WARN WG9 User Manual
kgf
mm
mm
mm
mm
kgf
kg
m
N*m
lbf kN m/min ft/min m/min ft m
1
9000 40.0 3.0 18.0 5.5 16 4.9
2
7577 33.7 3.6 21.4 6.5 34 10.4
3
6543 29.1 4.1 24.8 7.6 56 17.1
4
5757 25.6 4.7 28.2 8.6 80 24.4
* Never exceed the Rated Pulling Force. Installation of a Rated Capacity Limiter is recommended.
Duty Cycle
lbf kgf BAR min/10min
0 0 22.8 N/A
1500 680 33.6 N/A
3000 1361 45.6 N/A
4500 2041 57.2 N/A
6000 2722 69.8 N/A
7500 3402 81.4 N/A
9000 4082 92.6 N/A
Performance By Layer- Based on a 6.0ci motor & 3/8" (9.5 mm) dia. Rope
13.6
15.5
BAR
Line Load
Contactor / Remote Type:
in
psi
331
psi
Pressure Drop at 16 GPM
ft*lbf
ft
Line Speed 16 GPM
190in1614in
9.5
lbf
6532
35.4
987549.B1 9/2012
linespeed graph
pressure drop graph
Customer Service (North America): 1.800.543.9276
Customer Service (International): 1.503.722.3008
FAX: 1.503.722.3000 www.warn.com
31.4
12900 S.E. Capps Road,
Clackamas, OR USA 97015
87.7
1062
44.6
First Layer Performance
Pressure Drop at 9 GPM
122
Line Speed 9 GPM
ft/min
10.0
11.8
20.0
830
8.4
3437
662
488
2968
4082
Drum Layer
1272
58.1
646
290
1344
1012
1180
843
456
73.2
Part Number
Model
WG9-C-00
Standard Drum
Manual Clutch
The WG9 winch features robust construction, a durable powder coated finish,
and a proven oil-bath lubricated worm gearbox with for intermittent-duty
applications. The positive engagement clutch is simple and durable. The
WG9 is available in 2 drum widths and is designed to fit a variety of vehicles.
The winch is supplied with a standard 2-bolt SAE A motor flange and 1 inch
keyed shaft, allowing the user to select from a range of motor sizes.
Motor Type
Not Supplied
90100
WARN Industrial Winch
Note: Winch is supplied without hydraulic motor.
23671
23672
87464
89159
Part Number
Description:
Wire Rope Assembly 3/8''x50' EIPS
Wire Rope Assembly 3/8''x75' EIPS
Kit-Motor-Hyd-WG-6.0ci-Parker TB0100
Kit Motor-Hyd-WG-4.0ci-Parker TC0065
WARN INDUSTRIES, INC
Industrial Products
drum rotation image
Drum Barrel Diameter:
3/8
14400
Recommended Minimum Wire Rope Breaking Strength:
Brake Type: Disc
Gear Reduction: 36 :1
Drum Capacity
Rated Pulling Force:
Distance Between Flanges:
Duty Cycle (intermittent per SAE J706 section 6.2):
Approximate Shipping Weight:
Drum Flange Diameter:
7.48
Recommended Maximum Wire Rope Diameter:
92
Mounting Bolt Torque:
Maximum Layers of Wire Rope:
Viewed from Motor End
2611
kgf
Line Load *
N/A
Accessories
3.62
6.32
9000
1. -SAE J706
2.-CE Machinery Directive 98/37/EC and
2006/42/EC
116
55.0lb20 - 25
Automatic Locking Worm Gear
Standards
Compliance
34:1
Engineering Data
Drum Rotation
lbf
4082in27 - 34
24.9
0.0
10.0
20.0
30.0
40.0
1 2 3 4
Line Speed (ft/min)
Layer
16 GPM
9 GPM
0
500
1000
1500
0 3000 6000 9000
Pressure Drop (psi)
Line Load (lbf)
16 GPM
9 GPM
Maximum System Pressure: N/A psi N/A BAR
Maximum Motor Pressure Drop: N/A psi N/A BAR
Maximum Rated Input Flow: N/A GPM N/A LPM
image
Pull from top of winch
Feet forward
Pull from top of winch
schematic
987549.B1 9/2012
12900 S.E. Capps Road,
Clackamas, OR USA 97015
Customer Service (North America): 1.800.543.9276
Customer Service (International): 1.503.722.3008
FAX: 1.503.722.3000 www.warn.com
WARN INDUSTRIES, INC
Industrial Products
image
Notes:
Performance data based on 6.0ci motor.
Maximum Input Speed: 585 rpm
Maximum Input Torque: 800 in*lb (90 N*m)
Drum Rotation is Clockwise when viewed from Motor End with
Clockwise shaft input.
Feet down without angle brace
image
image
Angle Braces Only
Control Valve Type:
3-position, 4-way, closed
center, spring return
(cylinder spool)
Pull from top of winch
image
Control Valve Schematic
Feet forward
Feet down with angle brace
image
Feet down
Pull from top of winch
Pull from bottom of winch
Recommended Mounting- Always Observe Correct Drum Rotation
Hydraulic System Specifications
Model
90100
Part Number
WARN Industrial Winch
outline drawing
WG9-C-00
Standard Drum
Manual Clutch
Pull from bottom of winch
Motor Type
Not Supplied
Units are given in inches [millimeters], unless otherwise specified
2-bolt SAE "A"
motor flange, 1 inch
keyed shaft
Loading...