Weider 831159641 Owner’s Manual
Model No. 831.15964.1
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal (under
frame)
• Assembly
• Operation
• Maintenance
• Part List and Drawing
WEIGHT BENCH EXERCISER
User’s Manual
Sears, Roebuck and Co.
Hoffman Estates, IL 60179
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Keep this manual
for future reference.
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PART IDENTIFICATION CHART. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
PART LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
EXPLODED DRAWING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
ORDERING REPLACEMENT PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
90 DAY FULL WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
WARNING DECAL PLACEMENT
This drawing shows the location(s) of the warning
decal(s). If a decal is missing or illegible, call
1-877-992-5999 and request a free replacement
decal. Apply the decal in the location shown.
Note: The decal(s) may not be shown at actual size.
2
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your weight bench before using your weight bench.
Sears assumes no responsibility for personal injury or property damage sustained by or through the
use of this product.
1. It is the responsibility of the owner to ensure
that all users of the weight bench are adequately informed of all precautions.
2. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or persons with pre-existing health problems.
3. The weight bench is not intended for use by
persons with reduced physical, sensory, or
mental capabilities or lack of experience and
knowledge, unless they are given supervision or instruction about use of the weight
bench by someone responsible for their
safety.
4. Use the weight bench only as described in
this manual.
5. The weight bench is intended for home use
only. Do not use the weight bench in any
commercial, rental, or institutional setting.
6. Keep the weight bench indoors, away from
moisture and dust. Do not put the weight
bench in a garage or covered patio, or near
water.
7. Place the weight bench on a level surface,
with enough clearance around the weight
bench to mount, dismount, and use the
weight bench. To protect the floor or carpet
from damage, place a mat under the weight
bench.
10. Keep hands and feet away from moving
parts.
11. Always wear athletic shoes for foot
protection while using the weight bench.
12. The weight bench is designed to support a
maximum user weight of 300 lbs. (136 kg),
and a maximum total weight of 510 lbs.
(231 kg). Do not place more than 210 lbs.
(95 kg), including a barbell and weights (not
included), on the weight rests. Do not place
more than 130 lbs. (59 kg) on the leg lever.
13. Always place the same amount of weight on
both ends of your barbell. While adding or
removing weights, always keep some weight
on both ends of your barbell to prevent the
barbell from tipping. Always secure weights
with your spring collars.
14. Before you use the weight rests, make sure
that the weight rests are properly attached
to the uprights. In addition, make sure that
the spotters are properly attached to the
uprights.
15. Always make sure that the locking pin is
fully inserted into the seat frame and into
the pivot bracket before you use the weight
bench
16. Always exercise with a partner. Your partner
should be ready to catch your barbell if you
cannot complete a repetition
8. Inspect and properly tighten all parts each
time the weight bench is used. Replace any
worn parts immediately.
9. Keep children under age 13 and pets away
from the weight bench at all times.
17. Over exercising may result in serious injury
or death. If you feel faint, if you become short
of breath, or if you experience pain while
exercising, stop immediately and cool down.
3
BEFORE YOU BEGIN
Thank you for selecting the WEIDER® PRO 345
weight bench. The versatile PRO 345 weight bench is
designed to develop every major muscle group of the
body. Whether your goal is to have a shapely figure,
dramatic muscle size and strength, or a healthier cardiovascular system, the weight bench will help you to
achieve the specific results you want.
For your benefit, read this manual carefully before
using the weight bench. If you have questions after
Length: 6 ft. 8 in. (203 cm)
Width: 3 ft. 7 in. (110 cm)
Spotter
reading this manual, please see the back cover of this
manual. To help us assist you, note the product model
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual.
Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.
Weight Rest
Upright
Backrest
Seat
Leg Lever
Adjustment Knob
Olympic Adapter/
Weight Tube
Note: The terms “right side” and “left side” are determined relative to a person sitting on the
weight bench; the terms do not correspond to right and left in the drawings in this manual.
Locking Pin
Pivot Bracket
Adapter/Weight
Olympic
Storage Tube
4
PART IDENTIFICATION CHART
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. Note: If a part is not in
the hardware kit, check to see if it has been preassembled. Extra hardware may be included. If a part is
missing, call 1-877-992-5999.
M4 x 19mm
Screw (22)
M6 Washer
(26)
M8 Locknut
(17)
M6 x 40mm
Screw (30)
M8 x 80mm Bolt (43)
M8 Washer
(16)
M10 Locknut
(33)
M8 x 20mm
M10 Washer
(50)
M12 Locknut
(49)
M8 x 45mm Screw (48)
Screw (37)
M10 x 20mm
Screw (47)
M10 x 70mm Bolt (34)
M10 x 75mm Bolt (32)
M10 x 95mm Carriage Bolt (18)
M12 x 88mm Bolt (40)
5
ASSEMBLY
• Assembly requires two persons.
• Because of its weight and size, assemble the
weight bench in the location where it will be used.
Make sure that there is enough clearance to walk
around the weight bench as you assemble it.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you fi nish all assembly steps.
1. Go to www.weiderservice.com/registration on
your computer and register your product.
• activates your warranty
• saves you time if you ever need to contact
Customer Care
• allows us to notify you of upgrades and offers
Note: If you do not have Internet access, call
1-877-992-5999 and register your product.
• To identify small parts, see page 5.
• In addition to the included tool(s), assembly
requires the following tools:
one adjustable wrench
one Phillips screwdriver
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
1
2. Identify the Left and Right Stabilizers (13, 38).
Attach the Crossbar (3) and the Left Stabilizer
(13) to an Upright (1) with four M10 x 95mm
Carriage Bolts (18) and four M10 Locknuts (33);
do not tighten the Locknuts yet.
Attach the Crossbar (3) and the Right
Stabilizer (38) to the other Upright (1) in the
same way.
2
1
1
38
33
3
33
18
33
13
18
6
Loading...