TP-Link TL-WN881ND Installation Guide
1 Connect to a Computer
a. Unplug the power cable and remove
the case panel.
b. Locate an available PCI-E slot and carefully
insert the adapter.
Note:
If the bracket is not suitable for your computer, detach it from
the adapter's board and replace it with the low-prole bracket
provided.
c. Connect the antennas to the adapter.
d. Replace the case panel, plug in the power
cable and turn on your computer.
2 Install Driver
Connections are available
Wireless Network Connection
a.
Insert the CD and run the Autorun.exe.
Note:
You can also download the driver from the product’s
Support page at www.tp-link.com.
b.
Select TL-WN881ND and follow the
instructions to complete the installation.
Note:
If you can’t install the driver successfully, disable
the antivirus software and firewall, then try again.
3 Join a Wireless Network
a. Click the network icon ( or ) on the
taskbar.
b. Select your Wi-Fi network, click Connect,
and enter the password when prompted.
TP-Link_XXXX
√
Connect automatically
Connect
Quick Installation Guide
300Mbps Wireless N
PCI Express Adapter
TL-WN881ND
For detailed instructions, please refer to the User Manual from
this product’s Support page at www.tp-link.com.
For technical support and other information, please
visit http://www.tp-link.com/support, or simply
scan the QR code.
7106507700 REV2.1.1
©2017 TP-Link
MODEL NO. TL-WN881ND
Loading...