Ubiquiti US-24, US-48 Quick Start Guide

/

/

Managed Gigabit Switch
with SFP

Models: US-24, US-48

Introduction

Managed Gigabit Switch
with SFP

Models: US-24, US-48

/

/

Thank you for purchasing the Ubiquiti Networks® UniFi®
Switch. This Quick Start Guide is designed to guide you
through the installation and also includes the warranty terms.

Package Contents

Cage Nuts

(Qty. 4)

or

(Qty. 2)

Rubber Feet

(Qty. 4)

US-24 US-48

Power Cord Rack-Mount Brackets

Mounting Screws

(Qty. 4)

System Requirements

• Linux, MacOSX, or Microsoft Windows 7/8/10

• Java Runtime Environment 1.6 (1.8 or newer recommended)

• Web Browser: Google Chrome (Other browsers may have

limited functionality.)

• UniFi Controller software v4.8.5 or newer (available at:

downloads.ubnt.com/unifi)

TERMS OF USE: All Ethernet cabling runs must use CAT5 (or above). It is the customer’s

responsibility to follow local country regulations, including operation within legal frequency
channels, output power, indoor cabling requirements, and Dynamic Frequency Selection
(DFS) requirements.

Bracket Screws

(Qty. 8)

Quick Start

Guide

Network Topology Requirements

UAP-AC-Outdoor

(UniFi Controller)

• A DHCP-enabled network for the UniFi Switch to obtain an
IPaddress (connected devices will also obtain IP addresses

after deployment)

• A UniFi Cloud Key or management station running the UniFi
Controller v4.8.5 (or newer) software, located either on-site

and connected to the same Layer2 network, or off-site in the
cloud or NOC

UniFi Cloud Key

LAN

WAN

Internet

UAP-AC-LR

Remote Access to

UniFi Controller

UAP-AC-PRO

US-24

USG-PRO-4
(DHCP Server)

Sample Network Diagram

All UniFi devices support off-site management controllers.
For setup details, refer to the User Guide on the website:

documentation.ubnt.com/unifi

Hardware Overview

Ethernet Ports

RJ45 1-48

SFP 1-2

Model US-48

Port Description

RJ45

1-24 (US-24)
1-48 (US-48)

SFP+ 1-2

(US-48 only)

SFP 1-2

Reset
Button

RJ45 ports support 10/100/1000 Ethernet

connections.

Hot-swappable SFP+ ports support 10 Gbps

connections.

Hot-swappable SFP ports support 1 Gbps

connections.

This button serves two functions for the

UniFi Switch:

• Press and release the Reset button to
restart the device.

• Press and hold the Reset button (for at least
five seconds) to restore the device to its
factory default settings.

SFP+ 1-2

Reset

Button

LEDs

System LED

RJ45

Link/Speed/Activity

SFP

Link/Speed/Activity

Model US-48

SFP+

Link/Speed/Activity

System LED

State Status

Flashing White Initializing.

Steady White Factory defaults, waiting for integration.

Alternating
White/Blue

Steady Blue

Device is busy; do not touch or unplug it.
This usually indicates that a process such
as a firmware upgrade is taking place.

Successfully integrated into a network
and working properly.

This is used to locate a device.
When you click Locate in the UniFi

Flashing Blue

Controller software, the System LED
will flash blue. The software will also
display the location of the UniFi Switch

on themap.

RJ45 LEDs

LED State Status

Off No Link

Link Established at

Link/
Speed/
Activity

Amber

Green

10/100Mbps
Flashing Indicates Activity

Link Established at

1000Mbps (1 Gbps)
Flashing Indicates Activity

SFP+ LEDs (Model US-48)

LED State Status

Off No Link

Link/
Speed/
Activity

Green

White

Link Established at 1Gbps
Flashing Indicates Activity

Link Established at 10 Gbps
Flashing Indicates Activity

SFP LEDs

LED State Status

Link/
Speed/
Activity

Off No Link

Green

*640-00237-04*

Link Established at 1Gbps
Flashing Indicates Activity

640-00237-04

Back Panel Ports

Console

Model US-24

Console

Model US-48

Port Description

Console RJ45 serial console port for Command Line

Interface (CLI) management. Use an RJ45-to-DB9,
serial console cable, also known as a rollover
cable, to connect the Console port to your
computer. Then configure the following settings

as needed:

• Baud rate 115200

• Data bits 8

• Parity NONE

• Stop bits 1

• Flow control NONE

DC Input The 25VDC input can connect a redundant or

stand-alone DC power source (not included) with

minimum power: 25W (US-24) or 56W (US-48), 25
to 16V, and 2.5 mm DC power inline connector.

Note: You can use the redundant DC

power source as a hot spare; if the internal

AC/DC power supply no longer provides

power, then the EdgeSwitch Lite will
switch to the DC power source without

Power Connect the included Power Cord to the

interrupting its operation.

Powerport.

DC Input

PowerDC Input

Power

Hardware Installation

The UniFi Switch should be placed on a horizontal surface.

WARNING: FAILURE TO PROVIDE PROPER VENTILATION

MAY CAUSE FIRE HAZARD. KEEP AT LEAST 20 MM OF
CLEARANCE NEXT TO THE VENTILATION HOLES FOR
ADEQUATE AIRFLOW.

WARNING: To reduce the risk of fire or electric shock, do

not expose the UniFi Switch to rain or moisture.

Mounting in a Rack (Optional)

1. Attach the Rack-Mount Brackets to the UniFi Switch using

the eight Bracket Screws.

2. Attach the UniFi Switch to the rack using the four Mounting

Screws. (If the rack has square slots, then use the Cage Nuts
with the Mounting Screws.)

Connecting Power

1. Connect the Power Cord to the power port on the back of

the UniFi Switch.

2. Plug the Power Cord into a power outlet.

Connecting Ethernet

1. Connect an Ethernet cable from your DHCP server or LAN

to any port on the UniFi Switch.

2. Connect your computer or host system and other devices
to the other ports on the UniFi Switch.

Using SFP Ports

1000Mbps SM/SC 20KM DDM

Tx1550nm/Rx1310nm

To use an SFP port:

1. Remove the dust plug covering the SFP port.

2. Insert a compatible fiber SFP module into the SFP port.

3. Connect the fiber optic cable to the fiber SFP module.

For information about compatible fiber SFP modules, visit:

community.ubnt.com/unifi

Software Installation

Download and install the latest version of the UniFi Controller
software at downloads.ubnt.com/unifi and follow the
on-screen instructions.

Note: If you already have UniFi Controller v4.8.5 or newer

installed, skip to the section, Adopting the UniFi Switch.

After you have installed the software and run the UniFi
Installation Wizard, a login screen will appear for the UniFi

Controller management interface. Enter the admin name and
password that you created and click Log In.

You can manage your network and view network statistics
using the UniFi Controller management interface.

To adopt the UniFi Switch, proceed to the Adopting the UniFi
Switch section.

For information on configuring and using the UniFi
Controller software, refer to the User Guide on the website:

documentation.ubnt.com/unifi

Adopting the UniFi Switch

1. From the UniFi Controller dashboard, click Devices in the

left menu bar.

2. On the Devices screen, locate the UniFi Switch in the list
of devices under the Model column. To adopt the UniFi
Switch, click Adopt.

3. The System LED on the UniFi Switch will turn blue to
confirm that it has been successfully adopted.

For more information, refer to the User Guide on the website:

documentation.ubnt.com/unifi

Specifications

Dimensions 443 x 43 x 286 mm (17.44 x 1.69 x 11.26")

Weight

Rack-Mount Brackets
Included

Rack-Mount Brackets
Excluded

Enclosure Characteristics SGCC Steel

Max. AC Power

Consumption

Total Non-Blocking
Line Rate

Power Method

AC

DC

Power Supply AC/DC Internal 56W DC

ESD/EMP Protection Air ± 24 kV, Contact ± 24 kV

Operating Temperature -5 to 40° C (23 to 104° F)

Operating Humidity 5 to 95% Non-Condensing

Shock and Vibration ETSI300-019-1.4 Standard

Interfaces

Networking

Management

LEDs Per Port

RJ45 Data Ports

SFP Data Ports

Rack Mount Yes, 1U

Certications CE, FCC, IC

UniFi Switch US-48

3.65 kg (8.06 lb)

3.56 kg (7.85 lb)

100-240 VAC / 50-60 Hz Universal Input

DC 56W, 25 to 16V, with 2.5 mm

DC Power Inline Connector

(48) 10/100/1000 Mbps RJ45 Ethernet Ports

(2) 1/10 Gbps SFP+ Ethernet Ports

(2) 1 Gbps SFP Ethernet Ports

(1) RJ45 Serial Out-of-Band,

Ethernet In-Band

Speed/Link/Activity
Speed/Link/Activity

70 Gbps

56W

Specifications

Dimensions 443 x 43 x 221 mm (17.44 x 1.69 x 8.70")

Weight

Rack-Mount Brackets
Included

Rack-Mount Brackets
Excluded

Enclosure Characteristics SGCC Steel

Max. Power Consumption 25W

Total Non-Blocking
Line Rate

Power Method

AC

DC

Power Supply AC/DC Internal 20W DC

ESD/EMP Protection Air ± 24 kV, Contact ± 24 kV

Operating Temperature -5 to 40° C (23 to 104° F)

Operating Humidity 5 to 95% Non-Condensing

Shock and Vibration ETSI300-019-1.4 Standard

Interfaces

Networking

Management

LEDs Per Port

RJ45 Data Ports

SFP Data Ports

Rack Mount Yes, 1U

Certications CE, FCC, IC

UniFi Switch US-24

2.60 kg (5.70 lb)

2.51 kg (5.53 lb)

100-240 VAC / 50-60 Hz Universal Input

DC 25W, 25 to 16V, with 2.5 mm

DC Power Inline Connector

(24) 10/100/1000 Mbps RJ45 Ethernet Ports

(2) 1 Gbps SFP Ethernet Ports

(1) RJ45 Serial Out-of-Band,

Ethernet In-Band

Speed/Link/Activity
Speed/Link/Activity

26 Gbps

Safety Notices

1. Read, follow, and keep these instructions.

2. Heed all warnings.

3. Only use attachments/accessories specified by the manufacturer.

WARNING: Failure to provide proper ventilation may

cause fire hazard. Keep at least 20 mm of clearance next

to the ventilation holes for adequate airflow.

WARNING: To reduce the risk of fire or electric shock, do

not expose this product to rain or moisture.

WARNING: Do not use this product in location that can

be submerged by water.

WARNING: Avoid using this product during an electrical

storm. There may be a remote risk of electric shock from
lightning.

Electrical Safety Information

1. Compliance is required with respect to voltage, frequency, and current
requirements indicated on the manufacturer’s label. Connection to a

different power source than those specified may result in improper
operation, damage to the equipment or pose a fire hazard if the
limitations are not followed.

2. There are no operator serviceable parts inside this equipment. Service
should be provided only by a qualified service technician.

3. This equipment is provided with a detachable power cord which has
an integral safety ground wire intended for connection to a grounded
safety outlet.

a. Do not substitute the power cord with one that is not the provided

approved type. Never use an adapter plug to connect to a 2-wire
outlet as this will defeat the continuity of the grounding wire.

b. The equipment requires the use of the ground wire as a part of the

safety certification, modification or misuse can provide a shock
hazard that can result in serious injury or death.

c. Contact a qualified electrician or the manufacturer if there

are questions about the installation prior to connecting the
equipment.

d. Protective earthing is provided by Listed AC adapter. Building

installation shall provide appropriate short-circuit backup
protection.

e. Protective bonding must be installed in accordance with local

national wiring rules and regulations.

Limited Warranty

UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the
product(s) furnished hereunder (the “Product(s)”) shall be free from defects
in material and workmanship for a period of one (1) year from the date
of shipment by UBIQUITI NETWORKS under normal use and operation.
UBIQUITI NETWORKS’ sole and exclusive obligation and liability under
the foregoing warranty shall be for UBIQUITI NETWORKS, at its discretion,

to repair or replace any Product that fails to conform to the above
warranty during the above warranty period. The expense of removal and
reinstallation of any Product is not included in this warranty. The warranty
period of any repaired or replaced Product shall not extend beyond its
original term.

Warranty Conditions

The above warranty does not apply if the Product:
(I) has been modified and/or altered, or an addition made thereto,

except by Ubiquiti Networks, or Ubiquiti Networks’ authorized

representatives, or as approved by Ubiquiti Networks in writing;

(II) has been painted, rebranded or physically modified in any way;

(III) has been damaged due to errors or defects in cabling;

(IV) has been subjected to misuse, abuse, negligence, abnormal physical,

electromagnetic or electrical stress, including lightning strikes, or
accident;

(V) has been damaged or impaired as a result of using third party

firmware;

(VI) has no original Ubiquiti MAC label, or is missing any other original

Ubiquiti label(s); or

(VII) has not been received by Ubiquiti within 30 days of issuance of

the RMA.

In addition, the above warranty shall apply only if: the product has been

properly installed and used at all times in accordance, and in all material
respects, with the applicable Product documentation; all Ethernet cabling

runs use CAT5 (or above), and for outdoor installations, shielded Ethernet

cabling is used, and for indoor installations, indoor cabling requirements
are followed.

Returns

No Products will be accepted for replacement or repair without obtaining

a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS

during the warranty period, and the Products being received at UBIQUITI

NETWORKS’ facility freight prepaid in accordance with the RMA process of
UBIQUITI NETWORKS. Products returned without an RMA number will not

be processed and will be returned freight collect or subject to disposal.

Information on the RMA process and obtaining an RMA number can be
found at: www.ubnt.com/support/warranty.

Disclaimer

EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI
NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA,
SERVICE, SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM
AND MAKE NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND,
EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO,
REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF MERCHANTABILITY,
ACCURACY, QUALITY OF SERVICE OR RESULTS, AVAILABILITY,
SATISFACTORY QUALITY, LACK OF VIRUSES, QUIET ENJOYMENT, FITNESS
FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT AND ANY
WARRANTIES ARISING FROM ANY COURSE OF DEALING, USAGE OR
TRADE PRACTICE IN CONNECTION WITH SUCH PRODUCTS AND SERVICES.
BUYER ACKNOWLEDGES THAT NEITHER UBIQUITI NETWORKS NOR
ITS THIRD PARTY PROVIDERS CONTROL BUYER’S EQUIPMENT OR THE
TRANSFER OF DATA OVER COMMUNICATIONS FACILITIES, INCLUDING
THE INTERNET, AND THAT THE PRODUCTS AND SERVICES MAY BE
SUBJECT TO LIMITATIONS, INTERRUPTIONS, DELAYS, CANCELLATIONS
AND OTHER PROBLEMS INHERENT IN THE USE OF COMMUNICATIONS
FACILITIES. UBIQUITI NETWORKS, ITS AFFILIATES AND ITS AND THEIR THIRD
PARTY PROVIDERS ARE NOT RESPONSIBLE FOR ANY INTERRUPTIONS,
DELAYS, CANCELLATIONS, DELIVERY FAILURES, DATA LOSS, CONTENT
CORRUPTION, PACKET LOSS, OR OTHER DAMAGE RESULTING FROM ANY
OF THE FOREGOING. In addition, UBIQUITI NETWORKS does not warrant

that the operation of the Products will be error-free or that operation will

be uninterrupted. In no event shall UBIQUITI NETWORKS be responsible

for damages or claims of any nature or description relating to system

performance, including coverage, buyer’s selection of products (including
the Products) for buyer’s application and/or failure of products (including

the Products) to meet government or regulatory requirements.

Limitation of Liability

EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL
UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR
DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES
(INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING
OUT OF THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THE
PRODUCT, WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER
LEGAL THEORY, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.

Note

Some countries, states and provinces do not allow exclusions of implied
warranties or conditions, so the above exclusion may not apply to you.
You may have other rights that vary from country to country, state to
state, or province to province. Some countries, states and provinces do not
allow the exclusion or limitation of liability for incidental or consequential

damages, so the above limitation may not apply to you. EXCEPT TO
THE EXTENT ALLOWED BY LOCAL LAW, THESE WARRANTY TERMS DO
NOT EXCLUDE, RESTRICT OR MODIFY, AND ARE IN ADDITION TO, THE
MANDATORY STATUTORY RIGHTS APPLICABLE TO THE LICENSE OF ANY
SOFTWARE (EMBEDDED IN THE PRODUCT) TO YOU. The United Nations

Convention on Contracts for the International Sale of Goods shall not apply
to any transactions regarding the sale of the Products.

Compliance

FCC

Changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including
interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio

communications. Operations of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to
correct the interference at his own expense.

Industry Canada

CAN ICES-3(A)/NMB-3(A)

This Class A digital apparatus complies with Canadian CAN ICES-3(A).

CAN ICES-3(A)/NMB-3(A)

Cet appareil numérique de la classe A est conforme à la norme NMB-3(A)

Canada.

Australia and New Zealand

Warning: This is a Class A product. In a domestic environment this

product may cause radio interference in which case the user may
be required to take adequate measures.

CE Marking

CE marking on this product represents the product is in compliance with all
directives that are applicable to it.

RoHS/WEEE Compliance Statement

English

European Directive 2012/19/EU requires that the equipment bearing
this symbol on the product and/or its packaging must not be disposed

of with unsorted municipal waste. The symbol indicates that this
product should be disposed of separately from regular household waste
streams. It is your responsibility to dispose of this and other electric and
electronic equipment via designated collection facilities appointed by the
government or local authorities. Correct disposal and recycling will help
prevent potential negative consequences to the environment and human
health. For more detailed information about the disposal of your old
equipment, please contact your local authorities, waste disposal service, or
the shop where you purchased the product.

Deutsch

Die Europäische Richtlinie 2012/19/EU verlangt, dass technische
Ausrüstung, die direkt am Gerät und/oder an der Verpackung mit diesem

Symbol versehen ist, nicht zusammen mit unsortiertem Gemeindeabfall
entsorgt werden darf. Das Symbol weist darauf hin, dass das Produkt

von regulärem Haushaltmüll getrennt entsorgt werden sollte. Es

liegt in Ihrer Verantwortung, dieses Gerät und andere elektrische

und elektronische Geräte über die dafür zuständigen und von der

Regierung oder örtlichen Behörden dazu bestimmten Sammelstellen zu

entsorgen. Ordnungsgemäßes Entsorgen und Recyceln trägt dazu bei,
potentielle negative Folgen für Umwelt und die menschliche Gesundheit
zu vermeiden. Wenn Sie weitere Informationen zur Entsorgung Ihrer
Altgeräte benötigen, wenden Sie sich bitte an die örtlichen Behörden oder
städtischen Entsorgungsdienste oder an den Händler, bei dem Sie das

Produkt erworben haben.

Español

La Directiva 2012/19/UE exige que los equipos que lleven este símbolo en
el propio aparato y/o en su embalaje no deben eliminarse junto con otros
residuos urbanos no seleccionados. El símbolo indica que el producto

en cuestión debe separarse de los residuos domésticos convencionales
con vistas a su eliminación. Es responsabilidad suya desechar este y
cualesquiera otros aparatos eléctricos y electrónicos a través de los puntos
de recogida que ponen a su disposición el gobierno y las autoridades

locales. Al desechar y reciclar correctamente estos aparatos estará

contribuyendo a evitar posibles consecuencias negativas para el medio

ambiente y la salud de las personas. Si desea obtener información más

detallada sobre la eliminación segura de su aparato usado, consulte a las
autoridades locales, al servicio de recogida y eliminación de residuos de su
zona o pregunte en la tienda donde adquirió el producto.

Français

La directive européenne 2012/19/UE exige que l’équipement sur lequel
est apposé ce symbole sur le produit et/ou son emballage ne soit pas jeté

avec les autres ordures ménagères. Ce symbole indique que le produit
doit être éliminé dans un circuit distinct de celui pour les déchets des
ménages. Il est de votre responsabilité de jeter ce matériel ainsi que tout
autre matériel électrique ou électronique par les moyens de collecte
indiqués par le gouvernement et les pouvoirs publics des collectivités

territoriales. L’élimination et le recyclage en bonne et due forme ont pour
but de lutter contre l’impact néfaste potentiel de ce type de produits
sur l’environnement et la santé publique. Pour plus d’informations sur le
mode d’élimination de votre ancien équipement, veuillez prendre contact

avec les pouvoirs publics locaux, le service de traitement des déchets, ou

l’endroit où vous avez acheté le produit.

Italiano

La direttiva europea 2012/19/UE richiede che le apparecchiature
contrassegnate con questo simbolo sul prodotto e/o sull’imballaggio non

siano smaltite insieme ai rifiuti urbani non differenziati. Il simbolo indica
che questo prodotto non deve essere smaltito insieme ai normali rifiuti

domestici. È responsabilità del proprietario smaltire sia questi prodotti sia

le altre apparecchiature elettriche ed elettroniche mediante le specifiche
strutture di raccolta indicate dal governo o dagli enti pubblici locali. Il
corretto smaltimento ed il riciclaggio aiuteranno a prevenire conseguenze

potenzialmente negative per l’ambiente e per la salute dell’essere umano.
Per ricevere informazioni più dettagliate circa lo smaltimento delle vecchie

apparecchiature in Vostro possesso, Vi invitiamo a contattare gli enti
pubblici di competenza, il servizio di smaltimento rifiuti o il negozio nel
quale avete acquistato il prodotto.

Declaration of Conformity

Česky
[Czech]

Dansk
[Danish]

Nederlands
[Dutch]

English

Eesti
[Estonian]

Suomi
[Finnish]

Français
[French]

Deutsch
[German]

Ελληνική
[Greek]

Magyar
[Hungarian]

Íslenska
[Icelandic]

Italiano
[Italian]

Latviski
[Latvian]

UBIQUITI NETWORKS tímto prohlašuje, že toto UBIQUITI NETWORKS
zařízení, je ve shod se základními požadavky a dalšími příslušnými
ustanoveními směrnic 2014/30/EU, 2014/35/EU.

Hermed, UBIQUITI NETWORKS, erklærer at denne UBIQUITI
NETWORKS enhed, er i overensstemmelse med de væsentlige krav
og øvrige relevante krav i direktiver 2014/30/EU, 2014/35/EU.

Hierbij verklaart UBIQUITI NETWORKS, dat deze UBIQUITI NET WORKS
apparaat, in overeenstemming is met de essentiële eisen en de
andere relevante bepalingen van richtlijnen 2014/30/EU, 2014/35/EU.

Hereby, UBIQUITI NETWORKS, declares that this UBIQUITI
NETWORKS device, is in compliance with the essential requirements
and other relevant provisions of Directives 2014/30/EU, 2014/35/EU.

Käesolevaga UBIQUITI NETWORKS kinnitab, et antud UBIQUITI
NETWORKS seade, on vastavus olulistele nõuetele ja teistele
asjakohastele sätetele direktiivide 2014/30/EL, 2014/35/EL.

Täten UBIQUITI NETWORKS vakuuttaa, että tämä UBIQUITI
NETWORKS laite, on yhdenmukainen olennaisten vaatimusten ja
muiden sitä koskevien direktiivien 2014/30/EU, 2014/35/EU.

Par la présente UBIQUITI NETWORKS déclare que l’appareil UBIQUITI
NETWORKS, est conforme aux exigences essentielles et aux autres
dispositions pertinentes des directives 2014/30/UE, 2014/35/UE.

Hiermit erklärt UBIQUITI NETWORKS, dass sich dieses UBIQUITI
NETWORKS Gerät, in Übereinstimmung mit den grundlegenden
Anforderungen und den anderen relevanten Vorschriften der
Richtlinien 2014/30/EU, 2014/35/EU befindet.

Δια του παρόντος, UBIQUITI NETWORKS, δηλώνει ότι αυτή η
συσκευή UBIQUITI NETWORKS, είναι σε συμμόρφωση με τις βασικές
απαιτήσεις και τις λοιπές σχετικές διατάξεις των οδηγιών
2014/30/ΕE, 2014/35/ΕE.

Ezennel UBIQUITI NETWORKS kijelenti, hogy ez a UBIQUITI
NETWORKS készülék megfelel az alapvető követelményeknek és más
vonatkozó 2014/30/EU, 2014/35/EU irányelvek rendelkezéseit.

Hér, UBIQUITI NETWORKS, því yfir að þetta UBIQUITI NETWORKS tæki
er í samræmi við grunnkröfur og önnur viðeigandi ákvæði tilskipana
2014/30/ESB, 2014/35/ESB.

Con la presente, UBIQUITI NETWORKS, dichiara che questo
dispositivo UBIQUITI NETWORKS, è conforme ai requisiti essenziali
ed alle altre disposizioni pertinenti delle direttive 2014/30/UE,
2014/35/UE.

Ar šo, UBIQUITI NETWORKS, deklarē, ka UBIQUITI NETWORKS ierīce, ir
saskaņā ar būtiskajām prasībām un citiem attiecīgiem noteikumiem
Direktīvās 2014/30/ES, 2014/35/ES.

Lietuviškai
[Lithuanian]

Malti
[Maltese]

Norsk
[Norwegian]

Polski
[Polish]

Português
[Portuguese]

Română
[Romanian]

Slovensky
[Slovak]

Español
[Spanish]

Svenska
[Swedish]

UBIQUITI NETWORKS deklaruoja, kad šis UBIQUITI NETWORKS
įrenginys atitinka esminius reikalavimus ir kitas 2014/30/ES,
2014/35/ES Direktyvų nuostatas.

Hawnhekk, UBIQUITI NETWORKS, tiddikjara li dan il-mezz UBIQUITI
NETWORKS huwa konformi mar-rekwiżiti essenzjali u dispożizzjonijiet
rilevanti oħrajn ta ‘Direttivi 2014/30/UE, 2014/35/UE.

Herved UBIQUITI NETWORKS, erklærer at denne UBIQUITI NETWORKS
enheten, er i samsvar med de grunnleggende kravene og andre
relevante bestemmelser i direktivene 2014/30/EU, 2014/35/EU.

Niniejszym, Ubiquiti Networks, oświadcza, że urządzenie UBIQUITI
NETWORKS, jest zgodny z zasadniczymi wymaganiami oraz
pozostałymi stosownymi postanowieniami Dyrektyw 2014/30/UE,
2014/35/UE.

UBIQUITI NETWORKS declara que este dispositivo UBIQUITI
NETWORKS, está conforme com os requisitos essenciais e outras
disposições das Directivas 2014/30/UE, 2014/35/UE.

Prin prezenta, UBIQUITI NETWORKS declară că acest dispozitiv
UBIQUITI NETWORKS este în conformitate cu cerințele esențiale și
alte prevederi relevante ale Directivelor 2014/30/UE, 2014/35/UE.

Týmto UBIQUITI NETWORKS, prehlasuje, že toto UBIQUITI
NETWORKS zariadenie, je v súlade so základnými požiadavkami
a ďalšími relevantnými ustanoveniami smernice 2014/30/EÚ,
2014/35/EÚ.

Por medio de la presente UBIQUITI NETWORKS declara que este
dispositivo UBIQUITI NETWORKS, cumple con los requisitos
esenciales y cualesquiera otras disposiciones aplicables o exigibles
de las Directivas 2014/30/UE, 2014/35/UE.

Härmed UBIQUITI NETWORKS, intygar att denna UBIQUITI
NETWORKS enhet är i överensstämmelse med de väsentliga
egenskapskrav och övriga relevanta bestämmelser som framgår av
direktiven 2014/30/EU, 2014/35/EU.

Online Resources

Support help.ubnt.com

Community community.ubnt.com

Downloads downloads.ubnt.com

www.ubnt.com

©2016 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti

Networks, the Ubiquiti U logo, the Ubiquiti beam logo, and UniFi are
trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United

States and in other countries. All other trademarks are the property of their

respective owners. AJAI072116