VIRTUFIT Elite TR-1000i User Manual

Elite TR-1000i Treadmill

ENG

User manual

ENG

VirtuFit Elite TR-1000i Treadmill

2

INDEX

Safety instructions 3-4

Checklist 5-6

Assembly instructions 7-11

Folding instructions 12-13

Maintenance treadmill 14-15

Problem solutions 16

Control panel 17-23

Kinomap 24

Program speed table 25-26

Training instructions 27

Exploded drawing 28

Part list 29-32

ENG

VirtuFit Elite TR-1000i Treadmill

3

SAFETY INSTRUCTIONS

WARNING: We suggest that you should consult with your health professional before

starting your workout, especially for the age up to 35 old or people

with health problems. We do not take responsiblity for any problems or injuries if you

don’t follow our instructions.

– Ensuring the safety clamps were attached to the clothing or belts before using the treadmill.

– Please do not insert any items to any part of the equipments, which would damage the equipment.

– Position the treadmill on a clear, level surface. Do not place the treadmill on thick carpet as it may

interfere with proper ventilation. Do not place the treadmill near water or outdoors.

– Never start the treadmill while you are standing on the walking belt. After turning the power on and

adjusting the speed control, there may be a pause before the walking belt begins to move, always

stand on the foot rails on the sides of the frame until the belt is moving.

– Wear appropriate clothing when exercising on the treadmill. Do not wear long, loose tting clothing

that may be caught in the treadmill. Always wear running or aerobic shoes with rubber soles.

– Keep the children and pets away from the treadmill while starting workout.

– Don’t exercise in 40 minutes after dinner.

– The equipment is suitable for adults, children need be accompanied with adults while workout.

– You must hold on to the handrails until you become comfortable and familiar with the treadmill

when it is your rst workout.

– Treadmill is indoor-using equipment, not outdoor-using for avoiding damage. Keep the store-place

clean and at, drying. Prohibiting the other purpose using, only for workout.

– Please purchase the power-line to the distributor or contact with our company directly, for the

powerline only equip to the treadmill.

ATTENTION

ENG

VirtuFit Elite TR-1000i Treadmill

4

SAFETY INSTRUCTIONS

– The treadmill is for indoor and not outdoor use to prevent damage on the product. Keep the storage

area dry, clean and at. It is forbidden to use the device for other purposes than before training.

– Only use the power cable supplied by the supplier for the treadmill. If the cable is missing, please

contact our company.

– If the treadmill should suddenly increase in speed due to an electronics failure or the speed being

inadvertently increased, the treadmill will come to a sudden stop when the pull pin is disengaged

from the console.

– Do not connect line to the middle of cable; do not lengthen cable or change the cable plug; do not

put any heavy thing on cable or put the cable near the heat source; forbid using socket with several

holes, these may cause re or people may be hurt by the power.

– Cut o the power when the equipment is not used. When the power is cut o , do not pull the

power line to keep the wire unbroken. Insert the plug to the socket with the safety ground circuit,

for the power-line is professional equipment .You must contact with the professional people directly

while the line is damaged.

– This Treadmill only for home-using, the max user weight is 155 KGS.

– Please keep the space at least 1 X 2 meter at the end of base frame to escape any accidents!

ENG

VirtuFit Elite TR-1000i Treadmill

5

CHECKLIST

TOOL KIT

Main Frame

Display

Manual

Upright Post Frame ( L & R )

Base frame cover

Hardware bag

Safety key

Console

Console rear cover

Silicon oil

ENG

VirtuFit Elite TR-1000i Treadmill

6

CHECKLIST

TOOL KIT

Allen C.K.S half thread screw (M8*60*20 ) 4cps

Philips C.K.S. self-taping screw ( ST4*16 ) 4 pcs

Allen C.K.S full thread scw ( M8*15 ) 8pcs

Allen C.K.S half thread screw ( M8*30*20) 2pcs

Allen C.K.S full thread screw ( M8*20 ) 2pcs

T shaped wretch ( S6 ) 1 pcs

Philips C.K.S self-taping screw ( ST4*12 ) 2pcs

Cross Wrench 1pcs

ENG

VirtuFit Elite TR-1000i Treadmill

7

ASSEMBLY INSTRUCTIONS

Missing parts: If you think you are missing certain parts in your package, carefully check the styrofoa and

the treadmill. Some parts (bolts, screws, etc.) are already attached to / in the treadmill.

Socket screws: The treadmill contains socket screws, make sure that the allen key is rmly in the bolt

before you apply force to the key. In this way you prevent the head of the socket head screw from being

rotated.

– Take out the machine from box and put in on a at oor;

– Connect communication wire of the console with the right upright post. Insert the left and

right upright post on the base frame, and then x the each upright post with 2pcs M8*60*20

screw and 1pc M8*20 screw.

STEP 1

ENG

VirtuFit Elite TR-1000i Treadmill

8

– Fold up the treadmill, (Note: Before assemble the base frame cover, please ensure the screws

for base frame and upright post are xed completely);

– Put the base frame covers in the left and right side of upright post, then clip-on

the covers together;

– Last, x the covers by 1pc ST4*12 screw.

STEP 2

ASSEMBLY INSTRUCTIONS

ENG

VirtuFit Elite TR-1000i Treadmill

9

– Insert the console on the upright post. See above picture. (Note: Please connect the

communication cables in the right handlebar and upright post, avoid damaging the cable);

– Use 2pcs M8*15 screw to x each upright post, and then use 1pc M8*30*20 screw to x the hole

under each handlebar. (Note: The screw M8*30*20 is for adjusting the handlebar, it can not be

xed tightly, or else the tube will be damaged).

STEP 3

ASSEMBLY INSTRUCTIONS

ENG

VirtuFit Elite TR-1000i Treadmill

10

– Put the display on the console, and lock the two parts together with 4pcs M8*15 screw.

STEP 4

ASSEMBLY INSTRUCTIONS