Ubiquiti UDM User Manual
Simply Powerful Networking
Model: UDM
Introduction
Thank you for purchasing the Ubiquiti Networks® UniFi®
Dream Machine. This Quick Start Guide is designed to guide
you through installation and also includes warrantyterms.
Package Contents
UniFi Dream Machine AC Power Cord
System Requirement
Either of the following is required:
• iOS or Android™ Smartphone with UniFi App Installed
• Web Browser: Google Chrome (Other browsers may have
limited functionality)
IMPORTANT: We strongly recommend using UPS backup
and power regulation to prevent equipment damage due
to stability issues with local AC power.
TERMS OF USE: All Ethernet cabling runs must use CAT5 (or above). It is the professional
installer’s responsibility to follow local country regulations, including operation within legal
frequency channels, output power, indoor cabling requirements, and Dynamic Frequency
Selection (DFS) requirements.
Hardware Overview
Ports
LAN
Internet
Power
Interface Description
Internet
Power Connect the included AC Power Cord.
RJ45 ports support 10/100/1000 Ethernet
connections. By default, they are set to
LAN
DHCP Server with the fallback IP address,
192.168.1.1/24.
The RJ45 port supports a 10/100/1000
Ethernet connection. Set to DHCP Client
by default.
System LED
System
Color State Status
White Solid Device is ready to be configured
Blue Solid Device is configured and ready
Off/White/
Blue
Flashing Device is booting up
Heartbeat Firmware update in process
Slow
Flashing
Flashing Device is in recovery mode.
Device is initializing/deinitializing
Client connected to device via
Bluetooth (BLE)
The LED will cycle through a pattern
at one‑second intervals, between
off, white, and blue.
Reset Button
Reset
Button Description
Reset
Resets to factory defaults. The UniFi Dream
Machine should be running after bootup is
complete. Press and hold the Reset button
for about 10 seconds until the LED starts
flashing and then becomes solidly lit. After
a few seconds, the LED will turn off, and the
UniFi Dream Machine will automatically
reboot.
Installation Requirements
Use Category 5 (or above) UTP cabling approved for indoor
use.
WARNING: To reduce the risk of fire or electric shock, do
not expose this product to rain or moisture.
Hardware Installation
1. Connect the AC Power Cord to the Power port of the UniFi
Dream Machine and a power outlet.
Loading...