ORIGINS
¼” CUSTOM PANEL SIZES
BI 95 |
13 15/32” H x 12 15/16” H |
|
|
BI 98 |
15 15/16” x 13 15/16” W |
|
|
75 Series |
28 5/32” H x 22 15/16” W |
|
|
|
|
75 Stainless Series |
29 13/32” H x 22 15/16” W |
|
|
|
|
29 Series |
21 13/32” H x 19 13/16” W |
|
|
|
|
15 Series |
28 5/32” H x 13 15/16” W |
|
|
|
|
15 Stainless Series |
29 13/32” H x 13 15/16” W |
|
|
|
|
Zero clearance on black and white models with a flush/flat door panel.
Door will accept a raised panel. Allow proper clearance, on hinge side when installing a raised panel. Amount of clearance will depend on raised panel thickness.
The maximum panel thickness when inserted into the door reveal (channel) is ¼” thick.
For raised panels, on black and white models, the depth of the reveal is ¼” on both sides and bottom and ½” on top.
For raised panels, on stainless steel models, the depth of the reveal is ¼” on both sides, top and bottom.
Allow 9/16” clearance on hinge side for all stainless steel models with flush/flat panel. Additional clearance maybe needed, on hinge side when installing a raised panel. Amount of clearance will depend on raised panel thickness.
Panel not to exceed 20 pounds.
Conversion information: 1 inch = 2.54 cm
Loading...