TOYOTA Verso User Manual

Yaris Verso

Brief guide

Brief guide

Index

Introducing Yaris Verso ........................................... 2

Lock system............................................................ 3

Seats....................................................................... 4

Bonnet and fuel tank opening................................ 5

Dashboard.............................................................. 6

Lights and wipers ................................................... 9

Heating and A/C control ........................................ 10

Power windows...................................................... 11

Gear change........................................................... 11

Tyre change ......................................................... 12

Service.................................................................. 12

1

Introducing
Yaris Verso

Congratulations on selecting a new
Yaris Verso!

Now you can begin enjoying this outstanding vehicle
immediately with this Brief Guide to basic vehicle
operations.
This Brief Guide contains a summary description of basic
operations so that you can locate and use the vehicle’s
main equipment and features, quickly and easily.
This Brief Guide does not replace or substitute the
Owner’s Manual which you will find in the vehicle’s
glove compartment. It is important that you review the
full Owner’s Manual as well as any further
supplementary manuals. This will allow you to familiarise
yourself with the operating and safety instructions and to
handle the vehicle within its limitations.
Your dealership and the entire staff of Toyota wish you
many years of enjoyable driving in your new Yaris Verso.

PS: All information contained in this Brief Guide is current at the time of
printing. Toyota reserves the right to make changes at any time without notice.

Think before you drive !

Fit child seat

in the back

2

Stow loose objects

safely in the boot

10 seconds... that can save your life

European Road Safety Campaign

with the support of the European Commission

Adjust seat and

head restraint

Fasten front and

rear seatbelts

at all times

Lock system

Key number plate

Your key number is shown on the
plate. If you should lose your keys
or if you need additional keys,
duplicates can be made using the
key number.

Engine immobiliser system

The engine immobiliser system
is a theft prevention system.
The engine will start only when
the electronic code in the chip
inside the key corresponds to
the registered ID code of the
vehicle.

Wireless remote control

Your vehicle has a wireless
remote control system that can
lock or unlock all the side doors
and back door from a distance
within approximately 1m of the
vehicle.

Locking operation

Unlocking operation

Locking and unlocking the
doors.
To lock and unlock all the side
doors and back door, push the
switches of the transmitter
slowly and securely.

International Security Register.
Your new Yaris Verso has a
unique number etched into all
window glass. The ISR operates
a 24 hour service which can
provide peace of mind for your
purchase.

3

Seats

Seats
Adjusting front seats:

1. Seat position adjusting lever

Pull the lever up. Then slide the seat
to the desired position with slight
body pressure and release the lever.

2. Seat height adjusting knob

(on some models)

3. Seat back angle adjusting lever

Lean forward and pull the lever up.
Then lean back to the desired angle
and release the lever.

Retracting rear seat

1

2

1. After storing the head rest to the
lower most position, fold the rear
seatback by pulling the lever, as
shown.

34

3. Use the grip to move the seat to
the front and retract in the floor.

5

5. Install the seat lock covers. 6. Release the lock as shown, and

78

7 Release the lock lever at the edge

of the center seat as shown.
While holding down the lock
lever, fold the seat leg on the
right side of the center seat.

9, 10

9. Remove the covers underneath the seat

10. Retract the left side seat following the same

2. Pull up the lever at the rear of
the seat as shown and pull up
the seat using the grip.

4. Install the floor board.

6

fold the center seatback.

8. Move the center seat towards
the floor and remove it.

cushion, and install them to the hooks.

procedures as the right side.

4