TP-Link Deco-P9-3-pack User Manual
Whole Home Powerline Mesh Wi-Fi System
Seamless Roaming | Parental Controls | Easy Setup | Powerline Backhaul
User Guide
AC1200 + AV1000 Whole Home Powerline Mesh Wi-Fi System
Deco P9
1910012568 REV1.0.0
Contents
About This Guide ···················································· 1
Appearance ······························································· 2
Set Up Your Deco ··················································· 3
Dashboard ·································································· 5
Wi-Fi Settings···························································· 6
Parental Controls ···················································· 7
QoS················································································· 8
Advanced Features ··············································· 9
Update Decos ························································13
Managers ··································································14
Authentication ························································15
About This Guide
This guide provides a brief introduction to Deco Whole Home Powerline Mesh Wi-Fi System and the Deco app, as well as regulatory information.
Please note that features of Deco may vary slightly depending on the model and software version you have, and on your location, language and internet
service provider. All images, parameters and descriptions documented in this guide are used for demonstration only.
Conventions
In this guide, the following conventions are used:
Convention Description
Deco
Underline
Teal
Note:
Tips:
Stands for Deco Whole Home Powerline Mesh Wi-Fi System/
Unit.
Hyperlinks are in teal and underlined. You can click to
redirect to a website or a specic section.
Key information appears in teal, including management page
text such as menus, items, buttons and so on.
Ignoring this type of note might result in a malfunction
or damage to the device.
Indicates important information that helps you make
better use of your device.
More Info
• Specific product information can be found on the product page at
https://www.tp-link.com.
• A community is provided for you to discuss our products at
https://community.tp-link.com.
• Our Technical Support contact information can be found at the Help
center of the Deco app and the Contact Technical Support page at
https://www.tp-link.com/support.
Speed/Coverage/Device Quantity Disclaimer
Maximum wireless transmission rates are the physical rates derived from
IEEE Standard 802.11 specifications. Range, coverage, and maximum
quantity of connected devices are based on test results under normal
usage conditions. Actual wireless data throughput. wireless coverage,
and quantity of connected devices are not guaranteed and will vary
as a result of 1) environmental factors, including building materials,
physical objects, and obstacles, 2) network conditions, including local
interference, volume and density of traffic, product location, network
complexity, and network overhead, and 3) client limitations, including
rated performance, location, connection quality, and client condition.
Seamless Roaming Disclaimer
Clients need to support 802.11k/v/r and may require additional set up.
Performance may vary depending on the client device.
1
Appearance
Each Deco has an LED that changes color according to its status, two RJ-45 Ethernet ports, a power slot, and a Reset button. See the explanation
below:
Yellow pulse:
Deco is resetting.
Yellow solid:
Deco is starting up.
Blue pulse:
Deco is ready for setup.
Blue solid:
Deco is setting up.
White pulse:
Deco is upgrading rmware.
White solid:
Deco is registered and all is well.
Note:
For safety, only use the product in upright direction as the gure shows.
Ethernet Ports:
For connecting Deco to your modem, the
Ethernet outlet or other internet devices.
Red pulse:
Deco is disconnected from main Deco.
Red solid:
Deco has an issue.
Power Slot:
For connecting Deco to the power socket via
the provided power cable.
Reset Button:
Press to reset Deco to factory default settings.
2
Set Up Your Deco
Follow the steps below to set up your Deco Whole Home Mesh Wi-Fi System.
1. Download and install the Deco app
Scan the QR code below or go to Google Play
or the Apple App Store to download the Deco
app.
Install the app on your Android or iOS
smartphone or tablet.
or
2. Log in or sign up with TP-Link ID
Open the app. Use your TP-Link ID to log in.
If you don’t have a TP-Link ID, tap Sign Up. The
Deco app will guide you through the rest.
3. Connect Deco to your modem
Find and power o your modem. Connect your
Deco to the modem and power them both on.
If you don't have a modem, connect the
Ethernet outlet directly to your Deco.
3
4. Select a location
5. Create your Wi-Fi network
6. Add more Decos
Select a location for this Deco. If its location
is not listed, you can create a new one by
choosing Custom.
Set a network name and a password. These
will be the name and password you use to
connect your devices to Wi-Fi.
You can add more Decos to expand Wi-Fi
coverage. The app will guide you through the
process of adding more Decos one by one.
4
Dashboard
After you successfully set up your Deco network, you will see the dashboard of the Deco app. Here you can view the connected devices and their
internet speeds, tap
(Internet) to check the working status of all Decos, and tap (More) to display more features.
View connected devices
Check the working status of all Decos Display more features
5
Loading...