1
Abridged user’s manual
CS6719/CS6719-15/CS6719-16/CS6719-2
DECT 6.0 cordless telephone
The ENERGY STAR
®
program (www.energystar.gov) recognizes
and encourages the use of products that save energy and help
protect our environment. We are proud to mark this product with
the ENERGY STAR
®
label indicating it meets the latest energy
efciency guidelines.
T
Compatible with
Hearing Aid T-Coil
TIA-1083
Telephones identied with this logo have reduced noise and
interference when used with most T-coil equipped hearing aids and
cochlear implants. The TIA-1083 Compliant Logo is a trademark of the
Telecommunications Industry Association. Used under license.
Register online to get an additional 3-month warranty!
Go to www.vtechphones.com to register your product for enhanced
warranty support and latest VTech product news.
This Abridged user’s manual provides you with basic installation and use
instructions. A limited set of features are described in abbreviated form.
Please refer to the online Complete user’s manual for a full set of
installation and operation instructions at www.vtechphones.com.
For customer service, visit www.vtechphones.com or call 1 (800) 595-9511.
Before using this VTech product, please read Important safety instructions
on page 8 of this user’s manual.
You can expand your telephone system by adding expansion handsets
(CS6709, purchased separately). This telephone base supports up to
ve handsets.
2
Basic installation
Install telephone base & charger
Install handset battery
4
5
Set date and time
Common settings
Set handset ringer volume
9
10
8
Common operations
Directory
Speed dial
Caller ID
Basic steps to set up & operate your phone
Install wall mount bracket
3
2
1
7
6
Set quiet mode
Set voicemail number
Handset
(1 for CS6719/CS6719-15/CS6719-16)
(2 for CS6719-2)
Charger with power adapter
(1 for CS6719-2)
Telephone base
Telephone line cord
Telephone base power adapter
•
•
•
•
•
Battery compartment cover
(1 for CS6719/CS6719-15/CS6719-16)
(2 for CS6719-2)
Battery
(1 for CS6719/CS6719-15/CS6719-16)
(2 for CS6719-2)
Wall mount bracket
Abridged user’s manual
•
•
•
•
Parts checklist
Your package contains:
ECO mode
This power conserving technology reduces power
consumption for optimal battery performance.
The ECO mode activates automatically whenever the
handset is synchronized with the telephone base.
The handset shows ECO when the ECO mode activates.
ECO
HANDSET 1
10:15 PM
12/18
ECO
3
Install handset battery
2
Battery Pack / Bloc-piles :
(2.4V Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Battery Pack / Bloc-piles :
(2.4V Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Charge for at least 30 minutes before
initial settings.
Charge for 11 hours before initial use.
1
Install telephone base & charger
Plug!
Light on!
1 2 3
4
DSL lter
Plug!
Click!
Click!
Plug!
Plug!
4
Unplug!
3
Install wall mount bracket (optional)
Slide the base down!
Unplug!
1 2
3 4
5
INSTALLATION COMPLETED!
Keep reading for common settings and operations.
B
B
Plug!
Click!
5
If you subscribe to voicemail service offered by your telephone service
provider, you can save the voicemail number to 1 on each handset for
easy access. Contact your telephone service provider for more information
and assistance about using your voicemail service.
To set voicemail number:
Press MENU >> Press
/ to
Settings
>>
Press SELECT.
Press
/ to
Voicemail #
>>
Press SELECT.
Enter the voicemail number
>>
Press SELECT.
To retrieve voicemail messages:
Press and hold 1.
1.
2.
3.
Set voicemail number
7
You can turn on the quiet mode for a period of time. During this period, all
tones (except paging tone) are muted.
To set and turn on:
Press and hold QUIET#.
Enter the duration (1-12 hours) >> Press SELECT.
To turn off:
Press and hold QUIET#.
1.
2.
Set quiet mode
6
Set handset ringer volume
5
If you subscribe to caller ID service, the date and time are set automatically
with each incoming call. You can also set the date and time manually.
Press MENU >> Press
/ to
Set date/time >> Press SELECT.
Enter month (MM), date (DD) and year (YY) >> Press SELECT.
Enter hour (HH) and minute (MM) >> Press / for AM/PM
>> Press SELECT.
1.
2.
3.
Set date and time
4
You can adjust the ringer volume level, or turn the ringer off.
Press MENU >> Press
/ to
Ringers >> Press SELECT twice.
Press / to sample each volume level >> Press SELECT.
1.
2.
SETUP DONE!
Keep reading for some common operations.
6
This product supports caller ID services provided by most telephone
service providers. The caller ID log stores up to 50 entries.
The handset displays XX missed calls when you have incoming calls that
have not been answered.
To review and dial a caller ID entry:
Press CID >> Press
/
to the desired caller ID entry.
When the desired entry appears, press QUIET#
repeatedly to show different dialing options.
2. Press / to dial.
To erase the missed call indicator:
When you have reviewed all the missed calls, the missed
call indicator is erased.
If you want to erase the missed call indicator without reviewing the
caller ID log, press and hold CANCEL on the idle handset.
1.
•
Speed dial
CID
You can copy up to 9 directory entries into the speed dial locations
(0 and 2-9) so that you can dial them more quickly.
To assign a speed dial entry:
Press MENU >> Press
/ to
Directory >> Press SELECT.
Press
/ to
Speed dial >> Press SELECT.
Press
/ to
a desired location >> Press SELECT.
Press
/
to a desired directory entry >> Press SELECT.
To dial a speed dial entry:
Press and hold a dialing key (0 or 2-9) to dial the number stored in the
corresponding location.
1.
2.
3.
4.
Caller ID
10
9
8
The directory stores up to 50 entries which are shared by all
system handsets.
To add a directory entry:
Enter the phone number >> Press MENU/SELECT twice.
Enter the name >> Press SELECT.
To review and dial a directory entry:
Press .
Press
/
to browse to the desired directory;
or start an alphabetical search.
Press / to dial.
1.
2.
1.
2.
3.
Directory
7
Show the menu.
Select an item or save an entry or
setting in a menu.
•
•
Review the directory.
Increase the listening volume.
•
•
End a call. •
Review the caller ID log.
Decrease the listening volume.
•
•
Press repeatedly to review the
redial list.
Add a dialing pause while dialing or
entering a number.
•
•
Make or answer a call.
Answer a call waiting call.
•
•
Make or answer a call using the
speakerphone.
•
Mute a call.
Delete a digit or character.
•
•
Handset operation
8
Important safety instructions
When using your telephone equipment, basic safety precautions should always be followed to reduce
the risk of re, electric shock and injury, including the following:
Read and understand all instructions.
Follow all warnings and instructions marked on the product.
Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use
a damp cloth for cleaning.
Do not use this product near water such as near a bath tub, wash bowl, kitchen sink, laundry tub or
a swimming pool, or in a wet basement or shower.
Do not place this product on an unstable table, shelf, stand or other unstable surfaces.
Slots and openings in the back or bottom of the telephone base and handset are provided for
ventilation. To protect them from overheating, these openings must not be blocked by placing the
product on a soft surface such as a bed, sofa or rug. This product should never be placed near
or over a radiator or heat register. This product should not be placed in any area where proper
ventilation is not provided.
This product should be operated only from the type of power source indicated on the marking label.
If you are not sure of the type of power supply in your home or ofce, consult your dealer or local
power company.
Do not allow anything to rest on the power cord. Do not install this product where the cord may be
walked on.
Never push objects of any kind into this product through the slots in the telephone base or handset
because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any
kind on the product.
To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized
service facility. Opening or removing parts of the telephone base or handset other than specied
access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can
cause electric shock when the product is subsequently used.
Do not overload wall outlets and extension cords.
Unplug this product from the wall outlet and refer servicing to an authorized service facility under
the following conditions:
When the power supply cord or plug is damaged or frayed.
If liquid has been spilled onto the product.
If the product has been exposed to rain or water.
If the product does not operate normally by following the operating instructions. Adjust only
those controls that are covered by the operation instructions. Improper adjustment of other
controls may result in damage and often requires extensive work by an authorized technician
to restore the product to normal operation.
If the product has been dropped and the telephone base and/or handset has been damaged.
If the product exhibits a distinct change in performance.
Avoid using a telephone (other than cordless) during an electrical storm. There is a remote risk of
electric shock from lightning.
Do not use the telephone to report a gas leak in the vicinity of the leak. Under certain
circumstances, a spark may be created when the adapter is plugged into the power outlet, or
when the handset is replaced in its cradle. This is a common event associated with the closing
of any electrical circuit. The user should not plug the phone into a power outlet, and should
not put a charged handset into the cradle, if the phone is located in an environment containing
concentrations of ammable or ame-supporting gases, unless there is adequate ventilation. A
spark in such an environment could create a re or explosion. Such environments might include:
medical use of oxygen without adequate ventilation; industrial gases (cleaning solvents; gasoline
vapors; etc.); a leak of natural gas; etc.
Only put the handset of your telephone next to your ear when it is in normal talk mode.
The power adapters are intended to be correctly oriented in a vertical or oor mount position. The
prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or
cabinet outlet.
SAVE THESE INSTRUCTIONS
Precautions for users of implanted cardiac pacemakers
Cardiac pacemakers (applies only to digital cordless telephones):
Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the
interference between portable wireless telephones and implanted cardiac pacemakers. Supported by the U.S. Food and Drug
Administration, WTR recommends to physicians that:
Pacemaker patients
Should keep wireless telephones at least six inches from the pacemaker.
Should NOT place wireless telephones directly over the pacemaker, such as in a breast pocket, when it is turned ON.
Should use the wireless telephone at the ear opposite the pacemaker.
WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless telephones.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
•
•
•
•
•
•
13.
14.
15.
16.
•
•
•
9
Operating range
This cordless telephone operates with the maximum power allowed by the Federal Communications Commission (FCC). Even
so, this handset and telephone base can communicate over only a certain distance - which can vary with the locations of the
telephone base and handset, the weather, and the layout of your home or ofce.
When the handset is out of range, the handset displays Out of range or no pwr at base.
If there is a call while the handset is out of range, it may not ring, or if it does ring, the call may not connect well when you press
. Move closer to the telephone base, then press to answer the call.
If the handset moves out of range during a telephone conversation, there may be interference. To improve reception, move
closer to the telephone base.
Maintenance
Taking care of your telephone
Your cordless telephone contains sophisticated electronic parts, so it must be treated with care.
Avoid rough treatment
Place the handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it.
Avoid water
Your telephone can be damaged if it gets wet. Do not use the handset outdoors in the rain, or handle it with wet hands. Do not
install the telephone base near a sink, bathtub or shower.
Electrical storms
Electrical storms can sometimes cause power surges harmful to electronic equipment. For your own safety, take caution when
using electrical appliances during storms.
Cleaning your telephone
Your telephone has a durable plastic casing that should retain its luster for many years. Clean it only with a soft cloth slightly
dampened with water or mild soap. Do not use excess water or cleaning solvents of any kind.
About cordless telephones
Privacy: The same features that make a cordless telep hone convenient create some limitations. Telephone calls are
transmitted between the telephone base and the cordle ss handset by r adio waves, so there is a possibility that the
cordless telephone conversations could be intercepted by radio rec eiving equipment within range of the cordless
handset. For this reas on, you should not think of cordless telephone conversations as being as private as those on
corded telephones.
Elect rical powe r: The telephone base of this cordles s telephone must be connected to a work ing electrical outlet.
The elec trical outlet should not be controlled by a wall switch. Calls cannot be made from the cordless handset if the
telephone base is unp lugged, switched off or if the electrical power is interrupted.
Potential TV inte rference: Some cordless telephones operate at frequencies that may cause interference to tel evisions
and VCRs. To minimize or prevent such i nterferen ce, do not plac e the telephone base of the cordless telephone near or
on top of a TV or VCR. If interference is exp erienced, moving the cordless telephone far ther away from the TV or VCR
often reduces or eliminates the interference.
Rechargeable batteri es: Exercise care in handling batteries in order not to create a shor t circuit with conducting
material such as rings, bracelets and keys. The bat tery or con ductor may over heat and cause harm. Observe proper
polarity between the batter y and the battery charger.
Nickel -meta l hydride rechargea ble batteries: Dispose of these batteries in a safe manner. Do not burn or puncture
the battery. Like other bat teries of this type, if burned or punctured, they could release caustic material which could
cause injury.
The RBRC® seal
The RBRC
®
seal on the nickel-metal hydride battery indicates that VTech Communications, Inc. is voluntarily participating in
an industry program to collect and recycle these batteries at the end of their useful lives, when taken out of service within the
United States and Canada.
The RBRC® program provides a convenient alternative to placing used nickel-metal hydride batteries into the trash or municipal
waste, which may be illegal in your area.
VTech’s participation in RBRC
®
makes it easy for you to drop off the spent battery at local retailers participating in the RBRC®
program or at authorized VTech product service centers. Please call 1 (800) 8 BATTERYTM for information on Ni-MH battery
recycling and disposal bans/restrictions in your area. VTech’s involvement in this program is part of its commitment to protecting
our environment and conserving natural resources.
RBRC® is a registered trademark of Rechargeable Battery Recycling Corporation.
•
•
•
•
•
Remember that electrical appliances can cause serious injury if used when you are wet or standing in water. If the telephone
base should fall into water, DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORD AND TELEPHONE LINE
CORD FROM THE WALL. Then remove the telephone by the unplugged cords.
10
Limited warranty
What does this limited warranty cover?
The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (“Consumer” or “you”) that the
Product and all accessories provided in the sales package (“Product”) are free from defects in material and workmanship,
pursuant to the following terms and conditions, when installed and used normally and in accordance with the Product operating
instructions. This limited warranty extends only to the Consumer for Products purchased and used in the United States of
America and Canada.
What will VTech do if the Product is not free from defects in materials and workmanship during the limited
warranty period (“Materially Defective Product”)?
During the limited warranty period, VTech’s authorized service representative will repair or replace at VTech’s option, without
charge, a Materially Defective Product. If we repair the Product, we may use new or refurbished replacement parts. If we
choose to replace the Product, we may replace it with a new or refurbished Product of the same or similar design. We will
retain defective parts, modules, or equipment. Repair or replacement of the Product, at VTech’s option, is your exclusive
remedy. VTech will return the repaired or replacement Products to you in working condition. You should expect the repair or
replacement to take approximately 30 days.
How long is the limited warranty period?
The limited warranty period for the Product extends for ONE (1) YEAR from the date of purchase. If VTech repairs or replaces
a Materially Defective Product under the terms of this limited warranty, this limited warranty also applies to the repaired or
replacement Product for a period of either (a) 90 days from the date the repaired or replacement Product is shipped to you or
(b) the time remaining on the original one-year warranty; whichever is longer.
What is not covered by this limited warranty?
This limited warranty does not cover:
1. Product that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal
operation or handling, neglect, inundation, re, water or other liquid intrusion; or
2. Product that has been damaged due to repair, alteration or modication by anyone other than an authorized service
representative of VTech; or
3. Product to the extent that the problem experienced is caused by signal conditions, network reliability, or cable or antenna
systems; or
4. Product to the extent that the problem is caused by use with non-VTech accessories; or
5. Product whose warranty/quality stickers, product serial number plates or electronic serial numbers have been removed,
altered or rendered illegible; or
6. Product purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for
commercial or institutional purposes (including but not limited to Products used for rental purposes); or
7. Product returned without a valid proof of purchase (see item 2 below); or
8. Charges for installation or set up, adjustment of customer controls, and installation or repair of systems outside the unit.
How do you get warranty service?
To obtain warranty service in the USA, please visit our website at www.vtechphones.com or call 1 (800) 595-9511.
In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.
NOTE: Before calling for service, please review the user’s manual - a check of the Product’s controls and features may save
you a service call.
Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible
for delivery or handling charges incurred in the transport of the Product(s) to the service location. VTech will return repaired or
replaced Product under this limited warranty. Transportation, delivery or handling charges are prepaid. VTech assumes no risk for
damage or loss of the Product in transit. If the Product failure is not covered by this limited warranty, or proof of purchase does not
meet the terms of this limited warranty, VTech will notify you and will request that you authorize the cost of repair prior to any further
repair activity. You must pay for the cost of repair and return shipping costs for the repair of Products that are not covered by this
limited warranty.
What must you return with the Product to get warranty service?
1. Return the entire original package and contents including the Product to the VTech service location along with a description
of the malfunction or difculty; and
2. Include a “valid proof of purchase” (sales receipt) identifying the Product purchased (Product model) and the date of
purchase or receipt; and
3. Provide your name, complete and correct mailing address, and telephone number.
Other limitations
This warranty is the complete and exclusive agreement between you and VTech. It supersedes all other written or oral
communications related to this Product. VTech provides no other warranties for this Product. The warranty exclusively
describes all of VTech’s responsibilities regarding the Product. There are no other express warranties. No one is authorized to
make modications to this limited warranty and you should not rely on any such modication.
State/Provincial Law Rights: This warranty gives you specic legal rights, and you may also have other rights, which vary from
state to state or province to province.
Limitations: Implied warranties, including those of tness for a particular purpose and merchantability (an unwritten warranty
that the Product is t for ordinary use) are limited to one year from the date of purchase. Some states/provinces do not allow
limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall VTech be liable
for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost prots or revenue, inability
to use the Product or other associated equipment, the cost of substitute equipment, and claims by third parties) resulting from
the use of this Product. Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages,
so the above limitation or exclusion may not apply to you.
Please retain your original sales receipt as proof of purchase.
11
FCC, ACTA and IC regulations
FCC Part 15
This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the
Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connec t the equipment into an outlet on a circuit different from that to which the receiver is conne cted.
Consult the dealer or an experienc ed radio/ TV technician for hel p.
Changes or modications to this equipment not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation. Privacy of communications may not be ensured when using this telephone.
To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely
absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to
comply with the FCC criteria. The handset may be safely held against the ear of the user. The telephone base shall be installed
and used such that parts of the user’s body other than the hands are maintained at a distance of approximately 20 cm (8
inches) or more.
This Class B digital apparatus complies with Canadian ICES-003.
FCC Part 68 and ACTA
This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council
for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product
identier in the format US:AAAEQ##TXXXX. This identier must be provided to your telephone service provider upon request.
The plug and jack used to connect this equipment to premises wiring and the telephone network must comply with applicable
Part 68 rules and technical requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this
product. It is designed to be connected to a compatible modular jack that is also compliant. An RJ11 jack should normally be
used for connecting to a single line and an RJ14 jack for two lines. See the installation instructions in the user’s manual.
The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and
still have them ring when you are called. The REN for this product is encoded as the 6th and 7th characters following the US:
in the product identier (e.g., if ## is 03, the REN is 0.3). In most, but not all areas, the sum of all RENs should be ve (5.0) or
less. For more information, please contact your telephone service provider.
This equipment may not be used with Party Lines. If you have specially wired alarm dialing equipment connected to your
telephone line, ensure the connection of this equipment does not disable your alarm equipment. If you have questions about
what will disable alarm equipment, consult your telephone service provider or a qualied installer.
If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs
to this telephone equipment can only be made by the manufacturer or its authorized agents. For repair procedures, follow the
instructions outlined under the Limited warranty.
If this equipment is causing harm to the telephone network, the telephone service provider may temporarily discontinue your
telephone service. The telephone service provider is required to notify you before interrupting service. If advance notice is not
practical, you will be notied as soon as possible. You will be given the opportunity to correct the problem and the telephone
service provider is required to inform you of your right to le a complaint with the FCC. Your telephone service provider may
make changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product. The
telephone service provider is required to notify you if such changes are planned.
If this product is equipped with a corded or cordless handset, it is hearing aid compatible.
If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g., police, re,
medical) in these locations. If you do store or test emergency numbers, please:
Remain on the line and briey explain the reason for the call before hanging up.
Perform such activities in off-peak hours, such as early morning or late evening.
Industry Canada
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference, including interference that may cause undesired operation.
The term ‘’IC:‘’ before the certication/registration number only signies that the Industry Canada technical specications
were met.
The Ringer Equivalence Number (REN) for this terminal equipment is 1.0. The REN is an indication of the maximum number of
devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of
devices subject only to the requirement that the sum of the RENs of all the devices does not exceed ve.
This product meets the applicable Industry Canada technical specications.
•
•
•
•
12
Technical specications
Frequency control Crystal controlled PLL synthesizer
Transmit frequency Handset: 1921.536-1928.448 MHz
Telephone base: 1921.536-1928.448 MHz
Channels 5
Nominal effective range Maximum power allowed by FCC and IC. Actual operating range may vary according to
environmental conditions at the time of use.
Power requirements Handset: 2.4V Ni-MH battery
Telephone base: 6V AC @ 300mA
Charger: 6V AC @ 300mA
Memory Handset directory:
50 memory locations; up to 30 digits and 15 characters
Handset caller ID log:
50 memory locations; up to 24 digits and 15 characters
VTECH TELECOMMUNICATIONS LTD.
A member of THE VTECH GROUP OF COMPANIES.
Distributed in the U.S.A. by VTech Communications, Inc., Beaverton, Oregon
97008.
Distributed in Canada by VTech Technologies Canada Ltd., Richmond, B.C. V6W 1L5.
VTech is the registered trademark of VTech Holdings Limited.
Copyright © 2013 for VTECH TELECOMMUNICATIONS LTD.
All rights reserved. Printed in China.
91-006528-020-100
Loading...