VIRTUFIT Water Resistance Row 800 User Manual
1
Water Resistance Row 800
EN
User Manual
VirtuFit Water Resistance Row 800
2
EN
INDEX
Safety instructions 3
Tool kit 4 - 5
Assembly instructions 6 - 9
Fill and empty the tank 10
Water level 11
Storage 12
Maintenance 12
Operating Guide 13-15
Exercise Guide 16-19
Technical drawing 20
Parts list 21-24
VirtuFit Water Resistance Row 800
3
EN
SAFETY INSTRUCTIONS
WARNING: Before beginning any exercise program, consult your physician.
This is especially importent for individuals over the age of 35 or persons with
pre-existing health problems. Read all instructions before using any
tness equipment. Save these instructions.
ATTENTION
- Before starting any exercise program you should consult your physician to determine if you
have any medical or physical conditions that could put your health and safety at risk or
prevent you from using the equipment properly. Your physician’s advice is essential if you are
taking any medication that may aect your heart rate, blood pressure, or cholesterol level.
- Be aware of your body’s signals. Incorrect or excessive exercise can damage your health.
Stop exercising if you experience any of the following symptoms: pain, tightness in your chest,
irregular heartbeat, shortness of breath, lightheadedness, dizziness, or feelings of nausea. If
you do experience any of these conditions, you should consult your physician before
continuing with your exercise program.
- Keep children and pets away from the equipment. The equipment is designed for adult use
only.
- Use the equipment on a solid, at level surface with a protective cover for your oor or carpet.
To ensure safety, the equipment should have at least 2 feet of free space all around it.
- Ensure that all nuts and bolts are securely tightened before using the equipment. The safety
of the equipment can only be maintained if it is regularly examined for damage and/or wear
and tear.
- Always use the equipment as indicated. If you nd any defective components while
assembling or checking the equipment, or if you hear any unusual noises coming from the
equipment during exercise, stop using the equipment immediately and don’t use the
equipment until the problem has been rectied.
- Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may
become entangled in the equipment.
- Do not place ngers or objects into the moving parts of the equipment.
- The maximum user weight of this rower is 140kg.
- This equipment is not suitable for therapeutic use.
- Move with caution when lifting and moving the equipment. Always use proper lifting technique
and seek assistance if necessary.
- Your product is intended for use in cool, dry conditions. You should avoid storage in extreme
cold, hot, or damp areas as this may lead to corrosion and other related problems.
- This equipment is designed for indoor use only! It is not intended for commercial use or medical
treatment!
VirtuFit Water Resistance Row 800
4
EN
CHECKLIST
NO. 1
NO. 54
NO. 54
NO. 12
NO. 43 L / R
NO. 39
NO. 100
NO. 101
VirtuFit Water Resistance Row 800
5
EN
CHECKLIST
#102 S4 - 1pc
#104 S13-17 - 2pc
#82 10 - 4pc
#65 M10*55 - 2pc
#75 M6*16 - 6pc
#81 10 - 2pc
#103 S5 - 1pc
#63 M0 X 115 - 1pc
#87 M10 - 1pc
#86 M10 - 2pc
VirtuFit Water Resistance Row 800
6
EN
I. Unfold the Front Support (2) away from the Main Frame (1);
II. Unfold the Upright (4) away from the Rail (3).
STEP 1
ASSEMBLY INSTRUCTIONS
Open the box and remove all parts from the packaging and place them on the oor.
Missing parts: If you think you are missing certain parts in your package, carefully check the styrofoa and
the treadmill. Some parts (bolts, screws, etc.) are already attached to / in the treadmill.
Error message: Make sure that all cables are carefully attached. The aluminum legs are very sensitive and
should remain straight. Do you get an error message after mounting your rowing machine? Then you
should bend these copper feet straight again, this may cause the error message to disappear.
Allen bolts: Make sure that the Allen key ts securely into the bolt before you apply force to the key. In
this way you prevent the head of the socket head from being turned.
1.
VirtuFit Water Resistance Row 800
7
EN
I. Bolt the Front Support (2) to the Main Frame (1) with Button Head Bolt ( M10 X 1.5 X 115mm)(63),
Washer(M10)(82), and Nylock Nut (M10 X 1.5)(87);
II. Attach the Upright (4) to the Front Support(2) with Button Head Bolt (M10 X 1.5 X 55mm)(65).
STEP 2
ASSEMBLY INSTRUCTIONS
VirtuFit Water Resistance Row 800
8
EN
I. There is an “L” decal on the left Pedal Cap(43L), and an “R” decal on the right Pedal Cap (43R);
II. Insert the Pedal Shaft (12) through the tube located on the Front Support (2);
III. Slide the right Pedal Cap (43R) onto the right side on the Pedal Shaft (12) and make it ride on the
Rack on the Front Support (2);
IV. Slide the left Pedal Cap (43L) onto the left side on the Pedal Shaft (12) and make it ride on the
Rack on the Front Support(2);
V. Then secure the Pedal Caps (43R, 43L) with Washers(M10)(82), Lock Washer (M10)(81), and Acorn
Nuts (M10 X 1.5)(86) at both ends of the Pedal Shaft (12);
VI. You need to use two combination Wrenches to tighten the Acorn Nuts (M10 X 1.5)(86) at both
ends of the Pedal Shaft(12) at the same time.
STEP 3
ASSEMBLY INSTRUCTIONS
Loading...