VTech CS6529-16, CS6529-17, CS6529-4B User Manual

Abridged user’s manual
T
Compatible with
Hearing Aid T-Coil
TIA-1083
CS6529/CS6529-14/ CS6529-15/CS6529-16/ CS6529-17/CS6529-19 CS6529-2/CS6529-25/ CS6529-26/CS6529-3 CS6529-4B
DECT 6.0 cordless telephone
Register online to get an additional 3-month warranty!
Go to www.vtechphones.com to register your product for enhanced warranty support and latest VTech product news.
Telephones identified with this logo have reduced noise and interference when used with most T-coil equipped hearing aids and cochlear implants. The TIA-1083 Compliant Logo is a trademark of the Telecommunications Industry Association. Used under license.
The ENERGY STAR® program (www.energystar.gov) recognizes and encourages the use of products that save energy and help protect our environment. We are proud to mark this product with the ENERGY STAR efficiency guidelines.
®
label indicating it meets the latest energy
Introduction
To help protect the environment, this Abridged user’s manual provides you with the basic installation and use instructions. A limited set of features are described in abbreviated form.
Please refer to the online User’s manual for a full set of installation and operation instructions at www.vtechphones.com.
Before using this VTech product, please read Important safety instructions on pages 12 of this user’s manual.
BC
1
Parts checklist
Your telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary.
Handset
(1 for CS6529/CS6529-14/ CS6529-15/ CS6529-16/ CS6529-17/ CS6529-19/ (2 for CS6529-2/CS6529-25 CS6529-26)
CS6529-3)
(3 for (4 for CS6529-4B)
Telephone base power adapter
Abridged user’s manual
Battery compartment cover
(1 for CS6529/CS6529-14/ CS6529-15/ CS6529-16/ CS6529-17/ CS6529-19/ (2 for CS6529-2/CS6529-25 CS6529-26) (3 for (4 for CS6529-4B)
Abridged user’s manual
Charger and charger adapter
(1 for CS6529-2/CS6529-25 CS6529-26) (2 for
(3 for CS6529-4B)
CS6529-3)
CS6529-3)
Quick start guide
Quick start guide
Telephone base
Battery
(1 for CS6529/CS6529-14/ CS6529-15/ CS6529-16/ CS6529-17/ CS6529-19/ (2 for CS6529-2/CS6529-25 CS6529-26)
CS6529-3)
(3 for (4 for CS6529-4B)
Telephone line cord
Wall mount bracket
Telephone base and charger installation
Install the telephone base and charger as shown below.
Telephone wall jack
A DSL filter (not
Electrical outlet (not controlled by a wall switch)
Telephone base power adapter
Telephone base
Use only the power adapters and batteries supplied with this product. To order a
• replacement, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call
included) is required if you have DSL high-speed Internet service.
The DSL filter must be plugged into the telephone wall jack.
Telephone line cord
Electrical outlet (not controlled by a wall switch)
Charger adapter
Charger
1 (800) 267-7377.
2
Battery installation
Install the battery as shown below.
Plug the battery connector
1. Place the battery with the label securely into the socket.
Slide the battery compartment cover
3. Place the handset in the telephone towards the center of the handset until it clicks into place.
2. THIS SIDE UP facing up and the wires inside the battery compartment.
4. base or charger to charge.
CHARGE light remains on when charging.
Battery charging
Once you have installed the battery, the screen indicates the battery status (see the table below). For best performance, keep the handset in the telephone base or charger when not in use. The battery is fully charged after 11 hours of
continuous charging.
Battery indicators Battery status Action
The screen is blank, or displays Put in charger and flashes.
The screen displays Low battery and flashes.
The screen displays HANDSET X.
The battery has no or very little charge. The handset cannot be used.
The battery has enough charge to be used for a short time.
The battery is charged.
Charge without interruption (at least 30 minutes).
Charge without interruption (about 30 minutes).
To keep the battery charged, place it in the telephone base or charger when not in use.
Wall mounting (optional)
To mount your telephone on a wall:
Position the telephone base against
1. from the telephone wall jack, and the telephone base power adapter from the electrical outlet (if necessary).
2.Remove the telephone line cord the wall mount bracket with the extended tabs marked B on top. Insert the extended tabs marked B on the wall mount bracket into the slots marked B on the back of the telephone base. Push the telephone base down until it clicks securely.
Route the telephone line cord
3. through the hole on the wall mount bracket and plug it into the telephone wall jack. Route the power cord out of the telephone base and plug it into an electrical outlet not controlled by a wall switch.
Align the holes on the bracket with
4. the standard wall plate and slide the bracket down until it locks securely. Bundle the telephone line cord and power adapter cord neatly with twist ties.
3
Handset overview
CHARGE light
On when the handset is
• charging.
/ /VOLUME
Review the directory when the
• phone is not in use.
Increase the listening volume
• during a call or message playback.
Scroll up while in a menu, or
• in the directory, caller ID log or redial list.
Move the cursor to the right
• when entering numbers or names.
REDIAL/PAUSE
Press repeatedly to review the
• redial list.
Press and hold to insert a
• dialing pause while dialing or entering a number.
/FLASH
Make or answer a call.
• Answer another incoming call
• during a call.
1
Press repeatedly to add or
• remove 1 in front of the caller
ID log entry before dialing or saving it to the directory.
Press and hold to set or dial
• your voicemail number.
Dialing keys
Enter numbers or characters.
TONE
Switch to tone dialing
• temporarily during a call.
Make or answer a call using the
• handset speakerphone.
During a call, press to switch
• between the speakerphone and the handset.
CID/ /VOLUME
Review the caller ID log when
• phone is not in use.
the Decrease the listening volume
during a call or message playback.
Scroll down while in a menu,
or in the directory, caller ID log or redial list.
Move the cursor to the left
when entering numbers or names.
MENU/SELECT
Show the menu.
While in a menu, press to
select an item, or save an entry or setting.
OFF/CANCEL
Hang up a call.
• Silence the ringer temporarily
• while the handset is ringing.
Press and hold to erase the
• missed call indicator while the phone is not in use.
Press to return to the previous
• menu, or press and hold to return to idle mode, without making changes.
QUIET#
Press and hold to set and turn
• on the quiet mode, or turn it off.
Press repeatedly to show other
• dialing options when reviewing a caller ID log entry.
INT
Start an intercom conversation
• or transfer a call (for multi-handset models only).
MUTE/DELETE
Mute the microphone during
• a call.
Delete digits or characters
• while using the dialing keys.
Silence the ringer temporarily
• while the handset is ringing.
Delete the displayed entry
• while in the directory, caller ID log or redial list.
Telephone base overview
/REPEAT
Press to repeat a message.
• Press twice to play the
• previous message.
IN USE light
Flashes when there is an
• incoming call, or another
telephone sharing the same line is in use.
On when the handset is
• in use, or the answering system is answering a call.
FIND HANDSET
Press to page all system
• handsets.
ANS ON/OFF
Turn the answering system
• on or off.
Message window
Shows the number of messages, and other
• information of the answering system or
telephone base.
X/DELETE
Delete the playing message.
• Press twice to delete
• all previously reviewed messages when the phone is not in use.
/SKIP
Skip to the next message.
+ and
VOL
Adjust the volume during
• message playback.
Adjust the telephone base
• ringer volume when the phone is not in use.
/ PLAY/STOP
Play or stop playing messages.
VOL-
4
Using the menu
Press MENU when the handset is not in use.
1. Press or until the screen displays the desired feature menu.
2. Press SELECT.
3. To return to the previous menu, press CANCEL.
• To return to idle mode, press and hold CANCEL.
Telephone settings
Default settings are indicated by asterisks (*).
Menu setting Description Options
LCD language
Voicemail #
Clr voicemail
Key tone
Home area code
Dial mode
Use the Clr voicemail feature when the telephone indicates there is new voicemail
but there is none. For example, when you have accessed your voicemail while away from home. The Clr voicemail feature only turns off the indicators; it does not delete your voicemail messages. As long as you have new voicemail messages, your telephone service provider continues to send the signal that turns on the indicators.
Set the screen display language.
Set the speed dial voicemail number.
Turn off the voicemail indicators (see the note below).
Set whether the handset beeps whenever a key is pressed.
Set the home area code so that the caller ID log stores only seven digits for local telephone numbers.
Set the telephone to be touch-tone or pulse dialing.
English* Français Español
Voicemail #
-
Reset VM Icon?
Key tone:On* Key tone:Off
Home area code _ _ _
Touch-tone* Pulse
The following are some of the telephone features you may wish to set. Refer to Telephone settings in the online Complete user’s manual for complete instructions on setting all telephone features.
Ringer volume (handset)
You can adjust the ringer volume level, or turn the ringer off.
Press MENU when the handset is not in use.
1. Scroll to Ringers and then press SELECT twice.
2. Press or to sample each volume level, then press SELECT to save.
3.
When the ringer volume is set to Off, the handset still rings when you press
FIND HANDSET on the telephone base.
Set date and time
If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. You can also set the date and time manually.
Press MENU when the handset is not in use.
1. Scroll to Set date/time and then press SELECT.
2. Use the dialing keys (0-9) to enter the month (MM), date (DD) and year (YY).
3. Then press SELECT.
Use the dialing keys (0-9) to enter the hour (HH) and minute (MM).
4.
Then press or to choose AM or PM. Press SELECT to save.
5.
Telephone operation
Make a call
Press or and then dial the telephone number.
Answer a call
Press , or any dialing key.
End a call
Press OFF or put the handset to the telephone base or charger.
Speakerphone
During a call, press to switch between speakerphone
• and normal handset use.
Volume
During a call, press VOLUME/ or VOLUME/ to adjust
• the listening volume.
5
Loading...
+ 11 hidden pages