Verizon Jetpack 7730I Mifi Setup Manual

Choose 2 Rent

Phone [phone]
Fax [phone]

[e-mail]

www.choose2rent.com

version C2R-1 2018

page 1 of 2

Verizon Jetpack 7730I Mifi

Setup Guide

Power on your Jetpack by pressing and holding the power button until the

display lights and Home scren displays

Connection Option 1:

Manual SSID Wifi Connection

1. Connect your device to the SSID/Password provided on the back label

2. You can also view SSID/Password information by

3. Tap Menu to display a list of Menu options

4. Select Wi-Fi

5. You can also view this information on the label located in back of the

MiFi

page 2 of 2

Connection Option 2:

WPS Connection

1. Tap Menu to display a list of Menu options

2. Select Wi-Fi

3. Select Wi-Fi Protected Setup (WPS)

4. Select Join Primary Network

5. Select Push Button to begin pairing

6. Go to desired device and select WPS to pair both devices

7. A message will appear stating Device connected as soon as the device

pairs

You can confirm a device has been connected by navigating to the
Connected Devices Menu

Charging Your Verizon Jetpack

Use the QuickCharge power adapter and plug the small USB (Type-C) end
into the bottom of the Jetpack. Plug the large USB into the provided USB
adapter and plug into the wall socket.

Please note: If you are charging the Jetpack while using the network data, you must enable
on the screen Internet access via USB and Wi-Fi to continue to use data. If this is not
enabled, your Wi-Fi connection will drop.

Please call our support team if you need assistance

setting up your rental devices

1(800) 622-6484