Universal Enterprise DT150 Installation Manual

1-800-547-5740 • Fax: [phone]

www.ueitest.com • email: [e-mail]

DT150/DTO150

INSTRUCTION MANUAL

C o n t r ols and Indicators

1. T h e r m o c ouple Po r t : Polarized blades from miniature

thermocouple probe plugs in here.

2. LCD Display: Displays temperature and relative clock information.

3. Power Switch: Powers instrument on and off.

4. Hold/Relative Switch: Quick press freezes temperature data.

Long press switches instrument to the relative-zero display mode.

5. Back Light: Powers back light on and off.

6. K/J/T Thermocouple Select Switch: Changes input reference

for thermocouple ty p e .

7. ˚F/˚C Mode Select Switch: Toggles display mode from degrees

Celsius to degrees Fa h r e n h e i t .

8. Record Mode Select Switch: Starts record mode (relative clock).

Cycles display to indicate either the current temperature, the
m a ximum temperature, or the minimum temperature along with
the hour and minute it was recorded.

Introduction

The DT 150 or DTO 150 is ideal for technicians working in HVAC/R
maintenance, appliance repair, labora t o ry environmental monitoring,
process control, agriculture, and numerous other purposes.

Features include

• Measures from -328 to 2498˚F (-200 to 1370˚C)

• Record mode with relative clock

• Relative zero displays change in temperature

• Hold function

• Switchable ˚F or ˚C

• Back light

Safety Notes

Before using this meter, read all safety information carefully. In
this manual the word "WARNING" is used to indicate conditions
or actions that may pose physical hazards to the user. The word
"CAUTION" is used to indicate conditions or actions that may
damage this instrument.

WARNING!

Exceeding the specified limits of this meter is dangerous and can
expose the user to serious or possibly fatal injury.

• Read the safety precautions associated with the equipment being
tested and seek assistance or advice when performing
unfamiliar tasks.

• Place ONLY thermocouples (type K, J, or T) in the DT150

or DTO150 thermocouple ports.

• Make sure your DT150 or DTO150 is set for the proper

thermocouple type you are using.

• Be sure the thermocouple you are using can withstand the

temperature extreme it may be exposed to in your service task.

• Maintain your DT150 or DTO150 according to the schedule

provided and calibrate it regularly.

International Symbols

DTO150-MAN P. 1

1

2

3

4

5

6

7

8