Vtech CS6429-16 User Manual

Complete user’s manual

w w w.v t e c h p h o n e s . c o m

Models: CS6428-2/CS6429/

CS6249-15/CS6429-16/ CS6429-2/CS6429-3/ CS6429-4/CS6429-5

Congratulations

Compatible with

Hearing Aid T-Coil

TIA-1083

on purchasing your new VTech product. Before using this telephone, please read Important safety instructions on page 63 of this manual.

This manual has all the feature operations and troubleshooting necessary to install and operate your new VTech telephone. Please review this manual thoroughly to ensure proper installation and operation of this innovative and feature rich VTech product. For support, shopping, and everything new at VTech, visit our website at www.vtechphones.com. In Canada, please visit

www.vtechcanada.com.

The ENERGY STAR® program (www.energystar.gov) recognizes and encourages the use of products that save energy and help protect our environment. We are proud to mark this product with the ENERGY STAR

label indicating it meets the latest energy efciency guidelines.

Telephones identied with this logo have reduced noise and interference

when used with most T-coil equipped hearing aids and cochlear implants. The TIA-1083 Compliant Logo is a trademark of the Telecommunications Industry Association. Used under license.

Visit www.vtechphones.com.

Registration

Product news

Learn about the latest VTech products.

Table of contents

Getting started ................................1

Parts checklist ..................................1

Telephone base and charger

installation .....................................2

Battery installation ............................3

Battery charging ...............................5

Installation options ............................6

Rewiring of telephone line for cable/

VoIP service users ........................8

Telephone base layout ....................9

Handset layout ...............................10

Telephone settings .......................12

Using the menu ..............................12

Ringer volume (telephone base) ....12

Ringer volume (handset) ................13

Ringer tone .....................................13

LCD language.................................14

Clear voicemail indicators...............15

Key tone .........................................15

Set date and time ...........................16

Home area code .............................17

Dial mode .......................................17

Telephone operation ....................18

Make a call .....................................18

Predial a call ...................................18

Answer a call ..................................18

End a call ........................................18

Speakerphone ................................18

Volume ...........................................18

Mute................................................19

Call waiting .....................................19

Temporary ringer silencing .............19

Temporary tone dialing ...................19

Redial list ........................................20

Review and dial a redial entry ........20

Store a number from the redial list

to the directory ............................20

Delete a redial entry .......................20

Chain dialing ...................................21

Join a call in progress .....................22

Find handset ...................................22

Intercom..........................................23

Answer an incoming call during an

intercom call ................................24

Call transfer using intercom ............24

Directory ........................................26

About the directory .........................26

Create a new directory entry ..........27

Review the directory .......................29

Alphabetical search ........................29

Dial a directory entry.......................29

Edit a directory entry.......................29

Delete a directory entry ..................29

Speed dial.......................................30

Store a speed dial entry..................30

Dial a speed dial number ................31

Delete a speed dial entry ................31

Caller ID .........................................32

About caller ID ................................32

Information about caller ID with

call waiting...................................32

Call log............................................33

Missed call indicator .......................34

Memory match ................................34

Review and dial from the call log ....34

View dialing options ........................35

Save a call Iog entry to the

directory ......................................35

Table of contents

Delete from the call log ...................36

Call log display screen

messages ....................................36

Answering system settings .........37

Answering system setup.................37

Answer on/off..................................37

Announcement ...............................37

Record a new announcement.........38

Play the announcement ..................38

Delete your announcement ............38

Call screening .................................39

Number of rings ..............................39

Remote access code ......................39

Message alert tone .........................40

Recording time ...............................40

Answering system operation ......41

Answering system and voicemail

indicators .....................................41

Using the answering machine and

voicemail together ......................41

Voice prompts.................................42

Message capacity ...........................42

Answering system new message

indication .....................................42

Call screening at the telephone

base ............................................42

Call screening at the handset .........43

Call intercept...................................43

Message playback ..........................43

Delete all old messages .................45

Record, play or delete memos........46

Message window displays ..............47

Remote access ...............................48

Appendix .......................................49

Handset display screen

messages ....................................49

Handset and telephone base

indicators .....................................51

Battery ............................................52

Expand your telephone system ......53

Add and register a handset

(optional) .....................................53

Replace a handset..........................54

Troubleshooting ..............................55

Important safety instructions...........63

Precautions for users of implanted

cardiac pacemakers ....................64

Operating range..............................64

Maintenance ...................................65

About cordless telephones .............66

The RBRC® seal .............................66

Limited warranty .............................67

FCC, ACTA and IC regulations ......69

Technical specications..................71

Index ..............................................72

Getting started

Parts checklist

Your telephone package contains the following items. Save your sales receipt and original packaging in case it is necessary to ship your telephone for warranty service.

Battery compartment cover

(1 for CS6429/CS6429-15/CS6429-16) (2 for CS6428-2/CS6429-2) (3 for CS6429-3) (4 for CS6429-4) (5 for CS6429-5)

Wall mount bracket

To purchase replacement batteries or power adapters, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.

Battery

(1 for CS6429/CS6429-15/ CS6429-16) (2 for CS6428-2/CS6429-2) (3 for CS6429-3) (4 for CS6429-4) (5 for CS6429-5)

Telephone baseHandset

Abridged user’s manual

Telephone line cord

Telephone base power adapter

Charger and charger adapter

(1 for CS6428-2/CS6429-2) (2 for CS6429-3) (3 for CS6429-4) (4 for CS6429-5)

Quick start guide

Abridged user’s manual Quick start guide

Getting started

Telephone base and charger installation

Install the telephone base and charger(s) as shown below.

If you subscribe to digital subscriber line (DSL) high-speed Internet service through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack. Contact your DSL service provider for more information about DSL filters.

The telephone base comes ready for tabletop use. If you want to mount your telephone on a wall, refer to Tabletop to wall mount installation on page 6 for details.

Telephone base power adapter

Electrical outlet not controlled by a wall switch

Telephone wall jack

A DSL filter (not included) is required if you have DSL highspeed Internet service.

The DSL filter must be plugged into the telephone wall jack.

Telephone line cord

Electrical outlet not controlled by a wall switch

CAUTION: If you subscribe to telephone service from a cable company or a VoIP service provider, plug the telephone line cord into the modem/router/terminal adapter provided by your cable/VoIP service provider. Contact your cable/VoIP service provider if you have any difficulties in installation.

Charger adapter

ChargerTelephone base

Use only the power adapters supplied with this product. To order a

• replacement, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or dial 1 (800) 267-7377.

The power adapters are intended to be correctly oriented in a vertical or floor

• mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.

Getting started

Battery installation

Install the battery as shown below.

Plug the battery connector securely into the socket inside the handset

1. battery compartment.

Place the battery with the label THIS SIDE UP facing up and the wires inside

2. the battery compartment.

Align the cover flat against the battery compartment, then slide it towards the

3. center of the handset until it clicks into place.

Getting started

Battery installation (continued)

Charge the handset by placing it in the telephone base or charger. The

CHARGE light is on when the handset is charging.

CHARGE light

remains on when charging.

IMPORTANT:

Check for a dial tone by pressing . If you hear a dial tone, the installation is successful.

If you do not hear a dial tone:

Make sure the installation procedures described above are properly done.

• It may be a wiring problem. If you have changed your telephone service to

• digital service from a cable company or a VoIP service provider, the telephone line may need to be rewired to allow all existing telephone jacks to work. Refer to Rewiring of telephone line for cable/VoIP service users on page 8 for more information.

If the handset will not be used for a long time, disconnect and remove the

• battery to prevent possible leakage.

To purchase replacement batteries, visit our website at

• www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or dial 1 (800) 267-7377.

Getting started

Battery charging

Once you have installed the battery, the screen indicates the battery status (see the table below). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the telephone base or charger when not in use. The battery is fully charged after 10 hours of continuous charging. See the table on page 52 for battery operating times.

If the screen is blank, you need to charge the handset without interruption for at least 30 minutes to give the handset enough charge to use the telephone for a short time. When the battery is low, the handset plays four short beeps and shows LOW BATTERY along with a flashing icon. When you are on a call in low battery mode, the handset plays four short beeps every 50 seconds.

The following table summarizes the battery charge indicators and actions to take.

Battery indicators Battery status Action

The screen is blank, or shows PLACE IN CHARGER and flashes.

Battery has no charge or very little charge. The handset cannot be used.

Charge without interruption (at least 30 minutes).

The screen shows LOW BATTERY and

flashes.

The screen shows HANDSET X.

If you place the handset in the telephone base or charger without plugging in a battery, the screen displays NO BATTERY.

Battery has enough charge to be used for a short time.

Battery is charged. To keep the battery charged,

Charge without interruption (at least 30 minutes).

place it in the telephone base or charger when not in use.

After you install your telephone or power returns following a power outage, the handset will prompt you to set the date and time. For instructions, see Set date and time on page 16. To skip setting the date and time, press OFF/CANCEL.

SET DATE

--/--/--

Getting started

Installation options

The telephone comes ready for tabletop use. If you want to mount your telephone on a wall, use the provided wall mount bracket to connect with a standard dual-stud telephone wall mount plate. If you do not have this wall mount plate, you can purchase one from many hardware or consumer electronics retailers. You may need a professional to install the wall mount plate.

Tabletop to wall mount installation

Plug one end of the telephone line cord into the TEL LINE jack on the bottom

1. of the telephone base. Plug the small end of the base power adapter into the POWER jack on the bottom of the telephone base.

Position the telephone base against the wall mount bracket. Insert the extend tabs

2. (marked B) of the wall mount bracket into the slots (marked B) on the back of the telephone base. Push the telephone base down until it clicks securely in place.

Route the telephone line cord (or DSL filter) through the hole in the middle

3. of the wall mount bracket and plug it into the telephone wall jack. Route the power cord out of the bottom of the telephone and plug it into an electrical outlet not controlled by a wall switch.

Align the holes on the bracket with the standard wall mount plate and slide the

4. bracket down until it locks securely. Bundle the telephone line cord and power adapter cord neatly with twist ties.

Getting started

Installation options (continued)

Wall mount to tabletop installation

If the telephone line cord and power adapter cord are bundled, untie

1. them first.

Slide the black wall mount bracket up and remove it from the wall mount plate.

2. Unplug the end of the telephone line cord (or DSL filter) from the telephone wall jack. Unplug the power adapter from the power outlet.

Slide the telephone base up and remove it from the wall mount bracket.

3. See Telephone base and charger installation on page 2.

Getting started

Rewiring of telephone line for cable/VoIP service users

If you have changed to cable/VoIP service through a modem/router/terminal adapter to establish telephone connection, the existing telephone jacks in your home may no longer work. Your cable/VoIP service provider uses a seperate cable connecting from the main line to the modem installed in your home.

To allow all existing telephone jacks to work, rewiring of the telephone line (as indicated by the dotted line in the illustration below) may be needed. Rewiring requires professional installation (fees may apply). Contact your cable/VoIP service provider for more information.

Conventional

OLD

Main

landline

telephone line jack

NEW

Main cable

line

Modem/Router/ Terminal adapter

Getting started

Telephone base layout

X/DELETE

Press to delete the message currently playing (page 44).

When the telephone is not in use, press twice to delete all previously reviewed messages (page 45).

IN USE light

Flashes when there is an incoming call, or another telephone sharing the same line is in use.

On when the handset is in use, or the answering system is answering a call.

/FIND HANDSET

Press once and then release to page all system handsets (page 22).

/ANS ON/OFF

Press to turn the answering system on or off (page 37).

/REPEAT

Press to repeat a message or press twice to play the previous message (page 44).

Message window

Shows the number of messages and other answering system information (page 47).

/SKIP

Press to skip to the next message (page 44).

/VOL and /VOL

Press to adjust the volume during message playback (page 44).

When the phone is not in use, press to adjust the telephone base ringer volume (page 12).

/PLAY/STOP

Press to play messages (page 44).

Press to stop message playback (page 44).

Getting started

Handset layout

CHARGE light

On when the handset is charging in the telephone base or charger (page 4).

/VOLUME

Press to enter the directory when the telephone is not in use (page 29).

Press to scroll up while in a menu, or in the directory, call log or redial list.

During a call or message playback, press to increase the listening volume (page 18 or page 44).

When entering numbers or names in the directory, press to move the cursor to the right.

MUTE/DELETE

While on a call, press to mute the microphone (page 19).

While using the dialing keys, press to delete digits or characters.

While the handset is ringing, press to silence the ringer temporarily (page 19).

While reviewing the redial list, directory or call log, press to delete an individual entry (pages 20, 29 and 36 respectively).

/FLASH

Press to make or answer a call (page 18). During a call, press to answer an incoming call when

you receive a call waiting alert (page 19).

While reviewing a call log entry, press repeatedly to add or remove 1 in front of the call log entry before dialing or saving it to the directory.

TONE

Press to switch to tone dialing temporarily when using the pulse service (page 19).

(speakerphone)

Press to make or answer a call.

During a call, press to switch between the speakerphone and the handset (page 18).

Getting started

Handset layout

MENU/SELECT

Press to show the menu.

While in a menu, press to select an item, or save an entry or setting.

CID /VOLUME

Press to review the call log when the telephone is not in use (page 34).

Press to scroll down while in a menu, or in the directory, call log or redial list.

During a call or message playback, press to decrease the listening volume (page 18 or page 44).

When entering numbers or names in the directory, press to move the cursor to the left.

OFF/CANCEL

During a call, press to hang up.

While the handset is ringing, press to silence the ringer temporarily (page 19).

While the telephone is not in use, press and hold to erase the missed call indicator (page 34).

While in a menu, press to exit to the previous menu or press and hold to exit to idle mode.

# (pound key)

Press repeatedly to show other dialing options when reviewing a call log entry (page 35).

Dialing keys

Press to enter numbers or characters.

INT (intercom) Press to start an intercom conversation or transfer a call

(pages 23-25).

REDIAL/PAUSE

Press to review the redial list (page 20).

While dialing or entering numbers into the directory, press and hold to insert a dialing pause.

Telephone settings

Using the menu

In the ringers menu, you can select the ringer tones and adjust the ringer volume for incoming calls.

In the settings menu, you can change and edit the settings for LCD language, voicemail indicators, key tone, date and time, home area code and dial mode.

Go to Answering system settings starting on page 37 for instructions on how to modify the answering system settings with a system handset shown in the table below.

Setting Page

Answer on/off 37

Announcement (play, record and delete) 38

Call screening 39

Number of rings 39

Remote access code 39

Message alert tone 40

Recording time 40

To enter the handset menu:

Press MENU/SELECT when the handset is not in use.

1. Press or until the screen displays the desired feature menu.

2. Press MENU/SELECT to enter that menu.

3. To return to the previous menu, press OFF/CANCEL.

• To return to idle mode, press and hold OFF/CANCEL.

•

Ringer volume (telephone base)

Press /VOL or /VOL on the telephone base to adjust the ringer volume when the telephone is not in use. When you set the ringer volume to zero, the base ringer is off and the system announces, “Base ringer is off.”

Telephone settings

Ringer volume (handset)

You can adjust the ringer volume or turn the ringer off.

Press MENU/SELECT when the handset is not in use.

1. Press or to select >RINGERS, then press

MENU/SELECT.

Press or to select >RINGER VOLUME, then press

MENU/SELECT.

Press or to adjust the volume. A sample of each ringer

4. volume plays as you scroll through the choices.

Press MENU/SELECT to save your selection. You hear a

5. confirmation tone.

The ringer volume also determines the ringer volume of

• the intercom calls and the volume of paging tone.

When the handset ringer volume is set to off, that handset is silenced for all

• incoming calls except paging tone and displays on the handset.

Unless the ringer volume is turned off on that handset, each handset rings

• when there is an incoming call.

Ringer tone

You can choose from different ringer tones.

Press MENU/SELECT when the handset is not in use.

Press or to select >RINGERS, then press

MENU/SELECT.

Press or to select >RINGER TONE, then press

MENU/SELECT.

Press or to select a desired ringer tone. A sample of

4. each ringer tone plays as you scroll through the choices.

Press MENU/SELECT to save your selection. You hear a

5. confirmation tone.

>RINGERS

SETTINGS

>RINGER VOLUME

RINGER TONE

RINGER VOLUME

>RINGER TONE

RINGER VOLUME

RINGER TONE >1

If you turn off the handset ringer volume, you will not hear ringer tone samples.If you turn off the handset ringer volume, you will not hear ringer tone samples.

Telephone settings

LCD language

You can select a language (English, French or Spanish) to be used in all screen displays.

Press MENU/SELECT when the handset is not in use.

Press or to select >SETTINGS, then press MENU/SELECT.

Press or to select >LCD LANGUAGE, then press

MENU/SELECT.

Press or to choose ENGLISH, FRANÇAIS or

ESPAÑOL. Press MENU/SELECT to save your selection. You hear a

5. confirmation tone.

>LCD LANGUAGE

CLR VOICEMAIL

LCD LANGUAGE >ENGLISH

Telephone settings

Clear voicemail indicators

If you subscribe to voicemail service offered by your telephone service provider, NEW VOICEMAIL and appear on the handset when you have new voicemail messages. Contact your telephone service provider for more information about using your voicemail service.

After you have listened to all new voicemail messages, the indicators on the handset turn off automatically.

Use this feature when the telephone indicates that there is new voicemail but there are none (for example, when you have accessed your voicemail while away from home). This feature only turns off the indicators; it does not delete your voicemail messages. As long as you have new voicemail messages, your

telephone service provider continues to send the signal to turn on the indicators.

To manually turn off these indicators:

Press MENU/SELECT when the handset is not in use.

1. Press or to select >SETTINGS, then press

MENU/SELECT.

Press or to select >CLR VOICEMAIL, then

3. press MENU/SELECT. The screen shows TURN OFF

INDICATOR?

Press MENU/SELECT to save your selection. You hear a

4. confirmation tone.

Your telephone service provider may alert you of new messages with a

••Your telephone service provider may alert you of new messages with a

• stutter (broken) dial tone. Contact your telephone service provider for details.

stutter (broken) dial tone. Contact your telephone service provider for details.

Voicemail is different from answering system messages recorded in your

• answering system. For more information about the difference, see page 41.

answering system. For more information about the difference, see page 41.

HANDSET 1

NEW VOICEMAIL

TURN OFF

3:15

INDICATOR?

12/25

Key tone

You can turn the key tone on or off.

Press MENU/SELECT when the handset is not in use.

Press or to select >SETTINGS, then press

MENU/SELECT.

Press or to select >KEY TONE, then press

MENU/SELECT.

Press or to choose ON or OFF.

Press MENU/SELECT to save your selection. You hear a

5. confirmation tone.

>KEY TONE

SET DATE/TIME

KEY TONE >ON

Telephone settings

Set date and time

The answering system announces the date and time of each message prior to playing it. If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. However, the year must be correct so that the day of the week can be calculated from the caller ID information. Before using the answering system, set the date and time.

Press MENU/SELECT when the handset is not in use.

Press or to select >SETTINGS, then press

MENU/SELECT.

Press or to select >SET DATE/TIME, then press

MENU/SELECT.

When the month is flashing, press or until the screen

displays the correct month. Press MENU/SELECT to confirm.

-OR-

Press the dialing keys (0-9) to enter the current month (for example, if the month is March, you must enter 03).

Repeat Step 4 to set the correct date and year and then

press MENU/SELECT to advance to set the time. Repeat Step 4 until the time is set. Press or to choose

AM or PM, or press 2 for AM or 7 for PM. Press

MENU/SELECT to save your selection. You hear a confirmation tone.

If the date and time are not set, the system announces, “Time and date not set,”

If the date and time are not set, the system announces, “Time and date not set,” before each message plays.

before each message plays.

>SET DATE/TIME HOME AREA CODE

SET DATE

11/20/10

SET TIME

10:30 PM

Telephone settings

Home area code

If you dial your local calls using only seven digits (area code not required), you can program your home area code so that when you receive a call within your local area, the telephone number is automatically stored without the area code in the call log.

Press MENU/SELECT when the handset is not in use.

Press or to select >SETTINGS, then press

MENU/SELECT.

Press or to select >HOME AREA CODE, then press

MENU/SELECT.

Use the dialing keys to enter the desired home area code.

Press MUTE/DELETE to delete a digit.

•

Press and hold MUTE/DELETE to delete the entire entry.

• Press MENU/SELECT to save the selection. You hear a confirmation tone.

If, in the future, your telephone service provider requires you to dial the area code

If, in the future, your telephone service provider requires you to dial the area code when making a local call, or, if you move to a location that requires it, delete the

when making a local call, or, if you move to a location that requires it, delete the home area code you have already programmed, following the steps above. After

home area code you have already programmed, following the steps above. After you have deleted the home area code, _ _ _ will appear in the display.

you have deleted the home area code, _ _ _ will appear in the display.

Dial mode

The default dial mode is tone dialing. If you have pulse (rotary) service, you need to change the dial mode to pulse dialing before using the telephone.

Press MENU/SELECT when the handset is not in use.

Press or to select >SETTINGS, then press

MENU/SELECT.

Press or to select >DIAL MODE, then press

MENU/SELECT.

Press or to choose TONE or PULSE.

Press MENU/SELECT to save your selection. You hear a

5. confirmation tone.

>HOME AREA CODE DIAL MODE

HOME AREA CODE

---

>DIAL MODE LCD LANGUAGE

DIAL MODE >TONE

Telephone operation

Make a call

Press /FLASH, then wait for a dial tone.

-OR-

Press to use the speakerphone, then wait for a dial tone.

Use the dialing keys to enter the telephone number.

Predial a call

Use the dialing keys to enter the telephone number (up to 30 digits).

Press and hold REDIAL/PAUSE to insert a dialing pause (a P appears).

•

Press MUTE/DELETE or OFF/CANCEL to make corrections.

• Press /FLASH or to call.

Answer a call

Press /FLASH, or any dialing key (0-9, TONE or #).

End a call

Press OFF/CANCEL or put the handset in the telephone base or charger.

The screen shows the elapsed time as you talk (in hours, minutes

The screen shows the elapsed time as you talk (in hours, minutes and seconds).

and seconds).

Speakerphone

During a call, press to switch between speakerphone and normal handset use. When the speakerphone is active, the handset shows SPEAKER and .

Volume

During a call, press /VOLUME or /VOLUME to adjust the listening volume. When the volume reaches the minimum or maximum setting, you hear two beeps.

The handset earpiece volume setting and speakerphone volume setting

The handset earpiece volume setting and speakerphone volume setting are independent.

are independent.

Telephone operation

Mute

The mute function allows you to hear the other party but the other party cannot hear you.

During a call, press MUTE/DELETE on the handset. The

1. handset displays MUTED for a few seconds and MUTE appears until the mute function is turned off.

Press MUTE/DELETE again to resume the conversation.

2. The handset screen temporarily shows

MICROPHONE ON.

Call waiting

When you subscribe to call waiting service from your telephone service provider, you hear an alert tone if there is an incoming call while you are on another call.

Press /FLASH to put the current call on hold and take the new call.

• Press /FLASH at any time to switch back and forth between calls.

•

Temporary ringer silencing

When the telephone is ringing, you can temporarily silence the ringer of the handset without disconnecting the call. The next call rings normally at the preset volume.

To silence the ringer:

When the telephone is ringing, press OFF/CANCEL or MUTE/DELETE on the handset, RINGER MUTED and show on the screen.

Temporary tone dialing

If you have dial pulse (rotary) dialing service only, you can temporarily switch from dial pulse to touch-tone dialing during a call.

During a call, press TONE .

1. Use the dialing keys to enter the number. The telephone sends

2. touch-tone signals.

The telephone automatically returns to pulse dialing mode after you end

3. the call.

3:15

MUTED

MUTE

12/25

Telephone operation

Redial list

Each handset stores the last 10 telephone numbers dialed. When there are already 10 redial entries, the oldest entry is

deleted to make room for the new entry. Entries are shown in reverse chronological order.

Review and dial a redial entry

Press REDIAL/PAUSE when the handset is not in use.

1. Press , or REDIAL/PAUSE repeatedly to browse. The

2. handset beeps twice at the beginning or end of the list.

Press /FLASH or to dial.

-OR-

Press /FLASH or and then wait for a dial tone.

1. Press REDIAL/PAUSE and then press , or REDIAL/PAUSE repeatedly

2. to browse.

When the desired entry displays, press MENU/SELECT to dial.

Store a number from the redial list to the directory

When the desired number in the redial list displays, press

MENU/SELECT twice.

Follow Step 3 to Step 6 in Create a new directory entry on page 28.

Delete a redial entry

Press REDIAL/PAUSE when the handset is not in use.

1. Press , or REDIAL/PAUSE repeatedly to browse to the desired entry.

2. Press MUTE/DELETE to delete the displayed number. You hear a

3. confirmation tone.

REDIAL

800-595-9511

+ 54 hidden pages