VIRTUFIT Elite FDR 2.5i Semi-Pro Crosstrainer User Manual
Elite FDR 2.5i Semi-Pro Crosstrainer
User Manual
ENG
2
VirtuFit Elite FDR 2.5i Semi-Pro Crosstrainer
NL
INDEX
Safety Caution 3
Checklist 4
Assembly Intructions 5-11
Maintenance 12
Computer Manual 13-19
App Possibilities 20
Exploded Drawing 21
Parts List 22-25
ENG
ENGENG
3
VirtuFit Elite FDR 2.5i Semi-Pro Crosstrainer
NL
SAFETY CAUTION
WARNING: BEFORE YOU BEGIN YOUR WORKOUT, WE RECOMMEND THAT YOU
FIRST CONTACT YOUR HEALTH SPECIALIST, ESPECIALLY FOR PEOPLE OVER 35
OR PEOPLE WHO ALREADY SUFFER FROM HEALTH PROBLEMS. WE ARE NOT
LIABLE FOR ACCIDENTS IF YOU DO NOT FOLLOW OUR INSTRUCTIONS.
- The crosstrainer is only made for home use and is suitable for users up to 165kg.
- Carefully follow the steps of assembly.
- Use only original parts that are supplied.
- After delivery, check everything with the parts list before you start assembling.
- Only use suitable tools for assembly and ask for help where necessary.
- Place the crosstrainer on a at surface and a sti surface. Use in damp rooms is not recommended.
- Check all parts for tightness before you train for the rst time. We also recommend checking the
parts every month. Replace broken parts immediately and do not use the cross trainer if you have
not yet replaced the part. Only use original spare parts for repair. Ask your dealer for advice on
repairs.
- Avoid using aggressive cleaning agents when cleaning the crosstrainer.
- Start training only after the cross trainer has been fully assembled and checked.
- Be aware that all adjustable parts have a maximum number of settings to which they can be
adjusted.
- The crosstrainer is made for adults. Make sure that children only use it when accompanied by an
adult.
- Inform users of potential danger, watch out for moving parts during use.
- Warning: improper / excessive training can cause injuries.
ATTENTION
ENG
4
VirtuFit Elite FDR 2.5i Semi-Pro Crosstrainer
NL
CHECKLIST
ENG
5
VirtuFit Elite FDR 2.5i Semi-Pro Crosstrainer
NL
ASSEMBLY INSTRUCTIONS
Missing parts: If you think you are missing certain parts in your package, carefully check the styrofoam
and the device yourself. Some parts (bolts, screws, etc.) are already attached to / in the device.
Error message: Make sure that all cables are carefully attached. The aluminum legs are very sensitive and
should remain straight. Do you get an error message after the installation of your cross trainer? Then you
should bend these aluminum feet straight again, this may cause the error message to disappear.
Transport wheels: Make sure that the transport wheels are attached to the front of the device.
Allen screws: In the uprights of cross trainers are hex bolts, make sure that the Allen key is rmly in the
bolt before you apply force to the key. In this way you prevent the head of the socket head from being
turned
ENG
6
VirtuFit Elite FDR 2.5i Semi-Pro Crosstrainer
NL
STEP 1
– Connect the motor communication wire (61) with Upright post comunication wire (76);
– Attach the upright post (2) to the main frame (1) with Allen cylinder head full thread
screw (30), Flat washer (50) and Spring washer (53).
ASSEMBLY INSTRUCTIONS
ENG
7
VirtuFit Elite FDR 2.5i Semi-Pro Crosstrainer
NL
– Attach the pulse circular tube (7) to the upright post (2) with Allen cylinder head full
thread screw (30), Flat washer (50);
– Assemble the handlebar cover (104) with Philips pan head full thread screw (118).
STEP 2
ASSEMBLY INSTRUCTIONS
ENG
8
VirtuFit Elite FDR 2.5i Semi-Pro Crosstrainer
NL
ASSEMBLY INSTRUCTIONS
STEP 3
STEP 4
– Insert the bottle holder (88) into the console (87).
– Connect upright post (2) with console (87) communication wire;
– Attach the console (87) to upright post (2) with the Philips C.K.S. self-tapping screw (45).
ENG
Loading...