Quick Installation Guide
3G HSPA+ USB Adapter
MODEL NO. MA260
2 LED Explanation
LED
Status
Flashing Red
Solid Red
Flashing Green
Solid Green
Indication
No SIM/USIM card is inserted.
The Adapter is initializing.
The SIM/USIM card has registered to the network.
The network is available with a successful Internet connection.
1Hardware Installation
System Requirement
Operating System: Windows 7/Vista/XP 32/64-bit CPU: 500MHz Pentium or above
Hard Disk: 20G or above RAM: 128M or above
2
4
1Open the cover.
2Insert the SIM/USIM card and the Micro SD card in the direction indicated on the Adapter.
A Micro SD card is an optional accessory. You need to buy one yourself. To remove the Micro SD card, press it to eject it from the Adapter.
3Replace the cover.
4Plug the Adapter directly into the USB port on your computer.
3 |
Software Installation |
(The installation procedures in Windows 7/ Vista/ XP are similar. Here we use the procedures in Windows 7 as an example.) |
|||
|
|
||||
1 |
The following window will automatically appear |
3 |
Click Change to specify the destination |
5 |
The installation process may take 1~2 |
|
on your desktop. Click the Run AutoRun.exe. |
|
you wish the application to be located |
|
minutes. Please wait. |
or leave it in the default location. Click Next to continue.
2 |
The InstallShield Wizard window will |
4 Click Install to begin the installation. |
6 The following screen will then appear. |
|
appear. Click Next to continue. |
Click Finish to complete the setup. |
|||
|
After installation, the 
icon will appear on your desktop. Doubleclicking the icon can
start the utility.
7106504080
Loading...