Virtufit TR-500I User Manual

Elite TR-500i Loopband

User manual

For questions or missing parts, please contact Fitness Benelux:

FITNESS	Twekkelerweg 263	T	[phone]
BENELUX	7553 LZ Hengelo	E	[e-mail]
Uw partner in fitness	The Netherlands	W www.fitnessbenelux.nl

ENG

INDEX

Index

Safety Precautions	P 3
Checklist	P 6
Assembly Steps	P 7
Folding Steps	P 17
Operation Instruction	P 19
App instructions	P 39
Tips for Stretching	P 42
Maintenance	P 43
Explosive drawing	P 44
Part list	P 46

	2		Elite TR-500i Treadmill
		ENG

SAFETY PRECAUTIONS

Thank you for purchasing this treadmill, it has been designed and manufactured to give you many years of trouble free service. You may already be familiar with using a similar product but please take the time to read these instructions which have been written to ensure that you get the very best from your purchase.

WARNING

-To reduce the risk of serious injury, read the following important warnings before using the treadmill.

-Before starting any exercise program you should consult your doctor to determine if you have any physical or health conditions that could create a risk to your health and safety, or prevent you from using the treadmill properly. Your doctor’s advice is essential if you are taking medication that affects your heart rate, blood pressure or cholesterol level.

-Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop exercising if you experience any of the following symptoms: Pain, tightness in your chest, irregular heartbeat, extreme shortness of breath, feeling light-headed, dizzy or nauseous. If you do experience any of these conditions you should consult your doctor before continuing with your exercise program.

ELECTRICAL SAFETY PRECAUTIONS

Failure to observe the following warnings may increase the risk of an electric shock and personal injury.

-Always check the power cable for damage prior to use. If any damage is observed, do NOT use the power cable.

-Never touch the power cable with wet hands.

-Position the power cable so that it cannot be walked on or pinched.

-Only the supplied power cable should be used with the treadmill.

	Elite TR-500i Treadmill		3
		ENG

SAFETY PRECAUTIONS

GENERAL SAFETY PRECAUTIONS

-Use the treadmill only in the way described in this instruction book.

-Ensure that the voltage of the electrical supply is the same as that indicated on the power cable

-It is the responsibility of the owner to ensure that all users of the treadmill are adequately informed of all warnings and safety precautions.

-The treadmill is heavy and should be removed from the packaging and assembled by two people.

-Before assembling the treadmill, make sure that it is not plugged into any electrical source, such as a wall socket.

-Use the treadmill on a solid, flat level surface with a protective cover for your floor or carpet. Position the treadmill with at least 2 meters * 1 meter of free space behind the treadmill.

-Keep the treadmill away from excessive moisture and dust.

-Before using the treadmill, check the nuts and bolts are securely tightened.

-The safety level of the treadmill can be maintained only if it is examined regularly for damage and wear. Replace defective components immediately. Do not use the treadmill until they have been replaced.

-The treadmill has been tested and certified to EN957 under class H.C. Suitable for domestic, home use only.

-Braking is controlled by the belt rotation power supply.

-The treadmill is not suitable for therapeutic use.

-Keep children and pets away from the treadmill. The treadmill is designed for adult use only.

-Wear suitable clothing whilst using the treadmill. Avoid wearing loose clothing which may get caught in the treadmill or clothing that may restrict or prevent movement.aerobic schoenen met rubberen zolen.

	4		Elite TR-500i Treadmill
		ENG

SAFETY PRECAUTIONS

-Do not arch your back when using the treadmill; always try to keep your back straight.

-If you feel pain or dizziness while exercising, stop immediately and cool down.

-The pulse sensor is not a medical device. Several things including user movement, may affect the accuracy of the sensor.

The sensor is intended only as an exercise aid in determining general heart rate trends.

-Care must be taken when lifting or moving the treadmill so as not to injure your back. Always use proper lifting techniques

and/or use assistance.

-A safe key is supplied for personal safety. Use the safe key when operating the treadmill for the emergency dismount function. In the event of an emergency, place both hands on the handlebars and put your feet onto the non-slip surface of the main frame. As you do this, the safe key will disengage from the computer and the emergency dismount function will be triggered.

-All moveable accessories require weekly maintenance. Check them before use every time. If anything is broken or loose, please fix it immediately. You may continue using the treadmill after any damaged parts have been fixed.

-The treadmill is not to be used by children or persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given adequate supervision or instruction.

-Supervised children using the treadmill must not be allowed to play with the treadmill.

-This machine must be well earthed. It can decrease the danger of electric shock .

	Elite TR-500i Treadmill		5
		ENG

CHECKLIST

TOOL KIT

Please check the package list carefully before assembly.

Toolkit:

NR.	DESCRIPTION	SPECIFICATIONS	QTY
A	Mainframe		1
B	Monitor		1
C	iPad holder	(optional)	1
B01	Bottle holder		1
B08	Cross solid wrench		1
B09	5# Allen wrench	5mm	1
B15	Solid wrench	19mm	1
C05	Left foam handlebar		1
C06	Right foam handlebar		1
D07	Safety key module		1
C14	Left bottom cover		1
C15	Right bottom cover		1
E13	Bolt	M8*15	10
E22	Bolt	M5812	6
E32	Lock washer	8	10
E39	Big flat washer	Φ5*φ13*1.0	4

Assembly tools:
5# Inner hex wrench	5mm	1pc
Cross solid wrench	S=13 14 15	1pc
Solid wrench	19mm	1pc

Attention: please don`t switch on before finish assembling.

	6		Elite TR-500i Treadmill
		ENG

ASSEMBLY STEPS

STEP 1

Open the package and put the mainframe A on the floor.

Attention: Don’t open the packing belt (P) before set up of the treadmill

	Elite TR-500i Treadmill		7
		ENG

ASSEMBLY STEPS

STEP 2

Lift up column A06,A07 first;

Fix the column A06 to the mainframe A with bolt E13 and lock washer E32 by 5# Allen wrench B09 . Fix the column A07 to the mainframe according to the steps above.

ATTENTION: Support the column with hand to avoid falling down.

	8		Elite TR-500i Treadmill
		ENG

ASSEMBLY STEPS

STEP 3

Connect the monitor cable D03 with D04. Fix the monitor B to the left and right column A06\A07 with bolt E13 and lock washer E32 by 5# Allen wrench B09.

Attention: Please make sure cables are well connected before fasten.

	Elite TR-500i Treadmill		9
		ENG

ASSEMBLY STEPS

STEP 4

Attach the tablet holder (C) to the console (B) using the wrench (B15). The tablet holder is optional and can be omitted if you wish.

Note: First, manually confirm the screw holder (B12) of the tablet holder in the console (B) and then tighten it with nut B13 and wrench B15.

	10		Elite TR-500i Treadmill
		ENG

ASSEMBLY STEPS

STEP 5

Fix the left and right foam handlebar C05\C06 to the monitor B with bolt E22 and big washer E39 by cross solid wrench B08

	Elite TR-500i Treadmill		11
		ENG

ASSEMBLY STEPS

STEP 6

Attach the left and right cover (C14 / C15) to the frame. Make sure everything is well confirmed.

	12		Elite TR-500i Treadmill
		ENG

ASSEMBLY STEPS

STEP 7

Fix the bottle holder B01 to the right column A07 with bolt E22 by solid cross solid wrench B08.

	Elite TR-500i Treadmill		13
		ENG

ASSEMBLY STEPS

STEP 8

Before running, please nip the safety key clip D07 with your cloth.

For any emergency, please pull the safety key rope , and the machine will stop.

	14		Elite TR-500i Treadmill
		ENG

ASSEMBLY STEPS

STEP 9

Remove bolt M8 * 15 (E13) at the bottom of the steel cable (E) with 5 # inner wrench lock B09.

	Elite TR-500i Treadmill		15
		ENG