Vieta HCS80B User Manual
SAFETY INFORMATION
SPECIFICATIONS
!!
CAUTIONCAUTION
RISK OF ELECTRIC SHOCKRISK OF ELECTRIC SHOCK
DO NOT OPENDO NOT OPEN
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL,
WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED
TO ALERT THE USER TO THE PRESENCE OF
UNINSULATED, DANGEROUS VOLTAGE , WITH IN THE
PRODUCTS ENCLOSURE THAT MAY BE OF SUFFICIENT
MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC
SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL
TRIANGLE IS INTENDED TO ALERT THE USER TO THE
PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
""
!!
1.Power Supply..................................................................... AC 230V/50Hz
2.Total Power Consumption..................................................................... 80W
3.Input Sensitivity (Subwoofer)..................................................200mV 20mV
4.Input Sensitivity (Satellite)......................................................550mV 50mV
5.Speaker Impedance (Subwoofer).........................................................8 Ohm
6.
Speaker Impedance (Satellite)..............................................................8 Ohm
S/N (A Weight)........................................................................................80dB
7.
8.Subwoofer Power Output (MAX)......................................... .40W
9. Power Output (MAX)...........................................
Satellite ..................2x20W
10.THD (1kHz, 1W)....................................................................................0.5%
11.Frequency Response..................................................... 45Hz~20KHz 5dB
12.L/R Separation (1kHz)...........................................................................30dB
13.L/R Balance (Stereo)............................................................................. 2dB
......
...
..................
Safety Precautions
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK. DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
1
Note: Specifications are subject to change for improvements.
10
OPERATION
IMPORTANT SAFEGUARDS
A. Switch On/Off the Product
1. Before turning on the system, please connect it according to
the System Connection Instruction.
2. Connect AC power supply with this product.
(Caution: Power source must be consistent with this product.) (Caution: Power source must be consistent with this product.)
3. Press on the POWER switch button on the Rear Panel of the main
unit to switch on the system, the standby indicator will light up.
Then press the STANDBY button on the remote controller to enter
The normal status. Press the button on the remote controller once
again to keep power in standby status.
B. VOLUME Selection
1. Press the VOL+ on the front panel of the main turn-knob
or VOL + button on the remote controller to maximizeUnit the
sound output.
2. Press the VOL- on the front panel of the main turn-knob
or VOL - button on the remote controller to minimizeunit the
sound output.
C. MUTE Selection
1. Press the MUTE button on the remote controller once to
keep the performance silent.
D. RESET
Press the RESET button on the remote controller and it will reset
Caution: Please read carefully all the following important safeguards to ensure safe operation.
1. Read Instructions - All the safety and operating instructions should be
read before the appliance is operated.
2. Retain Instructions - The safety and operating instructions should be
retained for future reference.
3. Follow Instructions - All operating instructions should be followed.
4. Heed Warnings - All warnings on the appliance and in the operating
instructions should be adhered to.
5. Power Source - The appliance should be connected to a power supply
only of the type specified in the operating instructions or as marked on
the appliance.
6. Power-cord Protection - Power-supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon or
against them, pay particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the appliance.
7. Water and Moisture - The appliance should not be used near water
(for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a
wet basement, or near a swimming pool, etc.)
8.Ventilation - The appliance should be situated so that its location or
position does not interfere with its proper ventilation. Do not use the
appliance on a bed, sofa, rug or similar surface that may block the
ventilation openings.
all settings including SW Speaker output, Front Speaker output ,
CENTER Speaker output, Surround Speaker output to Factory
Default settings.
9
2
Loading...