We want you to know all about your new Telephone,how
to install it, the features it provides, and the services you can
expect from its use. We have included this information in
your Owner’s Instruction Manual.
PLEASE READ BEFORE INSTALLING
AND USING YOUR NEW TELEPHONE EQUIPMENT.
Table Of Contents
IMPORTANT SAFETY INSTRUCTIONS ................................ 5
TELEPHONE PART IDENTIFICATION ................................. 7
Always follow basic safety precautions when using your telephone equipment to reduce
the risk of fire, electrical shock, and injury.
1.Read and understand all instructions in the Owner’s Instruction Manual.
2.Read all warnings and follow all instructions marked on the product.
3.Unplug this product from the wall outlet before cleaning. Use a damp cloth for
cleaning. Do not use liquid or aerosol cleaners.
4.Do not use the telephone near water. For example, do not use near a bathtub, wash
bowl, kitchen sink, laundry tub, swimming pool, or in a wet basement.
5.Do not place this product on an unstable cart or stand. The product may fall
causing serious damage to the product.
6.Use only the type power source indicated on the label. If you are not sure of the
type power supply to your home, consult your dealer or local power company.
7.Do not place any objects on the telephone line cord. Do not locate the telephone
where the line cord will be walked on.
8.Do not block or cover ventilation slots and openings in the bottom of the telephone.
The openings should never be blocked by placing the telephone on a bed, sofa, rug,
or other similar surfaces. The telephone should never be placed near or over a radiator
or heat register. The telephone should never be placed in a built-in installation unless
proper ventilation is provided.
9.Never spill liquid on the telephone or push objects of any kind through
ventilation slots. Liquid or objects may touch dangerous voltage points or short out
parts that could result in a risk of fire or electrical shock.
10.Do not disassemble this product. Opening or removing covers may expose you to
dangerous voltages or other risks. Incorrect reassembly can cause electrical shock
when the product is subsequently used.
11.Do not overload outlets and extension cords. Some telephones require AC power
from an outlet. Overloading the outlets can result in the risk of fire or electric shock.
12.Avoid using a telephone during a local thunderstorm. There may be a remote risk
of electrical shock from lightning.
13.Do not use a telephone to report a gas leak in the vicinity of the leak.
5
14.Unplug the telephone from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
•When the line cord is frayed or plugs damaged.
•If liquid has been spilled into the telephone.
•If the telephone has been exposed to rain or water.
•If the telephone does not operate properly by following the operating
instructions. (Adjust only those controls covered by the operating
instructions. Improper adjustment of other controls may result in
damage and will often require extensive work by a qualified
technician to restore the product to normal operation.)
•If the telephone has been dropped or the housing damaged.
•If the telephone exhibits distinct change in performance.
SAVE THESE INSTRUCTIONS
6
TELEPHONE PART IDENTIFICATION
1 Headset Button14 Clear Message Butt on
2 Call Waiting Off Button15 Enter Button
3 Pause Button16 LCD Contrast Button
4 Flash Button17 M emory Buttons
5 M ute Button18 Hold Button
6 End Call Button19 Line 1 Button
7 Call Forward On/Off Button20 Line 2 Button
8 Hookswitch21 Conference Button
9 Direction Buttons22 Redial Button
10 M enu Button23 Speaker On/Off Button
11 Delete Button24 Shift Button
12 Save Button25 Volume Up Button
13 M essage Button26 Volume Down Button
7
TELEPHONE PART IDENTIFICATION
1D a t a J a c k ( L in e 2 /D a t a J a c k )
2R i n ge r 1 V o lu m e S w it c h
3R i n ge r 2 V o lu m e S w it c h
4L in e 1 /2 J a c k
5A C A d a p t e r J a c k
6H e a d s e t J a c k
7H a n d s e t J a c k
Back and Side
8
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.