Trendnet TV-IP751WIC, TV-IP751WC User's Guide

TRENDnet User’s Guide

Cover Page

TRENDnet User’s Guide

Table of Contents

Contents

Product Overview ........................................................................... 1

Package Contents .......................................................................................................... 1

Features ......................................................................................................................... 1

Product Hardware Features........................................................................................... 2

Application Diagram ...................................................................................................... 3

Installation Option Description* ...................................................... 4

Wired Connection ..................................................................................................... 4

WPS Connection ........................................................................................................ 4

TRENDnet Cloud Service .................................................................. 5

Image A (connecting using WPS) ................................................................................... 5

Image B (wired connection) ........................................................................................... 5

Blue Mode ..................................................................................................................... 5

Green Mode ................................................................................................................... 6

Red Mode ...................................................................................................................... 6

Install the Camera ........................................................................... 7

Configure Manual Wireless settings (without WPS) .................................................... 11

Wireless ................................................................................................................... 20

Network .................................................................................................................. 20

Cloud Link ................................................................................................................ 20

Active Users ............................................................................................................ 21

Configuring Camera Settings ....................................................................................... 21

System ..................................................................................................................... 21

Video ....................................................................................................................... 22

Audio ....................................................................................................................... 22

Wireless ................................................................................................................... 22

Network .................................................................................................................. 23

Cloud Link Settings .................................................................................................. 24

User ......................................................................................................................... 25

Date/Time ............................................................................................................... 25

Motion Detection .................................................................................................... 26

Upload ..................................................................................................................... 26

E-mail ...................................................................................................................... 27

Day/Night Mode...................................................................................................... 28

Tools ............................................................................................................................ 29

FTP Server Test ........................................................................................................ 29

Connect to your TV-IP751WC/TV-IP751WIC with a Mobile App ...... 15

Mobile Apps, QR code Download Option .................................................................... 15

Configuration ................................................................................ 18

Viewing Video .............................................................................................................. 18

Viewing Camera Settings ............................................................................................. 19

System ..................................................................................................................... 19

Video ....................................................................................................................... 19

Audio ....................................................................................................................... 20

E-mail Test ............................................................................................................... 29

Restart ..................................................................................................................... 30

Factory Reset .......................................................................................................... 30

Firmware Upgrade .................................................................................................. 30

Backup and Restore ................................................................................................ 31

How to setup/access the camera remotely .................................... 32

Technical Specifications ................................................................ 35

Troubleshooting ........................................................................... 39

TRENDnet User’s Guide

TV-IP751WC / TV-IP751WIC

Product Overview

TV-IP751WC TV-IP751WIC

Package Contents

In addition to your camera, the package includes:

 Muti-Language Quick Installation Guide  CD-ROM (Utility, software & User’s Guide)  Network cable (1.5m / 5ft)  Power adapter (5V DC, 1.2A)  Camera mounting kit

If any package contents are missing or damaged, please contact the retail store, online retailer, or reseller/distributor that the item was purchased.

Features

TV-IP751WC

The Wireless Cloud Camera, model TV-IP751WC, transmits real-time video over the Internet. Wireless n technology provides unsurpassed wireless coverage and improved streaming video quality. Add this camera to your wireless network at the touch of a button with Wi-Fi Protected Setup (WPS).

Record 640 x 480 (VGA) video at up to 20 frames per second (fps). Manage up to 32 TRENDnet cameras with the included complimentary camera management software. Advanced features include adjustable motion detection recording areas, email alerts, scheduled recording sessions, one-way audio, an adjustable lens, and four times digital zoom. A wall/ceiling mounting kit is included and the camera’s off white housing blends into most environments.

TV-IP751WIC

The Wireless Day/Night Cloud Camera, model TV- IP751WIC, transmits real-time video over the Internet. Record crisp video in complete darkness for distances of up to 7.5 meters. Wireless n technology provides unsurpassed wireless coverage and improved streaming video quality. Add this camera to your wireless network at the touch of a button with Wi-Fi Protected Setup (WPS).

zoom. A wall/ceiling mounting kit is included and the camera’s off white housing blends

into most environment.

TRENDnet User’s Guide

TV-IP751WC / TV-IP751WIC

IR LED

Power port

Ethernet port

Light Sensor

Microphone

Camera Lens

Power/Link LED

Focus ring

Product Hardware Features

Rear Panel View

Front Panel View

 LAN Port – Connect Ethernet cables to your wired network devices.

 Power Port – Connect the included power adapter from your camera to an

available power outlet.

Note: Use only the adapter that came with your camera.

 IR LED – Built-in 4 IR LED for night vision uses. (for TV-IP751WIC)

 Light Sensor – Detects the light source to turn IR on or off.

 Focus ring – turn to adjust the focus of the camera.

 Microphone – Built-in microphone for audio can be turn on or off.

 Power - This LED indicator is solid blue when your camera is powered on.

Otherwise if this LED indicator is off, there is no power to your camera.

 Link – This LED indicator is blinking orange when there is connection/data to

your camera.

TRENDnet User’s Guide

TV-IP751WC / TV-IP751WIC

Reset

WPS

Side Panel View

Application Diagram

 Reset Button – Use an item such as a paperclip to push and hold this button for

3 seconds and release to reset your camera to its factory defaults.

 WPS (Wi-Fi Protected Setup) – Push and hold this button for 3 seconds to

activate WPS. The button LED is blinking green when WPS is activated.

TRENDnet User’s Guide

TV-IP751WC/ TV-IP751WIC

Installation Option Description*

Wired Connection

1. Connect the Ethernet Cable

If you intend to use the network camera as a wired device, connect one end of the included Ethernet cable into the Ethernet port on the rear panel of the camera and connect the other end to an available port on your network. If you prefer to use the camera on a wireless network, see below for instructions on connecting the power adapter.

2. Attach the Power Supply

Attach the included power supply to the DC 5V 1.2A receptor on the rear panel of the camera and then connect it to a wall outlet or power strip. A blue LED will light up under the lens indicating that the camera has power.

WPS Connection

An alternative method of connecting your camera to your network is by using WPS. WPS is a quick, simple and secure method of adding devices to a network. If you have a router which supports WPS follow the steps below, otherwise, please use the wired mode of setting up the camera.

1. Attach the Power Supply

2. Press the WPS button on your wireless device then press the WPS button on

the camera.

*The Install wizard CD inside the package box will guide you step-by-step of wired or

wireless options with the TRENDnet Cloud Service of installation; please refer to the page 7.

TRENDnet User’s Guide

TV-IP751WC/ TV-IP751WIC

TRENDnet Cloud Service

Note: (Before beginning, make sure you are connected to the internet and the camera is accessible to the web).

1. Take a look for a similar URL to this (11223344.cam.trendnetcloud.com) at the

label on the back of the camera.

2. Connect the power cable to the camera.

There are two methods to connect to the internet, wired and wireless. For wireless, follow the instructions from Image A below. For wired, follow the instructions from

Image B below.

Image A (connecting using WPS)

Image B (wired connection)

3. Open your browser, type the URL listed at the back of your camera and hit

Enter to connect to the camera’s live stream. Please note: you can also use this URL to connect to the camera from any location or computer.

There are three modes when connecting your TV-IP751WC/TV-IP751WIC to the web. This is visible through the “cloud” at the top right side of the web interface.

Blue Mode

The Blue Mode indicates the camera is connecting directly to the internet or local network. This mode offers configuration and management options.

TRENDnet User’s Guide

TV-IP751WC/ TV-IP751WIC

Green Mode

The Green Mode indicates the camera is connecting to media in a peer-to-peer fashion to the internet or local network. This mode doesn’t offer configuration and management options – only live streaming.

Red Mode

The Red Mode indicates the camera is connecting to the internet or local network through a firewall. This mode doesn’t offer configuration and management options – just live streaming for 180 seconds.

The firewall settings limits live streaming for each user.

The “red” notification at the bottom of the viewing area warns users of the limited time

Refresh this screen continuously if you wish to view your camera’s live stream.

TRENDnet User’s Guide

TV-IP751WC/ TV-IP751WIC

Install the Camera

Insert the included CD-ROM into your CD/DVD drive. The Install Wizard program will run automatically.

Note: If the Install Wizard does not run, you may have autorun disabled on your machine. In this case, browse to the CD drive and run InstallWizard.exe to begin the installation wizard.

Begin by selecting a language from the drop-down menu. Currently, the TV-IP751 supports the following languages: English, French, German, Russian and Spanish. Then click Install Camera and follow the on-screen steps to continue the installation.

1. This is TRENDnet’s Terms of Use. Click Agree to continue.

2. The next step references information on the camera itself. Go to your camera

and check the details at the back of the device. Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu.

3. The most important part of the setup process is the network connection type.

There are three options:

a. Connect camera to your wireless network using Wi-Fi Protected Setup

(WPS) button (Verify your router has a WPS button. If not, select the next option).

b. Connect camera to your wireless network manually c. Connect camera to your network using a network cable.

TRENDnet User’s Guide

TV-IP751WC/ TV-IP751WIC

4. The basic connection type is “C” using a network cable. Let’s begin the

installation process using the network cable connection first. Click this radio button and click Next to continue, Back to go to the previous screen or Home to return to the Main Menu.

5. Follow the instructions in the next screen to Power up the Camera. Click Next

to continue, Back to go to the previous screen or Home to return to the Main Menu.

6. Connect one end of the network cable to your camera and the other end to

your router. Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu.

TRENDnet User’s Guide

TV-IP751WC/ TV-IP751WIC

7. The wizard searches the network for your camera.

8. If you only have one camera on your network, the wizard will automatically

select it (as shown below). Otherwise, if you have more than one camera, it provides several options from the list. The wizard provides the Model Number and MAC Address of the camera. If you do not see any of your camera(s) in the wizard, click Retry to scan for the camera again. Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu.

9. Password Settings. Follow the instructions on the screen. The Default

username is admin. Click the Change Password checkbox to enter the new password details. Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu.

TRENDnet User’s Guide

TV-IP751WC/ TV-IP751WIC

10. The wizard configures your parameters.

12. The mobile option allows the user to download the TRENDnet CloudView App

in either Apple or Google android format. To use this feature, the user must have a QR Scanner App on their mobile device. This is also available from the Apple App Store or Google’s Play store. Click Next to continue, or Home to go to the main menu.

11. The initial setup is complete. The main feature is the Cloud Access accessibility

feature. Click the link(s) or icon below to create a shortcut on your desktop. Also, below the icon is a warning. This warning is only shown when the internet connection is inactive or the Cloud server cannot be found. Make sure the internet connection is active, click Retry. When the Cloud server isn’t found, the server may be busy or under maintenance. Under these circumstances, click Retry later again. If there is no warning, click Next.

You are now ready to use your camera. Click Finish to exit.

Connecting to your TV-IP751WC/TV-IP751WIC with a Mobile App

Please refer to the page 15 for mobile apps download through the QR code option.

TRENDnet User’s Guide

TV-IP751WC/ TV-IP751WIC

Configure Manual Wireless settings (without WPS)

2. Connect the network cable. Click Next to continue.

Under Network connection and initial setup method, read the instructional warning on router wireless settings. Provided you are familiar with these optional settings, select the method that best suits your needs otherwise select the easier method, Connect camera to your wireless network manually. This preferred setup requires no security and is much easier to configure. Use, Connect camera to your wireless network using Wi-Fi Protected Setup (WPS) only if you know where your WPS button is and have a good knowledge of how it works.

Click Next to continue, Back to go to the previous screen or Home to return to the Main

Menu.

Please read the next steps carefully as it pertains to the wireless manual settings feature on your router and camera.

1. Power Up the Camera. Follow the instructions and click Next to continue. If you

wish to go to the previous screen, click Back or Home to return to the main menu.

3. Please wait while the wizard searches for your camera.

TRENDnet User’s Guide

TV-IP751WC/ TV-IP751WIC

4. Once your camera has been detected, the wizard displays the Model number

and MAC address. If you have more than one camera then select the one you want to activate. Click Next to continue.

5. Change the password settings here or leave it at default. Click Next to continue.

6. Wait while the camera is configured with the new settings.

7. Once the wizard has found your Access Point, you will be prompted to enter an

8-16 bit password depending on your router configuration. Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu.

+ 31 hidden pages