TP-Link TL-SL1311MP Product Overview

8-Port 10/100Mbps + 3-Port Gigabit

Desktop Switch with 8-Port PoE+

MODEL: TL-SL1311MP Datasheet

Highlights

- With eight PoE+ ports, transfers data and power on one single cable

- Working with IEEE 802.3af/at compliant PDs, expands your network

- Supports PoE power up to 30 W for each PoE port

- Supports PoE power up to 124 W* for all PoE ports

- Up to 250 m data and power transmission under Extend Mode** specially designed for surveillance system

- Isolation Mode allows one-click client trac separation for higher security and performance

- With PoE Auto Recovery, the switch will automatically reboot your dropped or unresponsive PoE-powered

devices connected to port 1–8

- Requires no conguration and installation

- Fanless Design

Overview

TL-SL1311MP is an unmanaged switch with 8 10/100 Mbps ports, 2 1000 Mbps ports, and 1 SFP slot

that requires no conguration, and provides 8 PoE (Power over Ethernet) ports. It can automatically

detect and supply power with all IEEE 802.3af/at compliant Powered Devices (PDs). In this situation, the

electrical power is transmitted along with data in one single cable allowing you to expand your network

to where there are no power lines or outlets, where you wish to x devices such as APs, IP Cameras or

IP Phones, etc.

Power Over Ethernet

8 10/100 Mpbs Auto-Negotiation RJ45 ports (port 1 to port 8) of the switch support Power over

Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE

802.3af/at compliant Powered Devices (PDs).

Overload Arrangement

TL-SL1311MP has the priority function which will help protect the system when the system power is

overloaded. If all PoE PDs power consumption is ≥ 124 W*, a priority will be arranged among the PoE

ports, then the system will cut o the power of the lowest-priority port.

Intelligent Power Management

Priority (port 1 > port 2 > port 3>

power is overloaded. For example, port 1, 2, 3 and 5 is using 25 W respectively (maximum power per

port is 30 W); the system power is 100 W in total. If there is an additional PD inserted to port 4 with 30 W,

and then the system will cut o the power of port 5 because of the overloaded power, this means port

1, 2, 3 will use 25 W respectively and port 4 will use 30 W, no power will be supplied to port 5.

> port 8): This function will help protect the system when the system

...

Highlight Performance

• Up to 250 m PoE power supply and data transmission under Extend Mode**.

• Isolation Mode easily divides trac for port 1–8 to avoid snooping and tampering, which improves

LAN security and performance.

• With PoE Auto Recovery, the switch will constantly detect the data transmission with PoE-powered

devices (PD). When the switch nds that a PD stops sending data packets to the switch for a long

period, the switch will reboot it automatically.

Easy to Use

TL-SL1311MP is easy to install and use. It requires no conguration and installation. With desktop and

wall mountable design, outstanding performance and quality, the TP-Link 8-Port 10/100Mbps + 3-Port

Gigabit Desktop Switch with 8-Port PoE+TL-SL1311MP is a great selection for expanding your network.