|
|
Project Name: |
AIA # |
|
|
|
|
TRUE FOOD SERVICE EQUIPMENT, INC. |
|
Location: |
SIS # |
|
Item #: |
||
St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri |
63366 |
Qty: |
|
|
|
||
(636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com |
Model #: |
|
GDM Series -
Convenience Store Coolers
(End of Aisle models)
GDM-
TRUE is the world’s largest manufacturer of glass door merchandisers.
Also available:
•Lower Height & Standard Depth Models
•Standard Height & Narrow Depth Models
•Lower Height & Narrow Depth Models
•Lower Height & Narrow Depth Pass-Thru Models
Remote cabinets available 14% off list (condensing units supplied by others).
Consult factory technical service dept. for BTU information.
Glass Door Convenience Store Coolers
(end of aisle models)
GDM-10, GDM-10PT,
TCM-84 & TCM-78AC
SPECIFICATIONS / FEATURES
CABINET CONSTRUCTION:
•Durable and permanent non-peel or chip vinyl exterior.
•White, vinyl coated aluminum interior cabinet liner with 300 series stainless steel floor. Construction of liner in accordance with NSF standards.
•Cabinet mounted on a welded, galvanized frame rail, painted for additional corrosion protection.
•Safety shielded fluorescent interior lighting.
DOORS:
•Triple pane thermal insulated glass. Doors extend full width of cabinet shell. Door gaskets of one piece construction (air-curtain, TCM-78AC, standard without doors).
•Torsion type closure system with self closing doors. The face of each door fitted with a 12" long handle. Manual slide doors on TCM-84. (air-curtain, TCM-78AC, standard without doors)
INSULATION:
•Entire cabinet structure insulated using foamed-in-place CFC free polyurethane foam.
SHELVING:
•Adjustable vinyl coated wire shelves. Shelves capable of supporting up to 250 lbs (bin dividers standard on TCM-84 & TCM-78AC).
•Full height shelf support pilasters, with double oblong holes on 1/2" centers. Pilasters made of the same material as cabinet interior. Four (4) chrome plated, stainless steel shelf clips to be included for each shelf (excludes TCM-84 & TCM-78AC).
REFRIGERATION SYSTEM:
•Refrigeration system factory balanced using CFC free 134A refrigerant.
•Condensing unit easily accessed for maintenance.
•Factory pre-engineered capillary tube system with oversized condenser
and evaporator to reduce product pull down time and to consistently maintain 33°F to 38°F interior cabinet temperature. (non-adjustable capillary tube system superior to problematic expansion valve)
•Evaporator - epoxy coated at the time of manufacture to eliminate the potential of corrosion.
ELECTRICAL CHARACTERISTICS:
•Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase - 15 amp dedicated outlet. A cord and plug set to be included.
•A sole use circuit is required.
115/60/1 NEMA-5-15R
Printed in
U.S.A. 5
YEAR |
R |
R |
COMPRESSOR |
|
® |
2/03 Exceptions:
|
|
E R |
N |
G |
|
Y |
||
E |
|
S |
|
|
|
S |
|
|
A |
|
S |
|
V I NG |
Specifications subject to change without notice.
APPROVALS: