001_03
Installation, operating and
maintenance instructions
03/2006
ELECTRIC COOKERS
AGB 501/WP · AGB 502WP
AGB 586/WP · AGB 587/WP · AGB 585/WP
AGB 582/WP
AGB 487/WP · AGB 496/WP · AGB 497/WP
AGB 588/WP
AGB 503/WP · AGB 498/WP · AGS 655/WP
001-03 - Electric cookers
2
Models and dimensionsi page. 3
Technical data 10
Installation instructions 12
Installation 12
Legal and technical requisites 12
Installation 12
Wiring 12
Unipotential 12
Using the appliance 13
Ignition 13
Cleaning and taking care of the
appliance 14
What to do if not using the appliance
for a long time 14
What to do if something goes wrong 14
Maintenance 14
WEEE Directive 15
Wiring diagrams 16-46
Warning 47
INDEX
001-03 - Electric cookers
6
Dimensions
1080
700
800
800
AGB 487/WP
AGB 496/WP
Weight approx.109 kg / 93 kg
800
1080
700
800
1080
1080
700
1200
AGB 497/WP
Weight approx.116 kg
1080
1080
655
AGB 585/WP
Weight approx.94kg
1200
700
700
001-03 - Electric cookers
10
Data of appliances
The data plate is located on the front of the appliance and
on the control panel. It contains all necessary reference
data such as the name of the manufacturer.
3 - TECHNICAL DATA
CAT/KAT GAS/GAZ G30 G31 G20 G25
II2H3B/P P mbar 30 30 20 -
II2H3+ P mbar 30 37 20--
II2H3+ P mbar 28 37 20 -
0051
TIPO/TYPE
MOD.
ART.
N.
N.
Qn kW
MOD.
V AC kW Hz
THE APPLIANCE MUST BE CONNECTED IN COMPLIANCE WITH THE LAWS IN FORCE
AND INSTALLED IN A WELL-VENTILATED ROOM. READ THE INSTRUCTION MANUALS
BEFORE INSTALLING AND USING THE APPLIANCE.
THE APPLIANCE MUST BE INSTALLED BY QUALIFIED PERSONNEL.
II2ELL3B/P P mbar 50 50 20 20
II2E+3+ P mbar 28 37 20 25
II2H3B/P P mbar 50 50 20 -
I2E P mbar - - 20 -
II2H3+ P mbar 28 37 20 -
I3B/P P mbar 30 30
m3/h
I3+ P mbar 28 37
Predisposto a gas: - Gas preset: - Prevu pour gaz:
Eingestelt für Gas: - Preparado para gas: -
--II2H3B/P P mbar 30 30
--
--
Geschuckt voor:
SE FI DK CZ SK SI
IT CH PT
ES IE GB GR
NL
25II2L3B/P P mbar 30 30
DE
FR BE
AT CH
LU
EE LV LT
EE LV LT
NO MT CY IS HU
CY
MADE IN ITALY
Model
AGB 501/WP
AGB 502/WP
AGB 586/WP
AGB 587/WP
AGB 585/WP
AGB 582/WP
AGB 487/WP
AGB 496/WP
AGB 497/WP
AGB 588/WP
AGB 503/WP
AGS 655/WP
AGB 498/WP
Version
Electric range - 2 plates on open stand
Electric range - 2 square plates on open stand
Electric range - 4 plates on open stand
Electric range - 4 square plates on open stand
Electric range - 6 plates on open stand
Electric range - 6 square plates on open stand
Electric range - 2 plates
Electric range - 2 square plates
Electric range - 4 plates
Electric range - 4 square plates
Electric range - 6 plates
Electric range - 6 square plates
Electric range - 2 plates
Electric range - 2 square plates
Electric range - 4 plates
Electric range - 4 square plates
Electric range - 4 plates - oven 2/3 for grid 44 x 33
Electric range 4 plates - electric convection oven 1/1 GN multifunction
Electric range 4 square plates - electric convection oven 1/1 GN multifunction
Electric pyroceramic range 4 plates on el. convection oven 1/1 GN multifunction
Electric range 6 plates - electric convection oven 1/1 GN multifunction
Electric range 6 square plates - electric convection oven 1/1 GN multifunction
Electric range 4 plates - electric oven 2/1 GN
Electric range 4 plates - electric convection oven 1/1 GN
Electric range 4 square plates - electric oven 2/1 GN
Electric range 4 square plates - electric convection oven 1/1 GN
Electric pyroceram range 4 plates - 2/1 GN electric oven
Electric pyroceram range 4 plates - electric 1/1 GN convection oven
Electric range 6 plates - 2/1 GN electric oven - neutral unit
Electric range 6 plates - 1/1 GN electric convection oven
Electric range 6 plates - 1/1 GN electric convection oven - neutral unit
Electric range 6 square plates - 2/1 GN electric oven - neutral unit
Electric range 6 square plates - 1/1 GN electric convection oven
Electric range 6 square plates - 1/1 GN electric convection oven - neutral unit
Electric pyroceramic range with 2 plates
Electric pyroceramic range with 4 plates
Electric pyroceramic range with 2 plates
Electric pyroceramic range with 4 plates
Electric pyroceramic range with 2 plates - neutral unit
Electric pyroceramic range with 4 plates - neutral unit
Work surface on GN 2/1 electric oven
Pair of upright GN 2/1 electric ovens
Dim.: LxWxH
400 x 700 x 875
400 x 700 x 875
800 x 700 x 875
800 x 700 x 875
1200 x 700 x 875
1200 x 700 x 875
400 x 700 x 300
400 x 700 x 300
800 x 700 x 300
800 x 700 x 300
1200 x 700 x 300
1200 x 700 x 300
400 x 615 x 300
400 x 615 x 300
800 x 615 x 300
800 x 615 x 300
800 x 650 x 875
800 x 615 x 870
800 x 615 x 870
800 x 615 x 870
1200 x 615 x 870
1200 x 615 x 870
800 x 700 x 875
800 x 700 x 875
800 x 700 x 875
800 x 700 x 875
800 x 700 x 875
800 x 700 x 875
1200 x 700 x 875
1200 x 700 x 875
1200 x 700 x 875
1200 x 700 x 875
1200 x 700 x 875
1200 x 700 x 875
400 x 615 x 300
800 x 615 x 300
400 x 700 x 300
800 x 700 x 300
400 x 700 x 875
800 x 700 x 875
1000 x 700 x 875
1000x 700 x 1420
001-03 - Electric cookers
11
TABLE 1
Model
AGB 501/WP
AGB 502/WP
AGB 586/WP
AGB 587/WP
AGB 585/WP
AGB 582/WP
AGB 487/WP
AGB 496/WP
AGB 497/WP
AGB 588/WP
AGB 503/WP
AGS 655/WP
AGB 498/WP
Resistance (W) Voltage rating
1200
1800
700
1000
2100
2500
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1
1
-
2
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
2
-
2
-
2
-
2
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1
1
-
1
1
-
2
-
-
-
2
-
2
-
2
-
-
-
2
-
2
-
2
-
-
-
-
-
-
-
-
Plates
round
2000 W
1
-
2
-
3
-
1
-
2
-
3
-
2
-
4
-
4
4
-
-
3
-
2
2
-
-
-
-
3
3
3
-
-
-
-
-
-
-
-
-
-
-
2600 W
1
-
2
-
3
-
1
-
2
-
3
-
-
-
-
-
-
-
-
-
3
-
2
2
-
-
-
-
3
3
3
-
-
-
-
-
-
-
-
-
-
-
Plates
square
2600 W
-
2
-
4
-
6
-
2
-
4
-
6
-
2
-
4
-
-
4
-
-
6
-
-
4
4
-
-
-
-
-
6
6
6
-
-
-
-
-
-
-
-
Oven
2500 W
44x33
1
1
1
1
1
1
1
1
1
1
1
1
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Oven
5900 W
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1
-
1
-
1
-
1
-
-
1
-
-
-
-
-
-
-
-
1
2
Power
4.6 kW
5.2 kW
9.2 kW
10.4 kW
13.8 kW
15.6 kW
4.6 kW
5.2 kW
9.2 kW
10.4 kW
13.6 kW
15.6 kW
4.0 kW
5.2 kW
8.0 kW
10.4 kW
10.5 kW
10.5 kW
12.9 kW
10.5 kW
16.3 kW
18.1 kW
15.1 kW
11.7 kW
16.3 kW
12.9 kW
14.5 kW
11.1 kW
19.7 kW
16.3 kW
16.3 kW
21.5 kW
18.1 kW
18.1 kW
3.9 kW
8.0 kW
5.0 kW
8.6 kW
5.0 kW
8.6 kW
5.9 kW
11.8 kW
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
230 V 3 AC o 400 V 3N AC
Lead wire / Section
4 x 2.5 mm
4 x 2.5 mm
4 x 6 mm
4 x 6 mm
4 x 6 mm
4 x 6 mm
4 x 2.5 mm
4 x 2.5 mm
4 x 6 mm
4 x 6 mm
4 x 6 mm
4 x 6 mm
4 x 2.5 mm
4 x 2.5 mm
4 x 6 mm
4 x 6 mm
4 x 6 mm
4 x 6 mm
4 x 6 mm
4 x 6 mm
4 x 10 mm
4 x 10 mm
4 x 6 mm
4 x 6 mm
4 x 6 mm
4 x 6 mm
4 x 6 mm
4 x 6 mm
4 x 10 mm
4 x 6 mm
4 x 6 mm
4 x 10 mm
4 x 6 mm
4 x 6 mm
4 x 2.5 mm
4 x 2.5 mm
4 x 2.5 mm
4 x 2.5 mm
4 x 2.5 mm
4 x 2.5 mm
4 x 2.5 mm
4 x 2.5 mm
2 o
5 x 1.5 mm
2 o
5 x 1.5 mm
2 o
5 x 2.5 mm
2 o
5 x 2.5 mm
2 o
5 x 2.5 mm
2 o
5 x 2.5 mm
2 o
5 x 1.5 mm
2 o
5 x 1.5 mm
2 o
5 x 2.5 mm
2 o
5 x 2.5 mm
2 o
5 x 2.5 mm
2 o
5 x 2.5 mm
2 o
5 x 1.5 mm
2 o
5 x 1.5 mm
2 o
5 x 2.5 mm
2 o
5 x 2.5 mm
2 o
5 x 2.5 mm
2 o
5 x 2.5 mm
2 o
5 x 2.5 mm
2 o
5 x 2.5 mm
2 o
5 x 6 mm
2 o
5 x 6 mm
2 o
5 x 2.5 mm
2 o
5 x 2.5 mm
2 o
5 x 2.5 mm
2 o
5 x 2.5 mm
2 o
5 x 2.5 mm
2 o
5 x 2.5 mm
2 o
5 x 6 mm
2 o
5 x 4 mm
2 o
5 x 4 mm
2 o
5 x 6 mm
2 o
5 x 4 mm
2 o
5 x 4 mm
2 o
5 x 1.5 mm
2 o
5 x 1.5 mm
2 o
5 x 1.5 mm
2 o
5 x 1.5 mm
2 o
5 x 1.5 mm
2 o
5 x 1.5 mm
2 o
5 x 1.5 mm
2 o
5 x 1.5 mm
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
plates 22
square plates 22x22
001-03 - Electric cookers
12
Before beginning installation, remove all packaging from
the appliance. Some parts are protected with an adhesive
film which should be carefully removed.
Any remnants of glue should be thoroughly cleaned using
suitable substances such as benzine.
Under no circumstances should abrasive substances be
used.
Fit the legs to the appliance. The appliance must be levelled using a spirit level.
Slight irregularities can be levelled by adjusting the feet
themselves.
The main switch or plug should be located in the vicinity of
the appliance and easy of access.
We recommend installing the machine under a range hood
so that all the fumes are removed as quickly as possible.
Make sure that all fire prevention standards and safety precautions are strictly adhered to.
Legal and technical requisites
When installing the appliance, the following safety standards must be adhered to:
- Local accident prevention standards
- Current CEI standards.
Installation
Installation, start-up and maintenance should only be carried out by expert personnel.
All work required to install the appliance should be carried
out in compliance with all local standards and regulations.
The manufacturers decline all responsibility where poor
performance is due to incorrect installation in disregard of
the above conditions.
Warning!
In compliance with international regulations, when
connecting the appliance to the mains power supply, a
device with a minimum aperture of 3 mm between contacts must be fitted upstream of the appliance, allowing omnipolar disconnection of the appliance from
the mains.
Wiring
When choosing the lead wire, make sure it has the following characteristics: it should be at least of the H07 RNF type and its section should be large enough for the appliance (see "Technical specifications and dimensions",
page 11). Wire entry on top models is on the back wall,
and underneath all other models. In both cases the terminal board is at the front, behind the control panel.
Pass the wire through the core hitch and wire clamp, plug
the leads into their terminals on the board and secure
them. The earth lead must be a little longer than the others
so that it is the last lead to disconnect if the wire clamp
breaks.
Unipotential
The appliance must be connected up to a unipotential
system.
The connection screw is located on all top models at the
back on yhe right hand side, while in other models it is
located underneath the appliance on the right hand side.
It is labelled.
Warning!
The manufacturers cannot be held responsible for any
damage due to inadequate or incorrect installation.
Under such circumstances the guarantee will be considered null and void.
INSTALLATION INSTRUCTIONS
001-03 - Electric cookers
13
Warning!
- Beware of inexpert handling!
- Never leave the hotplates on unused!
- Only use flatbottomed pots and pans, and make sure
that the diameter of the pan is never smaller than the
diameter of the hotplate it is being used on..
Ignition (Fig.1)
Turn on the switch upstream of the appliance.
Hot plates
Turn the knob corresponding to the hotplate you wish to
use, to a number between 1 and 6. The pilot lamp will light
up as soon as the appliance is on. We advise first turning
the hotplate up to maximum temperature. Once this has
been reached, turn the knob to the required heat To turn
any hotplate off, simply turn the knob back to "0".
6 to begin cooking max. 5/10 min;
5 for high temperature cooking;
4 for medium temperature cooking;
3 to continue cooking large quantities;
2 to continue cooking small quantities;
1 to keep food hot or melt butter;
0 hotplate off.
Pyroceram model use (Fig. 2)
Turn on the appliance using the switch at the top.
Single power plates:
Rotate the knob for the plate required in a clockwise direction, remembering that the thinner part of the "comet" corresponds to the minimum amount of power and the thicker
part corresponds to the maximum amount. The pilot lamp
will come on indicating that the heating element has been
turned on.
Position ● corresponds to the fixed “on” setting of the heating element.
Double power plates:
Turn the knob for the plate required in a clockwise direction, remembering that the thinner part of the "comet" corresponds to the minimum amount of power and the thicker
part corresponds to the maximum amount. In this way,
only the central part of the heating element will be turned
on (1200 w). By rotating the knob the whole way and returning it to the position required, the external part of the heating element will also be automatically switched on (2200
w). The pilot lamp will come on indicating that the heating
element has been turned on. In order to return to reduced
power mode, turn the plate off and then on again.
Oven (Fig. 3)
Turn knob (A) to the type of cooking required.
Turn thermostat (B) to the required temperature.
Pilot lamp (C) will light up, indicating that the appliance is
on.
Pilot lamp (D) will light up, indicating that the resistances
are working; as soon as the required temperature is reached, it goes off.
When the resistances come on again, it lights up once more. To turn the oven off, turn both knobs back to their original position.
USING THE APPLIANCE
6
5
4
1
2
3
0
D
Suola e cielo
Top and bottom
Sole et ciel
Ober- und Hunterhitze
5
0
0
1
0
5
1
A
B
Cielo
Top
Ciel
Nur Oberhitze
3
0
0
2
5
0
2
0
0
C
Suola
Bottom
Sole
Nur Hunterhitze
001-03 - Electric cookers
14
The required temperature may be chosen by turning knob
24: warning light 26 comes on and goes out when the elements are switched on. To turn off the oven, turn the two
knobs to position ● (zero).
CLEANING AND TAKING CARE OF THE
APPLIANCE
Warning!
Never clean the appliance with jets of water, whether
direct or pressurised.
Thoroughly clean the appliance every evening after use.
Daily cleaning means better performance and a longer
useful life.
Before starting to clean the appliance, disconnect from
the mains.**
Remove all the extractable parts from the oven and wash
separately. All steel parts should be washed in warm water, using a neutral detergent. Avoid using abrasive or
corrosive detergents which could damage the steel.
What to do if not using the appliance
for a long time
Thoroughly clean and dry the machine as described.
Disconnect the power supply**
What to do if something goes wrong
If anything goes wrong, immediately turn the appliance
off, then turn off the power supply at the switch located
upstream of the appliance, and call the aftersales department
MAINTENANCE
All maintenance should be carried out by qualified personnel only. Before carrying out any maintenance work,
unplug the appliance or turn off the switch upstream of
the appliance**.
NOTE**
Models with a voltage of 230 V 3 AC have 2 lead wires; remember to cut off both power lines when disconnecting
these models; if only one or other of these leads is disconnected the appliance will stay live.
Turning the electric oven on and of
(Fig. 4)
Select the type of heating required by turning knob 23,
bearing in mind that the indicator light 25 stays on in all
positions.
This symbol indicates that the two interior oven lights are on without any type of heating selected
(optional).
Heating is both from above (ceiling element) and
below (floor element). This is the traditional
cooking mode.
The bottom heating element is switched on
(floor element). Heat therefore rises from bottom to top.
Heating is from top to bottom, as the top element
is switched on (ceiling element).
In this position the "grill" element, placed at the
top of the oven over the ceiling element, is switched on.
As in the previous position with the fan switched
on (convection).
In this position the ceiling element (above), the
floor element (below) and the fan are all switched
on (convection).
Convection cooking
In this position the heat is produced by a circular
element placed on the back of the oven around
the fan.
Defrosting mode
No heating element is in operation; only the fan is
switched on to quickly defrost frozen foods.
0
5
0
0
1
0
5
1
0
24 2623 25
3
0
0
2
5
0
0
2
THE 2002/96/EC DIRECTIVE (WEEE):
information to users
This informational note is meant only for owners
of equipment marked with the symbol shown in
Fig. A on the adhesive label featuring the technical specifications applied on the actual product
(the label also giving the serial number).
This symbol indicates that the product is classified, according to the regulations in force, as an item of electrical and
electronic equipment and conforms to EU Directive
2002/96/EC (WEEE) meaning that, at the end of its service
life, it must be treated separately from domestic waste, i.e.
it must be handed in free of charge to a separate waste
electrical and electronic equipment collection centre or returned to the reseller when buying a new equivalent item
of equipment.
The user is responsible for delivering the unit at the end of
its life to the appropriate collection facilities. Failure to do
so shall result in the user being subject to the penalties
prescribed by the legislation in force on waste.
Suitable separated collection so that the unit no longer
used can be sent off for environmentally compatible recycling, treatment and disposal helps avoid possible negative effects on the environment and on health and facilitates
the recycling of the product's component materials.
For more detailed information on available collection systems, contact the local waste disposal service or the
shop you purchased the unit from.
Producers and importers fulfil their responsibility for environmentally compatible recycling, treatment and disposal
both directly and by joining a collective scheme.
001-03 - Electric cookers
15