Wavetek 38SW User Manual
December 2002
© 2003 Meterman Test Tools, All rights reserved. Printed in USA
All product names are trademarks of their respective companies.
38SW
Data Acquisition Software
Getting Started Manual
WARRANTY
The 38SW software for the 38XR Digital Multimeter is warranted against any defects of material or workmanship within a
period of 90 days following the date of purchase of the software CD by the original purchaser or original user. Any software
CD claimed to be defective during the warranty period should be returned with proof of purchase to an authorized Meterman
Test Tools Service Center or to the local Meterman Test Tools dealer or distributor where your software was purchased. See
maintenance section for details. Any implied warranties arising out of the sale of a Meterman Test Tools software, including
but not limited to implied warranties of merchantability and fitness for a particular purpose, are limited in duration to the
above stated 90 day period. Meterman Test Tools shall not be liable for loss of use of the software or other incidental or consequential damages, expenses, or economical loss or for any claim or claims for such damage, expenses or economical
loss. Some states do not allow limitations on how long implied warranties last or the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal
rights, and you may also have other rights which vary from state to state.
38SW
Data Acquisition Software
Introduction
The 38SW Data Acquisition Software support package (hereafter referred to as the 38SW ) is
designed to allow you to combine the power of your PC with the precision measuring capability of your
Model 38XR DMM. This combination lets your PC display, format, record, save and print any
measurement parameter being performed by the 38XR DMM. In addition, the 38SW can be set up to
monitor a measurement during specific time frames, alert you when and if a measurement goes
outside specified limits, and record all the results. The recorded data can be transmitted to remote
locations for processing (archive, analysis, etc.) at a later date.
The computer running the 38SW generates the time and date stamp used to display and store
recorded data from the 38XR DMM.
1
Loading...