Vega CVE-18s operation manual
CVE-SERIES MANUAL
CVE-10, CVE-12, CVE-15, and CVE-18s
Powered Loudspeakers
Instruction Manual (English)
CERWIN-VEGA PROFESSIONAL
To avoid injury, read all operating instructions and safety information in this
manual before using the speaker.
Failure to follow these safety instructions could result in fire, electric shock, or
other injury or damage to the speaker or other property.
Contents
IMPORTANT SAFETY INSTRUCTIONS ....................................................................................................................................... 3
REGULATORY CERTIFICATION ................................................................................................................................................. 5
Introduction ............................................................................................................................................................................ 6
Before you begin ..................................................................................................................................................................... 6
Quick Start ............................................................................................................................................................................... 7
Loudspeaker Placement .......................................................................................................................................................... 7
Rear Panel – Mixer – CVE-10, CVE-12, CVE-15 ........................................................................................................................ 8
Rear Panel – Mixer – CVE-18s ................................................................................................................................................. 9
Using the CVE-10/12/15 as a floor/stage monitor................................................................................................................ 10
Application #1 – Using a single CVE-10, CVE-12, or CVE-15 ................................................................................................. 12
Application #2 – Connecting a second CVE-10, CVE-12, or CVE-15 using MIXED OUTPUT .................................................. 13
Application #3 – Connecting a CVE-18s to a CVE-10, CVE-12, or CVE-15 using Channel Outputs ........................................ 14
Application #4 – Daisy-Chain ................................................................................................................................................ 15
Application #5 – Large Venue/Front of House ...................................................................................................................... 16
Wall/Ceiling mounting CVE tops ........................................................................................................................................... 17
Protective Grill ...................................................................................................................................................................... 18
Troubleshooting .................................................................................................................................................................... 19
Care and Maintenance .......................................................................................................................................................... 21
Cable Connections ................................................................................................................................................................ 21
Warranty ............................................................................................................................................................................... 23
How to Obtain Warranty Service .......................................................................................................................................... 25
2
CERWIN-VEGA PROFESSIONAL
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence
of uninsulated dangerous voltage within the unit’s enclosure that may be of sufficient magnitude to constitute a risk of electric
shock.
WARNING: The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the product.
NOTE: The hand within an equilateral triangle is intended to alert the user to specific guidance and information regarding the
operation of the unit and should be read fully before using the unit for the first time.
CAUTION: To reduce the risk of fire or electric shock, do not remove any covers or open the unit. There are no user-serviceable
parts inside. All servicing should be referred to qualified service engineers.
a) Read and follow all the safety and operating instructions before connecting or using this product.
b) Retain this user manual for future reference.
c) All warnings on the unit and its packaging should be read and followed.
CAUTION: To reduce the risk of fire or electric shock, do not expose this product to rain, moisture, dripping, or splashing. Do not
place objects containing liquid (such as vases or glasses) on the unit. Do not use this product near water, such as a bath tub or
swimming pool. Unplug the unit from the wall outlet before cleaning. Never use thinner, cleaning fluids, solvents, or chemically
impregnated cloths. For cleaning, always use a soft dry cloth. Unplug the unit during lightning storms or when it is unused for
long periods of time.
CAUTION: The unit should be installed so that its location or position does not interfere with its proper ventilation. For example,
it should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings. It should not be placed
within a built-in installation (such as a bookcase or cabinet) that may impede the flow of air through its ventilation openings
and/or fan assembly. The unit should be situated away from heat sources such as radiators, heat registers, stoves, or other devices
(including amplifiers) that produce heat. Naked flame sources, such as lighted candles, should not be placed on or near the unit.
WARNING: Do not place the unit on an unstable surface, cart, stand, tripod, bracket, or table. The unit may fall, causing serious
injury to a person and serious damage to the unit. Use only with a cart, stand, tripod, bracket, or table recommended by the
manufacturer. Any mounting of the device on a wall or ceiling should follow the manufacturer’s instructions and should use a
mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with
care. Quick stops, excessive forces, and uneven surfaces may cause the appliance and cart combination to overturn.
When a cart is used, use caution when moving the cart/unit combination to avoid injury from tipping.
NOTE: Should the unit become damaged beyond repair or reach the end of its life, please consult the regulations regarding
disposal of electronic products in your region.
NOTE: Cerwin-Vega cannot be held responsible for damage caused by improper use of the unit and/or the applications provided
for use with the unit.
The unit shall be connected to a mains socket outlet with a protective ground (earth) connection.
3
CERWIN-VEGA PROFESSIONAL
IMPORTANT SAFETY INSTRUCTIONS (continued)
1. The unit and power supply should only be connected to a power outlet that matches the voltage and frequency marked on the
rear of the unit.
2. Protect the power cable from being walked on or pinched, particularly at plugs, convenience receptacles, and exit points on
the unit.
3. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than
the other. A grounding-type plug has two blades and a third grounding prong provided for your safety. If the provided plug does
not fit into an outlet, consult a qualified electrician for replacement of the obsolete outlet.
4. If the mains plug supplying this product incorporates a fuse, then the fuse should be replaced only with one of identical or lower
rupture value.
5. Never use a damaged or frayed power cable; this can cause risk of exposure to lethal voltages.
6. The power cable of the unit should be unplugged from a wall outlet when it will not be used for a long period of time.
7. Only use attachments/accessories specified by the manufacturer.
8. To completely disconnect the power input, the mains plug of the speaker should be disconnected from the mains connection.
9. The mains plug of the unit should not be obstructed, so that it can be easily accessed during intended use.
DO NOT ATTEMPT SERVICING OF THIS UNIT YOURSELF. REFER TO QUALIFIED SERVICE PERSONNEL FOR SERVICING.
In the event that servicing is needed, make sure that any replacement parts used have the same characteristics as the original
parts and that routine safety checks have been performed to guarantee that the equipment is in safe operating condition.
REPLACEMENT WITH INCORRECT PARTS MAY RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER HAZARDS.
The unit should be serviced by qualified service personnel when any of the following happens:
– The power cord or the plug has been damaged.
– Objects have fallen onto or liquid has been spilled into the unit.
– The unit has been exposed to rain or liquids of any kind.
– The unit does not appear to operate normally or exhibits a marked change in performance.
– The device has been dropped or the enclosure has been damaged.
Keep speakers out of extended or intense direct sunlight; the driver suspension could prematurely dry out, and finished surfaces
may become degraded.
The speaker contains sensitive components. Do not drop, disassemble, open, crush, bend, deform, puncture, microwave,
incinerate, paint, or insert foreign objects into speaker.
The speaker is easily capable of generating sound pressure levels (SPL) sufficient to cause permanent hearing damage. Caution
should be taken to avoid prolonged exposure to SPL in excess of 90 dB(A).
Operate and store the speaker in a place where the temperature is between -20° and 55°C (-4° and 131°F). Low or high
temperature conditions might cause the speaker to temporarily stop working. Avoid dramatic changes in temperature or humidity
when using the speakers, as condensation may form within the speaker.
Turn the speaker off when in any area with a potentially explosive atmosphere. Obey all signs and instructions, as sparks in such
areas could cause an explosion or fire resulting in serious injury or death. Areas with potentially explosive atmosphere are often,
but not always, marked clearly. Potential areas include fueling stations, areas where the air contains chemicals or partials
(including grain dust or metal particles), below deck on boats, and chemical transfer storage facilities.
The speaker contains small parts which may present a choking hazard to small children. Keep the speaker and its accessories
away from small children.
4
CERWIN-VEGA PROFESSIONAL
REGULATORY CERTIFICATION
Cerwin-Vega declares under sole responsibility that this product, to which this declaration relates, is in conformity with the following
standards:
The Declarations of Conformity can be obtained from Gibson Europe BV - Kamerlingh Onnesweg, 2 - 4131 PK Vianen - The Netherlands
Tel : +31 347 32 40 10 - Fax : +31 347 32 40 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
FCC ID: 2AL2V-PL0001 – CVE-10/12/15; FCC ID: 2AL2V-PL0001 – CVE-18s
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, radiates radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception (which can be determined by turning the equipment
off and on), the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
5
CERWIN-VEGA PROFESSIONAL
Introduction
Congratulations! Welcome to the Cerwin-Vega family! You’ve joined a growing group of audio professionals who have
turned to Cerwin-Vega for the most advanced audio reproduction systems available. All Cerwin-Vega products are
thoroughly tested to ensure that they meet or exceed our performance specifications. Backed by the best service in the
industry, Cerwin-Vega is dedicated to quality and reliability. For a complete overview of Cerwin-Vega products and
services, visit www.cerwin-vega.com
Before you begin
This manual covers the CVE-Series active speakers: the CVE-10, CVE-12, and CVE-15 (referred to as “tops”) and the CVE18s (referred to as a “sub”). These speakers are designed for portable applications (such as being mounted on a tripod
stand or pole mount or stacked directly on a floor, stage, or stable platform) and fixed installations (such as being
mounted using the wall/ceiling mount accessory shown on Page 17). These speakers are not intended for fixed
installation in high-moisture or outdoor environments, as moisture can cause corrosion of electrical contacts and
damage the speaker cone or surround. Cerwin-Vega does not support suspension of the subwoofer model covered in
this manual.
Cerwin-Vega speakers can generate considerable vibrational energy. When placed on a slippery surface such as polished
wood or linoleum, the speaker may move due to its own mechanical vibration. Precautions should be taken to assure that
the speaker does not fall off a stage or table when in operation.
The CVE-18s subwoofer includes a receptacle cup to allow mounting of a satellite speaker using a standard speaker pole
shaft. When using a standard speaker pole shaft, be sure to observe the following precautions:
There are many types of pole stands and pole shafts available. Please refer to qualified service personnel from
the pole stand and pole shaft manufacturers for installation service. Improper use of accessories or inappropriate
installation could present a hazard.
Check the speaker pole shaft specification to be certain it is designed to support the weight of the speaker.
Observe all safety precautions specified by the speaker pole shaft manufacturer.
Always verify that the subwoofer is placed on a surface that is flat, level, and stable.
Route cables so that they will not be tripping hazards.
Always be cautious in windy outdoor conditions, as the stability of the entire system may be compromised.
6
CERWIN-VEGA PROFESSIONAL
Quick Start
The steps below provide a quick reference on how to set up and use a single loudspeaker. A typical setup will follow the
same basic steps.
Make sure the loudspeaker is unplugged.
STEP 1
STEP 2
Be sure the power switch is set to the OFF position.
Turn the LEVEL knob to the lowest level (fully counterclockwise).
Place the loudspeaker in the intended location.
Connect the source audio equipment OUTPUT to the loudspeaker INPUT. Be sure the source
equipment is powered on and set to a normal output level.
STEP 3
NOTES
Connect the power cord to the loudspeaker and AC power outlet.
Set the POWER switch to the ON position and verify that the DSP MODE LED indicator is
illuminated.
Slowly turn the LEVEL knob clockwise until the sound output is at the desired level. If there is
no sound, check to make sure that the source equipment is providing audio output.
When you are finished using the loudspeaker, set the POWER switch to the OFF position BEFORE
removing any cables or turning off the source audio equipment.
Loudspeaker Placement
Never point a microphone directly at the loudspeaker, as this will result in feedback (unwanted sound). Be sure
the loudspeaker is placed away from the front of a microphone or directly behind a microphone when it is in a
floor monitor position.
When used with turntables, the loudspeaker should be carefully placed so that any vibrations do not interfere
with the turntable performance and functionality.
Avoid placing the loudspeaker in corners or along the walls of a room. Doing so will increase the low-frequency
sounds, which will result in a muddy and incoherent sound reproduction.
Avoid placing the speaker directly on a hollow stage. It is better to place the loudspeaker on a tripod stand or a
sturdy table.
The loudspeaker should be placed two to four feet above the ear level of the audience since the human body can
absorb sound, especially at high frequencies. This will ensure that the entire audience can hear the sound system
with the best possible clarity.
7
CERWIN-VEGA PROFESSIONAL
Rear Panel – Mixer – CVE-10, CVE-12, CVE-15
DSP MODE SE LECT
This mode selection button allows one of five EQ presets
to be chosen:
LIVE PA – This mode is best used for live music sound. It
has a deeper, more-balanced low-end response.
CLUB/DJ – This mode adds definition and punch to sub
frequencies. It is primarily used for playback of music
styles such as EDM, pop, and hip hop.
MIX/FLAT – This provides a well-balanced overall speaker
response with deeper low-end extension. This mode is a
great starting point for mixing live events.
VOICE – This mode enhances vocal clarity and is best used
when using a common dynamic microphone connected
directly into one of the CH inputs.
MONITOR – Use this mode when using the system as a
stage monitor with a microphone. It balances and softens
frequencies that are prone to feedback in a monitor mix.
BLUETOOTH
The CVE series has True Wireless Stereo (TWS) Bluetooth connectivity. To pair a CVE speaker with a streaming
device, push the PAIR/LINK button once. When the PAIR/LINK button begins flashing blue, the speaker will beep
twice and appear in the available Bluetooth devices list on the streaming device. After the speaker is selected and
successfully paired, it will beep once, and the PAIR/LINK button will be lit blue.
To link two CVE speakers together, push and hold the PAIR/LINK button on the first speaker (that has already
been paired with the streaming device). When its PAIR/LINK button begins flashing orange, the first speaker will
beep twice. Then, push and hold the PAIR/LINK button on the second speaker. The PAIR/LINK buttons on both
speakers will blink orange for approximately five seconds before turning solid orange; this indicates that both
speakers are successfully paired and linked to your streaming device. Once linked, the speakers can be toggled
between mono and stereo by double-tapping the PAIR/LINK button on either speaker while audio is playing.
Note: The Bluetooth level knob adjusts the level of the Bluetooth audio input. Beeps will be heard only if the
Bluetooth level is turned up. CVE speakers cannot be paired, unpaired, or linked while audio is playing.
CH1 INPU T and CH2 INPUT
These are balanced combo inputs for balanced XLR/TRS cables. They accept line-level and mic-level inputs.
LEVEL
The LEVEL knobs for CH1 INPUT and CH2 INPUT adjust the gain levels for their respective input signals. They can
be used for LINE-level or MIC-level inputs. LINE levels are adjusted from MIN (fully counterclockwise) to the center
detent (straight up). MIC levels are adjusted from the center detent (straight up) to MAX (fully clockwise).
MIXED OUT PUT
This output combines CH1 INPUT, CH2 INPUT, and Bluetooth signals for connecting to another powered speaker
or a recording device. This output is affected by changes to each channel’s LEVEL knob.
8
Loading...