This guide is a complement of Quick Installation Guide. The Quick Installation
Guide provides instructions for quick internet setup, while this guide contains
details of each function and demonstrates how to configure them.
When using this guide, please notice that features of the Mobile Wi-Fi may
vary slightly depending on the model, the software version you have, your
location, system language, and internet service provider. All screenshots,
images, parameters and descriptions documented in this guide are used for
demonstration only.
Conventions
In this guide the following conventions are used:
ConventionDescription
Underlined
Underlined words or phrases are hyperlinks. You can click to redirect to a website or a
specific section.
Teal
>
Note:
Tips:
Contents to be emphasized and texts on the web page are in teal, including the menus,
items, buttons and so on.
The menu structures to show the path to load the corresponding page. For example,
Advanced > Wireless > Black List means the Black List page is under the Wireless menu
that is located in the Advanced tab.
Ignoring this type of note might result in a malfunction or damage to the device.
Indicates important information that helps you make better use of your device.
Wi-Fi Speed/Coverage Disclaimer
*Maximum wireless signal rates are the physical rates derived from IEEE
Standard 802.11 specifications. Actual wireless data throughput and wireless
coverage are not guaranteed and will vary as a result of 1) environmental
factors, including building materials, physical objects, and obstacles, 2) network
conditions, including local interference, volume and density of traffic, product
location, network complexity, and network overhead, and 3) client limitations,
including rated performance, location, connection, quality, and client condition.
Battery Life Disclaimer
*Battery life estimates obtained through testing in a laboratory setting.
1
More Info
The latest software, management app and utility are available at Download
Center at www.tp-link.com/support.
The Quick Installation Guide can be found in the same place you found this guide
or inside the package of the Mobile Wi-Fi.
Specifications can be found on the product page at https://www.tp-link.com.
A Technical Support Forum is provided for you to discuss our products at
https://forum.tp-link.com.
Our Technical Support contact information can be found at Contact Technical
Support page at www.tp-link.com/support.
2
Chapter 1
Get to Know About Your
Mobile Wi-Fi
This chapter introduces what the Mobile Wi-Fi can do and its appearance.
It includes the following sections:
• Product Overview
• Physical Description
Chapter 1
Get to Know About Your Mobile Wi-Fi
1. 1. Product Overview
The Faster Connections, The More You Can Do
Just insert a 4G SIM card to create your reliable personal Wi-Fi hotspot and
share instant 4G/3G connectivity with friends. The Mobile Wi-Fi, supporting the
latest generation 4G LTE network, can reach a faster download speed so that
users can enjoy HD movies without interruption, download files in seconds, and
hold a video chat without dropouts.
Artful Little Gadget and Built-in Battery for Life on the Go
The TP-Link Mobile Wi-Fi features a compact, elegant design and rechargeable
powerful battery very suitable for travel, business trips and outdoor activities.
With added flexibility, the device can be charged via a micro USB cable connected
to an adapter, laptop or portable charger for endless hours of 4G sharing.
Easy Management with the tpMiFi App
With the tpMiFi App, you can conveniently access and manage the Mobile Wi-Fi
right on your iOS/Android devices. The tpMiFi app allows you to set data limits,
control Wi-Fi access, send messages, and share media files to/from a removable
micro SD card.
3
Chapter 1
C
1. 2. Physical Description
1. 2. 1. The Exterior
560MB
5.0M/S
arrier Name
Menu ButtonPower Button
Get to Know About Your Mobile Wi-Fi
Button Explanation
ButtonDescription
• Press to enter the Menu Screen from the Home Screen.
Menu Button
Power Button
• Press to switch between icons or options.
• Press to light on the screen.
• Press and hold to power on/off the Mobile Wi-Fi.
• Press to turn on/off the screen display.
• Press to select an icon.
4
Chapter 1
Get to Know About Your Mobile Wi-Fi
Screen Display
Home ScreenDisplayed ItemIndication
Indicates the signal strength of the current network.
Indicates successful network connection and the current network
type: 4G+, 4G or 3G.
Indicates you are in roaming service.
Indicates that there is un-read message(s) and the number of them.
Displays the Wi-Fi status and the number of connected wireless
devices.
Indicates the total data used. It will be cleared after the Mobile Wi-Fi
is reset.
560MB
5.0M/S
Carrier Name
4G+/4G/3G
R
2
Displays the remaining battery power.
560MB
Indicates the current download speed of the data transmission.
5.0 M/S
Menu ScreenMenuDescription
Home
Device Info
Displays the information of data, signal strength, battery life and so
on.
Displays the SSID (network name), password and login address of
the Mobile Wi-Fi.
Device Info
Power Saving
WPS
Wi-Fi Band
Network Mode
Data Roaming
App Download
If enabled, the Wi-Fi will be shut down if no wireless devices are
connected to the Mobile Wi-Fi for 10 minutes; and the Wi-Fi range
will be midium. For more information, please refer to Save the Mobile
Wi-Fi’s Power.
To enable the WPS function. Enable this function and immediately
press the WPS button on your wireles device. A success message
will appear on the screen, indicating successful WPS connection.
To change the Wi-Fi band to 2.4GHz or 5GHz as needed.
To change the network mode: 4G preferred, 4G only or 3G only as
needed.
To enable or disable the Data Roaming function as needed. We
recommend you to enable it when you are out of the mobile carrier
service area.
Scan the QR code to download the tpMiFi app to manage your
Mobile Wi-Fi.
5
Chapter 1
1. 2. 2. The Interior
Get to Know About Your Mobile Wi-Fi
Micro SD Card Slot
Micro SIM Card Slot
Reset Button
ItemDescription
Micro SIM Card Slot
Micro SD Card Slot
Micro USB Input Port
Reset Button
Slide and lift up the slot cover, insert a Micro SIM card and slide the cover back to lock. A
nano SIM card must be converted using the provided SIM card tray.
Slide and lift up the slot cover, insert a SD card and slide the cover back to lock. The
inserted SD card can be used for storage and media sharing.
Plug in the USB cable to this port to charge your Mobile Wi-Fi or share contents in the
SD card.
With the Mobile Wi-Fi powered on, use a pin to press and hold this button until “Power
Off” appears on the screen to reset the Mobile Wi-Fi.
Micro USB Input Port
6
Chapter 2
Set Up Internet
Connection
This chapter introduces how to install the hardware and set up the internet
connection of your Mobile Wi-Fi.
It includes the following sections:
• Install the Hardware
• Connect to the Mobile Wi-Fi
Chapter 2
2. 1. Install the Hardware
2. 1. 1. Installation
1. Remove the cover.
Set Up Internet Connection
2. Slide and lift up the SIM card slot cover and insert the SIM card. And then slide
to lock the SIM card slot.
SIM
Note:
• A nano SIM card must be converted using the provided SIM card tray.
• The SIM card is not provided by TP-Link.
3. (Optional)Slide and lift up the SD card slot cover and insert a micro SD card.
The inserted SD card can be used for storage and media sharing.
Note:
• To learn how to store and share files via the SD card, please refer to Share Files on SD Card.
• The SD card is not provided by TP-Link.
4. Fit the battery into the slot.
8
Chapter 2
5. Replace the cover.
Set Up Internet Connection
1
2
2. 1. 2. Power On
Press and hold
Note:
To power off, press and hold
(power button) until the welcome screen appears.
(power button) until Power Off appears on the screen.
9
Chapter 2
Set Up Internet Connection
2. 2. Connect to the Mobile Wi-Fi
1. After the Mobile Wi-Fi is powered on, you will see the following screen.
4G+
0MB
0.0 K/S
Carrier Name
Note: If other messages appear on the screen, please refer to Q2 of FAQ.
2. Follow the instructions to connect to the Mobile Wi-Fi. Here are two methods.
Note: If you use a computer to connect to the Mobile Wi-Fi, please set your computer’s setting to
obtain an IP address automatically.
Method One: Using SSID and Wireless Password
a.Find the SSID (network name) and wireless password from the screen or on
the product label.
• On the screen:
1 ) Press
(menu button) to switch to the Device Info page.
Device Info
2 ) Press (power button) to enter the Device Info page.
Device Info
SSID: TP-Link_XXXX
Password: XXXXXXXX
Device Info
Login Address:
http://tplinkmi.net
10
Chapter 2
Connections are available
Wireless Network Connection
Set Up Internet Connection
• On the product label:
1 ) Remove the cover and the battery of the Mobile Wi-Fi.
2 ) Take down the SSID and Wireless Password printed on the product label.
MAC: XX-XX-XX-XX-XX-XX
IMEI: XXXXXXXXXXXXXXX
SSID:
TP-Link_XXXX
Wireless Password:
XXXXXXXX
b.Go to Wi-Fi settings of your smart device or click the network icon of your
computer, then select the SSID and enter the Wireless Password that you
found to join the Wi-Fi.
Smart DeviceComputer
< Settings
Wi-Fi
CHOOSE A NETWORK...
TP-Link_XXXX
Other...
Wi-Fi
OR
TP-LINK_XXXX
Connect automatically
Connect
Method Two: Via WPS (Wi-Fi Protected Setup)
If you have a WPS-supported device (such as Android phones or tablets), you
can connect to the Mobile Wi-Fi more easily using WPS button or PIN.
Note:
To use the WPS function, please make sure the SSID Broadcast function and wireless function are
enabled.
• Via the WPS button
1 ) Press
menu.
(menu button) to enter the menu page and switch to the WPS
11
Chapter 2
2
1
R
4G+
WPS
Set Up Internet Connection
2 ) Press (power button) to enter the WPS page. Then the Mobile Wi-Fi will
enable WPS and starts to scan for WPS-supported devices.
WPS
Connecting
3 ) On your WPS-supported device, go to Settings, turn on Wi-Fi, and click
Connect via WPS within 2 minutes.
Note:
The interfaces of the WPS function may vary in different wireless devices.
12
Chapter 2
Set Up Internet Connection
4 ) The status of WPS will change from Connecting to Succeeded indicating
your WPS-supported device is connected to the Mobile Wi-Fi.
WPS
Succeeded
• Via the PIN
1 ) On your WPS-supported device, go to Settings, turn on Wi-Fi, and go to
the WPS page to get the PIN.
Note:
The interfaces of the PIN verification may vary in different wireless devices.
13
Chapter 2
Set Up Internet Connection
2 ) On your smart phone, visit http://tplinkmifi.net, and log in with the default
password: admin.
3 ) Go to Device > Advanced > WPS, check the PIN box and enter the PIN of
your WPS-supported device in this filed.
14
Chapter 2
Set Up Internet Connection
4) Click Start to start the WPS process, and the Current Status will change
from Idle to Succeed indicating your WPS-supported device is connected
to the Mobile Wi-Fi.
15
Chapter 3
Login
This chapter introduces 3 methods to log in to the web management page.
Demonstrations in this guide use the phone web management interfaces, while
some use the computer as those functions are only available on the computer’s
web management page.
Before login, make sure your device is connected to the Mobile Wi-Fi’s SSID. If
not, refer to Chapter 2 for detailed instructions.
This chapter includes the following sections:
• Via Phone Login Entry
• Via PC Login Entry
• Via tpMiFi App
Chapter 3
Login
3. 1. Via Phone Login Entry
1. On your smart phone, visit http://tplinkmifi.net, and log in with the default
password: admin.
2. Create a new login password for security purposes and click Done.
3. Use the password you just created for future logins.
3. 2. Via PC Login Entry
On the PC web management interfaces, you can enjoy more features, such as
DHCP settings.
17
Chapter 3
1. Visit http://tplinkmifi.net from the PC entry, and log in with the password:
admin.
Login
2. Go to Wizard, create a new login password for security purposes and click
Confirm.
3. Use the password you just created for future logins.
3. 3. Via tpMiFi App
1. Search “tpMiFi“ at the App Store or Google Play Store or simply scan the QR
code to download the tpMifi app.
18
Chapter 3
2. Connect your device to the Mobile Wi-Fi.
3. Launch the tpMiFi app and log in with the default password: admin.
Login
4. Create a new password for security purposes.
19
Loading...
+ 53 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.