Toshiba IK527A User Manual

IK" 527A

CCD MONOCHROME CAMERA

INSTRUCTION MANUAL

CS-Mount only

IMPORTANT SAFEGUARDS

1. Read Instructions

All the safety and operating instructions should
be read before the product is operated.

2. Retain Instructions

The safety instructions and instruction manual
should be retained for future reference.

3. Heed Warnings

All warnings on the product and in the instruction
manual should be adhered to.

4. Follow Instructions

All operating and use instructions should be
followed.

5. Cleaning

Disconnect this video product from the power
supply before cleaning.

6. Attachments

Do not use attachments not recommended by the
video product manufacturer as they may cause
hazards.

7. Water and Moisture

Do not use this video product near water — for
example, near a bath tub, wash bowl, kitchen
sink, or laundry tub, in a wet basement, or near a
swimming pool and the like.

8. Accessories

Do not place this video product on an unstable

cart, stand, tripod, bracket or table. The video

product may fall, causing serious injury to a child
or adult, and serious damage to the product. Use
only with stand, tripod, bracket, or table
recommended by the manufacturer, or sold with
the video product. Any mounting of the product
should follow the manufacturer's instructions,
and should use a mounting accessory
recommended by the manufacturer.

9. Ventilation

This video product should never be placed near
or over a radiator or heat register. This video
product should not be placed in a built-in
installation such as a bookcase or rack unless

proper ventilation is provided or the
manufacturer's instructions have been adhered

to.

10. Power Sources

This video product should be operated only from
the type of power source indicated on the

marking label. If you are not sure of the type of
power supply to your location, consult your
product dealer.

11. Power-Cord Protection

Power-Supply cords should be routed so that

they are not likely to be walked on or pinched by

items placed upon or against them, paying
particular attention to cords at plugs, screws, and
the point where they exit from the product.

12. Lightning

For added protection for this video product during
a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the
wall outlet and disconnect the power supply and
cable system . This will prevent damage to the
video product due to lightning and power - line
surges.

13. Overloading

Do not overload power supply and extension
cords as this can result in a risk of fire or electric
shock.

14. Object and Liquid Entry

Never push objects of any kind Into this video
product through openings as they may touch
dangerous voltage points or short-out parts that
could result in a fire or electrical shock. Never spill
liquid of kind on the video product.

15. Servicing

Do not attempt to service this video product
yourself as opening or removing covers may
expose you to dangerous voltage or other

hazards. Refer all servicing to qualified service

personnel.

16. Damage Requiring Service

Disconnect this video product from the power

supply and refer servicing to qualified service

personnel under the following conditions.

a. When the power-supply cord or plug is

damaged.

b. If liquid has been spilled, or objects have fallen

into the video product.

c. If the video product has been exposed to rain

or water.

d. If the video product does not operate normaiiy

by following the operating instructions in the
instruction manual. Adjust only those controls
that are covered by the instruction manual as
an improper adjustment of other controls may
result in damage and will often require
extensive work by a qualified technician to

restore the video product to its normal

operation.

e. If the video product has been dropped or the

cabinet has been damaged.

f. When the video product exhibits a distinct

change in performance - this indicates a need

for service.

17. Replacement Parts

When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer of have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or

other hazards.

18. Safety Check

Upon completion of any service or repairs to this
video product, ask the service technician to
perform safety checks to determine that the video
product is in proper operating condition.

This installation should be made by a qualified service person and should
conform to all local codes.

rÎskof^l^trÎcshock

CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

A

A

DO NOT OPEN

DO NOT REhlOVE COVER (OR BACK)

NO USER SERVICEABLE PARTS INSIDE

The lightning flash with arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of uninsulated "dangerous
voltage" within the product’s enclosure that may be of sufficient magni
tude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance (ser
vicing) instructions in the literature accompanying the appliance.

A

• The CAUTION label, shown on the left,

is attached on the bottom of camera.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.

CAUTION

• CONNECT 24V AC UL LISTED CLASS 2

POWER SUPPLY.

INFORMATION

This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commerciai environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful in
terference to radio communications. Operation of this equipment in a resi
dential area is likely to cause harmful interference in which case the user will

be required to correct the interference at his own expense.

USER-INSTALLER CAUTION: Your authority to operate this FCC verified

equipment could be voided if you make changes or modifications not ex

pressly approved by the party responsible for compliance to Part 15 of the
FCC rules.

THIS CLASS A DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE

CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATIONS.
CET APPAREIL NUMÉRIQUE DE LA CLASSE A RESPECTE TOUTES LES
EXIGENCES DU RÈGLEMENT SUR LE MATÉRIEL BROUILLEUR DU CANADA.