft floor surfaces, such as
carpets or surfaces with foam backing, is not recommended.
• A sturdy and solid floor to support the washer with a total
weight (water and load) of 400 Ibs (180 kg).
Do not operate your washer in temperatures below 32°F (O°C).
Some water can remain in the washer and can cause damage in
low temperatures.
Installation clearances
• The location must be large enough to allow the washer door
to be fully opened.
• Additional spacing should be considered for ease of
installation and servicing.
• Additional clearances might be required for wall, door, and
floor moldings.
• Additional spacing of 1" (2.5 cm) on all sides of the washer is
recommended to reduce noise transfer.
Companion appliance spacing should also be considered.
Recommended installation spacing for custom
undercounter installation
The dimensions shown are for the recommended spacing.
Custom undercounter installation - Washer only
t
39" rain.
(99.0 cm)
+
1" _ 27"---_- 1"
(2.5 cm) (68.6 cm) (2.5 cm)
Recommended installation spacing for recessed or
closet installation, with or without a pedestal
The dimensions shown are for the recommended spacing.
Recessed area or closet installation
_f 3"
34,,T 48in.2. .
(86.4crn) (310crn2)
24 iR, 2. -
(188crn_)
I1" I_-31V2" ÷1 4"1<--
(2.8crn) (80crn) (10.2crn)
A B
A. Side view - closet or confined area
B. Closet door with vents
*Min. top and bottom air openings for closet door.
Recessed or closet installation - Washer on pedestal
(7.8crn)
-T
#
_f 3"
(7.8crn)
t
Washer Dimensions
51" (68.6crn)
(129.5cm)
27"
(80.0cm)
31W'
1" ---> <--- 1"
(2.8crn) (2.8crn)
27"-_
(68.6crn)
A
A. Recessed area
B. Side view - closet or confined area
I1"_ 31w'_1 4"1
(2.8cm) (80 crn)(10.2crn)
B
Recommended installation spacing for recessed or
closet installation, with stacked washer and dryer
Thedimensions shown arefor the recommended spacing.
4.8 in.2 *
(310cm2)
3"* (7.6 cm)
T
o
3"* (7.8cm)
24 in.2 *
(155cm2)
*Required spacing
6"*(;5.2 cm)
76" _
(193cm)
,!ii "ii?ii,
_!_i _!_i!!,!
1"* (2.5cm)
The washer can be installed using the standpipe drain system
(floor or wall), the laundry tub drain system, or the floor drain
system. Select the drain hose installation method you need. See
"Tools and Parts."
Standpipe drain system - wall or floor (views A & B)
The standpipe drain requires a minimum diameter standpipe of
2" (5 cm). The minimum carry-away capacity can be no less than
17 gal. (64 L) per minute.
The top of the standpipe must be at least 30" (76.2 cm) high and
no higher than 96" (2.4 m) from the bottom of the washer.
T
30"rain.
(76.2cm)
[
B
Laundry tub drain system (view C)
The laundry tub needs a minimum 20 gal. (76 L) capacity. The top
of the laundry tub must be at least 30" (76.2 cm) above the floor.
5½"**--_-
(14crn)
1" -t_ ._ 27" _
(2.5 cm) (68.6 cm) (2.5ore)
*Required spacing
**For venting out the side, 1" (2.5 cm) spacing is allowed.
Recommended installation spacing for cabinet
installation
The dimensions shown are for the recommended spacing.
For cabinet installation, with a door, the minimum ventilation
openings in the top are required.
" . ) 7" (17.8crn)
8B
r (22.9cm)
Floor drain system (view D)
The floor drain system requires a siphon break that may be
purchased separately. See "Tools and Parts."
The siphon break must be a minimum of 28" (71 cm) from the
bottom of the washer. Additional hoses might be needed.
if!, ..................
28" i _ "_ c: ..... :_
C
D
4 _ < 31V2
(10.2cm) (80.0cm) (2.5cm) (2.5cm) (68.6cm) (2.5cm)
1" 1" 27" 1"
6
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
[] A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical
supply is required. A time-delay fuse or circuit breaker is
recommended. It is recommended that a separate circuit
serving only this appliance be provided.
[] This washer is equipped with a power supply cord having
a 3 prong grounding plug.
[] To minimize possible shock hazard, the cord must be
plugged into a mating, grounded 3 prong outlet, grounded
in accordance with local codes and ordinances. If a mating
outlet is not available, it is the personal responsibility and
obligation of the customer to have the properly grounded
outlet installed by a qualified electrician.
[] If codes permit and a separate ground wire is used, it is
recommended that a qualified electrician determine that
the ground path is adequate.
[] Do not ground to a gas pipe.
[] Check with a qualified electrician if you are not sure the
washer is properly grounded.
[] Do not have a fuse in the neutral or ground circuit.
GROUNDING INSTRUCTIONS
For a grounded, cord-connected washer:
This washer must be grounded. In the event of a malfunction
or breakdown, grounding wilt reduce the risk of electrical
shock by providing a path of least resistance for electric
current. This washer is equipped with a cord having an
equipment-grounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local
codes and ordinances.
WARNING: Improper connection of the equipment-
grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you are in
doubt as to whether the appliance is properly grounded.
Do not modify the plug provided with the appliance - if it wilt
not fit the outlet, have a proper outlet installed by a qualified
electrician.
For a permanently connected washer:
This washer must be connected to a grounded metal,
permanent wiring system, or an equipment grounding
conductor must be run with the circuit conductors and
connected to the equipment-grounding terminal or lead on
the appliance.
INSTAL TION INSTRUCTIONS
Excessive Weight Hazard
Use two or more people to move and install washer.
Failure to do so can result in back or other injury.
1=
Insert new flat washers (supplied) into each end of the inlet
hoses. Firmly seat the washers in the couplings.
A B
IMPORTANT: Position the washer so that the rear of the washer
is within approximately 3 ft (90 cm) of its final location.
There are 4 bolts in the rear panel of the washer that support the
suspension system during transportation. These bolts also retain
the power cord inside the washer until the bolts are removed.
1=
Using a 13 mm wrench, loosen each of the bolts.
2,
Once the bolt is loose, move it to the center of the hole and
completely pull out the bolt, including the plastic spacer
covering the bolt.
3. Once all 4 bolts are removed, discard bolt and spacers. Then
pull the power cord through the opening of the rear panel and
close the hole with the attached cap.
4. Close the bolt holes with the 4 transport bolt hole plugs.
NOTE: If the washer is to be transported at a later date, call your
local service center. To avoid suspension and structural damage
to your washer, it must be properly set up for relocation by a
certified technician.
A. Coupfing
B. Washer
2. Make sure the washer drum is empty.
3. Attach the hose with the red color indicator to the Hot (left)
inlet valve. Attaching the red coupling first makes it easier to
tighten connection with pliers. Screw on coupling by hand
until it is seated on the washer.
4. Attach the hose with the blue color indicator to the Cold
(right) water inlet valve. Screw on coupling by hand until it is
seated on the washer.
/
/
H. Hot water inlet
C. Cold water inlet
5=
Using pliers, check the tightness of the hose couplings
already attached to the washer.
NOTE: Do not overtighten. Damage to the coupling can
result.
6=
Attach hot water hose to the hot water faucet. Screw on
coupling by hand until it is seated on the washer.
7,
Attach cold water hose to the cold water faucet. Screw on
coupling by hand until it is seated on the washer.
8,
Using pliers, tighten the couplings with an additional
two-thirds turn.
€
8
NOTE: Do not overtighten. Damage to the coupling can
result.
9. Turn on the water faucets and check for leaks.
NOTE: Replace inlet hoses after 5 years of use to reduce the
risk of hose failure. Record hose installation or replacement
dates on the hoses for future reference.
Periodically inspect and replace hoses if bulges, kinks, cuts,
wear, or leaks are found.
Proper routing of the drain hose protects your floors from damage
due to water leakage. Read and follow these instructions.
Remove drain hose from washer cabinet
Gently pull the corrugated drain hose from the shipping clips.
To keep drain water from going back into the washer:
• Do not straighten the drain hose, and do not force excess
drain hose into standpipe. Hose should be secure, but loose
enough to provide a gap for air.
• Do not lay excess hose on the bottom of the laundry tub.
Floor drain
You may need additional parts. See Floor drain under "Tools and
Parts."
1.
Drape the power cord over the washer top.
2.
Secure the drain hose to the laundry tub leg or standpipe with
the beaded strap provided. (See illustrations A and B.)
A B C
Laundry tub drain or standpipe drain
Connect the drain hose form to the corrugated drain hose.
A B
A. Snap either end of the drain hose form to the drainhose at
the point where the corrugation begins.
B.Bend drainhose over drain hose form and snap into place.
If the washer faucets and the drain standpipe are recessed
(see illustration C), put the hooked end of the drain hose in
the standpipe. Tightly wrap the beaded strap around the
water inlet hoses and the drain hose.
Do not force excess drain hose into the standpipe.
Properlylevelingyourwasheravoidsexcessivenoiseand
vibration.
1. Checkthelevelnessofthewasherbyplacingalevelonthe
topedgeofthewasher,firstsidetoside,thenfronttoback.
\ L
Ifthewasherisagainstawall,movethewasheroutslightly
beforetippingback.Ifthewasherisnotlevel,firstpropthe
frontwithawoodblockandadjustthefeetasnecessary;
thenpropthebackandadjustfeetasnecessary.Repeatthis
stepuntilwasherislevel.
2. Makesureallfourfeetarestableandrestingonthefloor.
Thencheckthatthewasherisperfectlylevel(usealevel).
3. Afterthewasherislevel,usea17mmopen-endwrenchto
turnthenutsonthefeettightlyagainstthewashercabinet.
IMPORTANT:Allfourfeetmustbetightened.Ifthenutsare
nottightagainstthewashercabinet,thewashermayvibrate.
4. Thewashershouldnotmovefronttoback,sidetoside,or
diagonallywhenpushedonitstopedges.
5. Slidethewashertoitsfinallocation.
6. Confirmthelevelnessofthewasher.
1__/_t ¸_
1. Checktheelectricalrequirements.Besurethatyouhavethe
correctelectricalsupplyandtherecommendedgrounding
method.See"ElectricalRequirements."
2. Checkthatallpartsarenowinstalled.Ifthereisanextrapart,
gobackthroughthestepstoseewhichstepwasskipped.
3. Checkthatyouhaveallofyourtools.
4. Disposeof/recycleallpackagingmaterials.
5. Checkthatthewaterfaucetsareon.
6. Checkforleaksaroundfaucetsandinlethoses.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
7=
Plug into a grounded 3 prong outlet.
8.
Read "Washer Use."
9.
To test and clean your machine, make sure there are no
clothes in the washer and add one AFFRESH TM tablet to the
washer drum. Select Power, the Clean Washer cycle and then
select START. This cycle will take approximately 67 minutes
to complete. Allow the washer to complete the entire cycle
without interruption.
10
FEATURESANDBENEFITS
The wool wash cycle of this machine has been
approved by Woolmark for the washing of machine
washable Woolmark products provided that the
WOOE MARK
Electronic Controls
Flexible electronic controls are easy to use whether you are a
beginner or an expert.
Smart Dispensers
The Smart Dispensers make your washer truly automatic. This
washer provides a four-compartment dispenser which includes
separate compartments for High Efficiency "HE" detergent, fabric
softener, liquid chlorine bleach and oxygen based stain fighters,
or color-safe bleach. The dispenser can easily be removed for
cleaning. Laundry products are dispensed automatically at the
proper time during the wash cycle, making it unnecessary for you
to return to the washer during the cycle to add them and ensuring
that these cleaning products perform their very best.
Deep Clean with Steam
This washer has a built-in steaming unit which is combined with
the DEEP CLEAN option to provide multiple temperatures to help
remove a variety of stains from garments.
Oxi / Color-safe Bleach Dispenser
With the Oxi / Color-safe bleach dispenser, there is no need to
come back and add your oxygen based stain fighter or your
color-safe bleach. Delaying the introduction of these products
helps remove many stains better.
garments are washed according to the instructions
on the garment label and those issued by the
manufacturer of this washing machine, M0706.
High-Efficiency Wash System
Your new front-loading, high-efficiency washer saves time with
fewer, larger loads. It also lowers your water and energy bills by
helping conserve resources.
Spin Speeds
This washer automatically selects the spin speed based on the
cycle selected. This factory setting can be changed, however.
This washer offers up to five different spin speed choices.
Heating Element
This washer has a heating element that automatically heats the
water to the optimal temperature on select cycles. This enables
stepped cleaning, a process in which warm water is brought in
and mixed with detergent first, then the water is heated. Stepped
cleaning starts the wash cycle with warm water to remove stains
(such as blood and grass).
6th SENSE TM Intuitive Controls
Intuitive intelligence "knows every load" determining load sizes,
water levels, and how much cleaning time is needed.
sense _
Add A Garment
When this option is available at the beginning of the cycle, the
Add a garment Status Light will glow for the first 4-8 minutes.
This washer allows a 4-8 minute period in which other garments
may be added to a load.
Clean Washer Cycle with Steam
This cycle uses steam to raise the temperature of the washer and
makes the washer self-cleaning, flushing the machine's interior
free of dirt and other residue. The use of AFFRESH TM washer
cleaner or liquid chlorine bleach with this cycle, will remove and
help avoid odor-causing residue.
Auto Water Level
This washer automatically adjusts water level for optimal cleaning
and rinsing performance. Two sensors determine load size, load
composition, and suds level, then the sensors adjust the water
level to the proper setting. This eliminates guesswork. The water
level is just right for every wash load size.
Larger Load Size
Since there is no agitator, you can wash larger, bulkier items such
as a king-sized bedspread. You are also able to wash more
clothes at one time, which means fewer loads.
Stainless Steel Drum
The stainless steel drum eliminates corrosion and enables higher
spin speeds for more water extraction, helping to reduce drying
time compared to traditional top-load washers.
Direct Injection Wash System
This washer channels 100% of the water through the dispensers
to assure thorough rinse-out and mixture of all the laundry
products before they touch any garments. The water is then
sprayed from the top front onto the center of the load, providing
even distribution and optimum cleaning performance. It is normal
for small amounts of water to remain in the dispensers when the
wash cycle is complete.
Efficient Detergent System with Anti-Escape Valve
This washer has a specially designed valve that closes during
the wash portion of the cycle so that 100% of the water and
detergent mixture is used on the load. The Efficient Detergent
System ensures that no water or detergent is wasted.
6-Point Suspension System
Shock absorbers, 2 springs, and electronic controls are specially
designed to help redistribute the load automatically and minimize
movement of the wash drum during the spin cycle. The 6-Point
Suspension System reduces the amount of force transmitted to
the floor by the washer, resulting in reduced noise and vibration.
11
WASHERUSE
NORMAL
DELICATE ACTIVEWEAR SlAnt
WASHABLES
QUICK
WASH
Doolocked 0 _') Cold _0 No Spin _© Light _ Off _0 Off
NOTE: The panel shown above may be different from that of your model.
Before washing clothes for the first time, if not completed during
the final installation step, choose the QUICK WASH cycle and run
it without clothes. Use only HE High Efficiency detergent. Use _/2
the manufacturer's recommended amount for a medium-size
load. This initial cycle serves to ensure the interior is clean before
washing clothes.
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::_
Fire Hazard
1. Open the washer door by pulling on the handle. Sort laundry
Never place items in the washer that are dampened
with gasoline or other flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Doing so can result in death, explosion, or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.
The following is a guide to using your washer. Please refer to
specific sections of this manual for more detailed information.
2=
Do not store laundry products on the top surface of this washer.
Vibration is normal during operation.
Use only High Efficiency detergents. The package for this type
of detergent will be marked "HE" or "High Efficiency." This wash
system, along with less water, will create too much sudsing with a
regular non-HE detergent. Using regular detergent will likely result in
washer errors, longer cycle times, and reduced rinsing performance.
It may also result in component failures and noticeable mold
or mildew. HE detergents are made to produce the right amount
of suds for the best performance. Follow the manufacturer's
3=
instructions to determine the amount of detergent to use.
Remember, concentrated detergent such as 2x or higher
will use less detergent based on load size.
EstimatedTimeRemahdng DeepClean OxiDispense{ Extra Rinse
DelayWash Qean
Reset IO Hot I0 Nigh
Washer [?© Sar'itize _O Extla High
Reminder
OPTIONS
First Wash Cycle Without Laundry
For All Wash Cycles
according to color and type of fabric. Place a load of sorted
clothes in the washer. Do not overload washer. Overloading
can cause poor cleaning.
[] The washer can be fully loaded, but not tightly packed.
Washer door should close easily.
[] Mix large and small items and avoid washing single items.
Load evenly.
[] Wash small items, such as infant socks, in mesh garment
bags. It is recommended that more than one garment bag
be used, and that each garment bag be filled with equal
amounts of material.
[] When unloading garments, occasionally check under the
gray colored seal at the front of the tub for small items.
Close the washer door by pushing it firmly until the lock
clicks. The washer door will remain locked during the wash
cycle.
NOTES:
[]
After any wash cycle is completed, the door must be
opened and then closed before a new cycle can begin.
[]
The door can be opened only if PAUSE/CANCEL is
selected while the Add A Garment light is glowing or if the
cycle has been canceled.
See "To cancel a cycle" in "Changing Cycles, Options,
and Modifiers" section.
Open the dispenser drawer and add laundry products to the
detergent, bleach, fabric softener, or oxygen based stain
fighter/color-safe bleach compartments. Close drawer slowly
to avoid spills. See "Using the Dispenser."
Use only HE High Efficiency detergent.
12
4. Turn on the washer by selecting POWER. Select one of the
cycles by turning the cycle selector. The indicator light for the
selected cycle will glow green. When you are selecting a
wash cycle, the preset options and modifiers (such as Water
Temp, Spin Speed, and Soil Level) for the selected cycle will
glow green. Selectable options will glow amber. If an option
or modifier is unavailable with a selected cycle, the light will
not illuminate. The display shows the estimated time
remaining. The preset settings provide the recommended
fabric care for the selected cycle. See "Cycles."
5. Select the desired Options. Not all options are available with
all cycles. See "Options."
6. Select the desired modifiers such as Water Temp, Spin Speed,
and Soil Level. Not all modifiers are available with all cycles
and options. See "Modifiers."
7. If desired, select the CYCLE SIGNAL. The signal is helpful
when you are washing items that should be removed from the
washer as soon as it stops. Select Loud, Soft, or Off.
8. If desired, select the BUTTON SOUND. This feature makes a
sound each time a button is pressed. Select Loud, Soft, or Off.
9. Select and hold START for approximately 1 second.
[] If you do not select START within 5 minutes of choosing a
cycle, the washer automatically shuts off.
[] When the wash cycle is complete, the DONE status light
glows, the door unlocks, and the wash load can be
removed from the washer. The washer powers down
automatically 60 minutes after the cycle is complete and
the DONE light goes off. To power down the washer
manually after the wash cycle is complete, select PAUSE/
CANCEL once.
10. To use the same cycle again, press POWER first, then select
START.
11. To begin the wash cycle later
Select DELAY WASH until the desired delay time (in hours)
shows in the Estimated Time Remaining display. Select
START. The countdown to the wash cycle will show in the
display window.
IMPORTANT." When delaying a cycle, use only powdered
detergents in the main wash compartment since liquid
detergents may seep out of the compartment during Delay
Wash, before the wash cycle begins.
Choosing the Right Detergent
Use only High Efficiency detergents. The package for this type
of detergent will be marked "HE" or "High Efficiency." This wash
system, along with less water, will create too much sudsing with a
regular non-HE detergent. Using regular detergent will likely result in
washer errors, longer cycle times, and reduced rinsing performance.
It may also result in component failures and noticeable mold
or mildew. HE detergents are made to produce the right amount
of suds for the best performance. Follow the manufacturer's
instructions to determine the amount of detergent to use.
Remember, concentrated detergent such as 2x or higher
will use less detergent based on load size.
Use only HE High Efficiency detergent.
To fill dispenser compartments
1. Pull out the dispenser drawer.
2. Add the desired laundry product to the proper compartment.
3. Push in the dispenser drawer slowly and completely (to avoid
a spill).
A
E
Your new washer has a dispenser drawer with four separate
compartments for your laundry products--one is for high
efficiency detergent, one is for liquid chlorine bleach, one is for
liquid fabric softener and one is for oxygen based stain fighters or
color-safe bleach. Laundry products are diluted and dispensed
automatically at the proper time during the wash cycle, making it
unnecessary for you to return to the washer during the cycle to
add them.
It is normal for small amounts of water to remain inthe
dispensers when the wash cycle is complete.
Do not put laundry products directly into the wash tub. Always
use the proper dispensers when adding laundry products.
D
\
Dispenser
A. Dispenser release lever
B. Oxi / Color-safe bleach
compartment
C. Detergent type selector
Oxi / Color=safe bleach compartment
(Letter B in Dispenser Illustration)
Liquid or powdered oxygen based stain fighter / color-safe
bleach may be used in this compartment, however powder is
recommended for optimal timed release. Add your oxygen based
stain fighter / color-safe bleach to this compartment when using
the OXI DISPENSER option. The oxygen based stain fighter /
color-safe bleach will automatically be dispensed during the
wash cycle if the OXl DISPENSER option is selected.
IMPORTANT." When delaying a cycle, use only powdered
detergents in the Oxi / Color-safe bleach compartment since
liquid detergents may seep out of the compartment during Delay
Wash, before the wash cycle begins.
D. High Efficiency "HE"
detergent compartment
E. Chlorine bleach compartment
F. Fabric softener compartment
13
HighEfficiency"HE"detergentcompartment
(LetterDinDispenserillustration)
Add liquid or powdered HE detergent to this compartment for
your wash cycle. The detergent type selector (A) must always be
in the correct position for the detergent type used. Slide the
detergent type selector to the correct position.
IMPORTANT: if you are using the Delay Wash option, powdered
detergent should be used in the compartment since liquid
detergents may seep out of the compartment, before the wash
begins.
[] Use the detergent manufacturer's recommended amount
for load size.
[] Liquid detergent:
A
Selector in position for liquid detergent
A. Detergent type selector
Fabric softener compartment
(Letter F in Dispenser illustration)
Pour measured liquid fabric softener into the fabric softener
dispenser, if desired.
[] Do not overfill. The dispenser holds 1/4cup (60 mL).
[] The fabric softener is dispensed in the rinse cycle, if Extra
Rinse is selected, the fabric softener will be dispensed during
the Extra Rinse.
[] Do not use fabric softener dispensing balls in this washer.
Dispensing balls will not operate correctly with this washer.
[] Do not spill or drip any fabric softener onto the clothes.
[] At the end of the cycle, a small amount of water may be left
in the dispenser. This is normal.
NOTE: Use only liquid fabric softener in this dispenser.
1,
To pause the washer at any time, press PAUSE/CANCEL.
2.
To continue the cycle, press START (for approximately
1 second).
Not all Options and Modifiers are available with all cycles.
Available modifiers will glow amber, if an option or modifier is
unavailable with a selected cycle, the light will not illuminate.
Cycles, Options, and Modifiers can be changed anytime before
START is selected.
[] Powdered detergent:
A
Selector in position for powdered detergent
A. Detergent type selector
Chlorine bleach compartment
(Letter E in Dispenser illustration)
Add no more than 2/3cup (160 mL) liquid chlorine bleach to this
compartment. The bleach will be automatically diluted and
dispensed at the best time during the first rinse after the wash
cycle. This compartment cannot dilute powdered bleach.
[] Always measure liquid chlorine bleach. Use a measuring cup
with a pour spout; do not guess. Follow the manufacturer's
directions for proper use.
[] Do not fill beyond the "MAX" level.
NOTE: Overfilling could cause garment damage.
[] At the end of the cycle, a small amount of water may be left in
the dispenser. This is normal.
To cancel a cycle and select a new cycle
1. Press PAUSE/CANCEL twice.
2. Press POWER.
3. Select desired cycle.
4. Select the desired Options or modifiers such as Water Temp,
Spin Speed, and Soil Level.
5. Press START (for approximately 1 second) to restart the
washer at the beginning of the new cycle.
r r ;;
To cancel a cycle
1. Press PAUSE/CANCEL twice.
2. The washer powers down, the door unlocks, and clothes can
be removed.
NOTE: if the water level or the temperature is too high, the
washer will drain automatically before the door unlocks.
r
To change Options or Modifiers after the cycle has
started
r
1. Press PAUSE/CANCEL once.
2. Select the desired Options or modifiers such as Water Temp,
Spin Speed, and Soil Level. Available selections will glow
amber.
3. Press START (for approximately 1 second) to continue the
cycle.
14
To drain the washer manually
Controls Lock/Unlock
1. Press PAUSE/CANCEL twice.
2. Press POWER.
3. Select DRAIN/SPIN.
4. Press START (for approximately 1 second) to begin the drain.
5. When the spin is complete, the door unlocks. Items can be
removed from the washer.
These lights show which portion of the cycle the washer is
operating. They also indicate when you can add an additional
item to the wash cycle and when the controls are locked.
EstimatedTimeRemaining
Add a garment
This washer allows a4-8 minute period in which other garments
may be added to the load. You can add items to the washer if the
Add a garment status light is glowing.
To add items when Add a garment light is glowing
1. Select PAUSE/CANCEL once. The washer door unlocks after
a few seconds, and items can be added.
2. To continue the cycle, close the door and select and hold
START (for approximately 1 second).
To add items when the Add a garment light is not glowing
1. You must cancel the current cycle by pressing PAUSE/
CANCEL twice. This will cancel the wash cycle and options.
The washer door unlocks, and items can be added.
2. Close the door, press POWER, and select the new cycle and
options. Select and hold START (for approximately 1 second).
Done
; r
The Done status light stays on for 60 minutes after the cycle is
complete, and then the washer shuts off.
Sanitized
This washer has a Sanitize water temperature that is certified
by NSF International, an independent third-party testing and
certification organization. The certification verifies that the
sanitizing cycle reduces 99.9% of bacteria typically found
on clothing, bedding, and towels, and there is no carryover
of bacteria between loads after the cycle is complete.
The Controls Lock avoids unintended use of the washer. You can
also use the control lock feature to avoid unintended cycle or
option changes during a cycle. When Controls Lock is lit, all
buttons are disabled except for Pause/Cancel and Start. You can
lock the controls while the washer is operating.
To lock the controls
Press and hold CONTROLS LOCK/UNLOCK for 3 seconds after
the cycle starts, or when the washer is turned off.
CoTt0Is Lock/Unlock
Heldfor3S<_cu_s
The status light next to the CONTROLS LOCK/UNLOCK button
will glow.
To unlock the controls
Press and hold CONTROLS LOCK/UNLOCK for 3 seconds until
the status light turns off.
NOTE: To lock or unlock the controls when the washer is off,
press and hold CONTROLS LOCK/UNLOCK for 3 seconds.
r
Door Locked
The cycle times vary automatically based on your water pressure,
water temperature, detergent, and clothes load.
The washer will automatically sense the progress in the cycle and
adjust the Estimated Time Remaining display. While the washer is
sensing, the estimated time will flash and the Sensing status light
will glow. When the sensing is complete, the flashing stops, the
status light goes off, and the Estimated Time Remaining display is
updated.
The cycle time will be extended if oversudsing occurs or the load
r
is unbalanced. The SUD routine removes extra suds and assures
proper rinsing of your garments. See "Troubleshooting." During
the unbalance routine, the time displayed may pause until this
activity is complete, then resume with the remainder of the cycle.
Clean Washer Reminder
r
The Clean Washer Reminder light illuminates to remind you to
use the Clean Washer cycle regularly. The reminder light will
illuminate every 30 cycles. The reminder light may be reset by
either running the Clean Washer cycle, or by pressing the CLEAN
WASHER RESET button.
r
Certified to Sanitize
If the "Sanitize" wash temperature was selected, when the wash
cycle is complete, the DONE status light will illuminate, the door
unlocks, and the wash load can be removed from the washer.
The washer powers down automatically 60 minutes after the
cycle is complete and the DONE status light turns off.
15
Cycles can be selected by turning the Cycle Control knob to the
desired cycle. Each cycle is designed for different types of fabric
and soil levels. The modifier indicator lights, on the right-hand
side of the panel, will change as cycles are selected.
NORMAL
DELICATE
WOOL
SILK
HAND
WASHABLES
QUICK
WASH
CLEANWASHER
With Ble_ch Only
ACTIVEWEAR
BULKYITEMS
HEAVYDUTY
WHITEST
WHITES
/SPIN
RINSE/SPIN
[] Each cycle has a preset Soil Level (estimated cycle time),
Water Temperature, and Spin Speed, and may have preset
options. The preset settings provide the recommended fabric
care for the selected cycle.
[] The preset settings will glow green to show the preselected
options and modifiers, and be changed anytime before START
is pressed. Not all options and modifiers are available with all
cycles. Available selections glow amber. (Tochange settings
after the cycle has started, press PAUSE/CANCEL once, then
select the desired settings. Press START to continue the
cycle.)
[] Powdered detergents may not dissolve well in a slow-speed
cycle. For best results, use liquid detergent in slow-speed
cycles.
Preset cycle settings
Each cycle has a preset Soil Level (cycle time), Water
Temperature, and Spin Speed. The preset settings provide the
recommended fabric care for the selected cycle. See chart.
Cycle Soil Level Water Temp Spin Speed
(cycle time)
Whitest Normal Hot/Cold Extra High
Whites (1:20)
Heavy Duty Normal Hot/Cold Extra High
(1:10)
Bulky Items Normal Warm/Cold Low
(0:55)
Active Wear Normal Warm/Cold Medium
(o:4o)
Normal/ Normal Warm/Cold High
Casual (0:50)
Delicate Normal Warm/Cold Medium
(0:40)
Wool Normal Warm/Cold Medium
(O:3O)
Silk Normal Cold/Cold No Spin
(O:25)
Hand Normal Cold/Cold Low
Washables (0:30)
Quick Wash Light Warm/Cold Extra High
(2-3 items) (0:25)
Cycle Soil Level Water Temp Spin Speed
(cycle time)
Clean N/A N/A N/A
Washer (0:67)
Soak Normal Warm/Cold No Spin
(O:3O)
Rinse/Spin Normal Cold/Cold Extra High
(0:22)
Drain/Spin Normal N/A Extra High
(0:13)
To change the preset cycle settings
Press the selector of each available setting until the desired
setting glows green.
Whitest Whites
This cycle is especially designed for cleaning loads of soiled
white fabrics with the addition of bleach. Hot washing
temperatures assure optimal bleach activity. An additional rinse
provides optimal rinse performance to avoid chlorine residues on
your laundry. This cycle combines fast-speed tumbling, longer
wash time, and extra high speed spin to shorten drying time.
Heavy Duty
Use this cycle to wash loads of sturdy, colorfast fabrics and
heavily soiled garments. This cycle combines fast-speed
tumbling, longer wash time, and extra high speed spin to shorten
drying times. If the water temperature is lower than needed for
this cycle, the heater will warm the water to the optimum
temperature.
Bulky Items
Use this cycle to wash large items such as blankets and
comforters. This cycle starts with a soak to thoroughly saturate
your large load. This is followed by medium wash action and low-
spin speeds to maintain load balance.
Active Wear
Use this cycle to wash small loads of exercise wear such as
biking shorts, tank tops, running tights, and other performance
clothing. This cycle combines low-speed tumbling and medium-
speed spin for gentle fabric care.
Normal/Casual
Use this cycle to wash loads of no-iron fabrics, such as sport
shirts, blouses, casual business clothes, permanent press
blends, cottons and linens, and synthetic fabrics. This cycle
combines medium-speed tumbling, high-speed spin, and a load
cooling process to reduce wrinkling.
NOTE: For the best energy performance, use the Normal/Casual
Cycle.
16
Delicate
Rinse/Spin
Use this cycle to wash sheer fabrics and lingerie. This cycle
combines low-speed tumbling and medium-speed spin for gentle
fabric care.
Wool
Use this cycle to clean machine washable woolen garments.
(Check the care instructions to make sure that garment is
washable.) CRADLE CLEAN TM motion offers gentle fabric care for
safe and effective cleaning of washable wool. This cycle features
gentle tumbling and medium-speed spin to provide optimum
garment care.
Silk
Use this cycle to clean washable silk garments. (Check label
instructions to make sure that garment is washable.) This cycle
gently tumbles and drains without spinning to gently clean
garments and minimize wrinkling. Because there is no spinning
action, garments will contain a higher amount of water at the end
of this cycle. CRADLE CLEAN TM motion offers gentle fabric care
for safe and effective cleaning of silk.
[] Use mesh garment bags to wash undergarments such as
underwire bras, items with strings, and small items such as
infant socks.
Hand Washables
Use this cycle to clean hand washable and special-care
garments. Similar to the way garments are hand washed in a
sink, the wash action of this cycle combines periods of low-
speed tumbling and soaking. Low-speed spin reduces wrinkling.
[] Use mesh garment bags as necessary.
Quick Wash
Use this cycle to wash small loads of 2-3 lightly soiled garments
that are needed in a hurry. This cycle combines fast-speed
tumbling, a shortened wash time, and extra high speed spin
to shorten drying time.
C{ean Washer
Use the Clean Washer cycle once a month to keep the inside of
your washer fresh and clean. This cycle uses a higher water level.
Use with AFFRESH TM washer cleaner tablet or liquid chlorine
bleach to thoroughly clean the inside of your washing machine.
This cycle should not be interrupted. See "Cleaning Your Washer"
in the "Washer Care" section.
IMPORTANT: Do not place garments or other items in the washer
during the Clean Washer cycle. Use this cycle with an empty
wash drum.
Soak
Use the Soak cycle to help remove small spots of set-in stains on
fabrics. This cycle provides a soak time with warm or cold water
followed by drain. Extra water, a short tumbling phase for equal
distribution of the laundry, and a soaking time without drum
movement improve the removal of set-in stains. Drain without
spin assures gentle treatment, even for delicate articles.
Use this cycle to get a rinse and spin only. This cycle combines
fast-speed tumbling and extra high speed spin. If desired, you
can reduce the spin speed by selecting the speed you want from
the SPIN SPEED modifier.
A Rinse/Spin cycle is useful for
[] Loads that need rinsing only.
[] Adding fabric softener to a load.
Drain/Spin
Use this cycle to drain your washer or to drain and spin your
wash load. The spin speed is preset to extra high. If desired, you
can reduce the spin speed by selecting the speed you want from
the SPIN SPEED modifier.
NOTE: Loads of synthetics, delicate fabrics, hand washables,
and washable woolens should be drained with no spin or low
spin speed to avoid fabric stress.
As with any new product, you will hear sounds that you are not
accustomed to. You may hear various sounds when the door is
locked and unlocked, and during the washing, rinsing, and
spinning process. Between changes in wash actions, there will
be momentary pauses. You will hear water spraying and
splashing during the wash and rinse cycles. These new sounds
and pauses are part of normal washer operation.
You can customize your wash by adding options to your cycle
selections. You can add or change an option after starting a cycle
anytime before the selected option begins. Not all options are
available with all cycles. Available options will glow amber.
Current selections will glow green. If an option is unavailable
with a selected cycle, the light will not illuminate.
DeepC[ean 0xiDispenser Extra Rinse
S_Ek&
OPT{ONS
Washel
Reset
D_I Clean
o _) ¢_L0_B _oLoud
O _O0ff _.)off
Reminder
[]
See the "Laundry Guide" for an overview of possible options
IOS0tt Iosoft
Button
Sound
for each Wash Cycle selection.
[]
You can select more than one option for a cycle. Some
options cannot be added to some cycles. For example, Deep
Clean cannot be added to the Quick Wash cycle.
If an option is unavailable with a selected cycle, there will be
3 short tones, and the light for that option will not glow when
selected.
17
Loading...